Hybrid Racing Shifter Cable Bushing for Honda & Acura (07+)

  • Please Check Vehicle Fitment Tab for Your Application

  • Corrosion Resistant, Won't Rust

  • Easy to Install

  • Reduces Unwanted Slack in Shifter Feeling

$63.98 $79.98 $79.98

/
Subscription
Availability needs to be checked. See the message below.
Delivery truck icon Ships in 3-6 Weeks
Delivery truck icon Ships in 3-6 Weeks
In stock · available
Available to order

Part # HYB-SCB-01-08

Vehicle compatibility

Check compatibility with your vehicle.

Description

Hybrid Racing Competition Shifter Cable Bushing Kit - Manual Honda & Acura (2007+)

If your shifter feels vague, sloppy, or disconnected, a worn shifter cable bushing is almost always the reason. From the factory these bushings are soft rubber, and after years of heat and use that rubber wears out and lets the shifter move around instead of moving the gear selector. That play is the slack you feel every time you grab a gear. Our Competition shifter bushing kit replaces that tired rubber with a direct, precise link between your hand and the transmission. We launched the original over a decade ago, and this new generation improves it in every way that counts, and it fits almost every manual Honda and Acura built since 2007.

Why Our Shifter Bushing Is Different

Here's what set our design apart the day we launched it, and it's still what matters most: we build a steel bearing into the larger bushing. That bearing lets the gear selector move without binding, which is the difference between a shifter that's tight and smooth and one that's just stiff. Plenty of upgraded bushings kill the slop but add friction doing it, so your shifter ends up feeling notchy. Ours don't. You get the direct, mechanical feel without the binding, and that steel bearing has been our edge for more than ten years.

Modern Materials, Built To Last

The Competition version is where we raised the bar again. Each shifter cable bushing is injection-molded black Delrin, which is seriously tough material. It shrugs off impacts and chemicals, resists high cyclic fatigue, and is rated to run up to 250 degrees Fahrenheit, hotter than anything it'll see in your car. These bushings are actually rated to handle more force than the shifter cables themselves. The center bushing is machined from 6061 aluminum with a protective anodized finish, so it's strong exactly where it needs to be.

Delrin and aluminum also fix a problem the old rubber parts had: corrosion. These won't rust, so they keep feeling great for years instead of degrading in the damp and road grime. Installed with the supplied high-temperature grease, they stay smooth for the long haul.

Easier To Install Than Ever

We made them simpler, not just stronger. There are no spiral clips to fight with anymore, and because each bushing self-locks into the housing, you don't need any special tools. It seats, it locks, and you're done. It's one of the most satisfying upgrades you can knock out in your driveway in a few minutes, and you feel the difference the very first time you row through the gears.

What It Fixes

The bottom line is feel. A fresh shifter bushing eliminates the unwanted slack that worn factory rubber lets into your shifter, so every gear change lands tighter, more direct, and more confident. No more vague throws, no more hunting for the gate, no more play between you and the transmission. Just a clean, mechanical connection that makes the car more fun to drive every time you shift.

Fitment

This shifter cable bushing kit fits manual transmissions only, and it covers almost every Honda and Acura built since 2007. Find your car below:

Make Model Years
HondaCivic2007-2011
HondaCivic2012-2015
HondaCivic2016-2021
HondaCivic2022+
HondaCivic Type-R (FK2)2015-2017
HondaCivic Type-R (FK8)2017-2021
HondaCivic Type-R (FL5)2023+
HondaAccord2008-2012
HondaAccord2013-2018
HondaAccord2018-2020
HondaFit / Jazz2009-2020
HondaElement2009-2010
HondaCR-Z2010-2016
AcuraTL Type-S2007-2008
AcuraTL SH-AWD2010-2014
AcuraTSX2009-2014
AcuraILX2013-2015
AcuraIntegra2023+
AcuraIntegra Type-S (DE5)2024+

Manual transmission only. If your car is an automatic, this kit is not for it. With this many applications sharing the part, confirm your car is on the list and running a manual before you order.

Who This Is For

This is for anyone tired of a loose, sloppy shifter who wants that crisp, mechanical feel back, whether your factory bushings have simply worn out or you want to sharpen up a car that's otherwise dialed in. It's an inexpensive upgrade with a genuinely big payoff in how the car feels to drive. Grab a set, grease them up, snap them in, and enjoy every shift.

Product: Hybrid Racing Competition shifter cable bushing kit. Material: injection-molded black Delrin bushings, 6061 anodized aluminum center bushing. Features: integrated steel bearing to prevent binding, corrosion-proof, rated to 250°F and beyond cable strength. Install: tool-free, self-locking, no spiral clips, high-temp grease included. Transmission: manual only. Fits: see the full application list above.

FITMENT

Fits: 

  • Fits almost all Honda cars newer than 2007! 
    * Manual Transmissions Only

    Honda Civic
    2007-2011 Honda Civic
    2012-2015 Honda Civic
    2015-2017 Honda Civic Type-R (FK2)
    2016-2021 Honda Civic
    2017-2021 Honda Civic Type R (FK8)
    2022-2026 Honda Civic
    2023-2026 Honda Civic Type R (FL5)

    Honda Accord
    2008-2012 Accord
    2013-2017 Accord
    2018-2020 Accord Sport

    Honda Fit / Jazz
    2009-2020 Honda Fit

    Honda Element
    2009-2010 Honda Element

    Honda CR-Z
    2010-2016 Honda CR-Z

    Acura
    2007-2008 Acura TL Type-S
    2010-2014 Acura TL SH-AWD
    2009-2014 Acura TSX
    2023-2026 Acura Integra Base/ASpec
    2024-2026 Acura Integra Type S
    2013-2015 Acura ILX

INSTALL GUIDE
IN THE BOX

(1) Left-Right Bushing (Delrin)
(1) Front-Back Race (Delrin)
(1) Front-Back Race Insert (Aluminum)
(1) Packet of Grease
(2) Cotter Pins

Install guide

Hybrid Racing Competition Shifter Cable Bushings Install Guide

Black Hybrid Racing shifter cable bushing with logo facing up beside its separated center insert.
New Hybrid Racing bushing pre-assembled; hold logo up and separate the center insert before install.
Difficulty
Easy
Steps
8
Time required
15 min – 30 min
Category
Drivetrain

Tools

  • Flathead Screwdriver / Pry Tool
    Quantity: —

01 OEM bushing removal

Two shifter cable ends with OEM rubber bushings after removal from the transmission bracket.
OEM rubber bushings still seated on the shifter cable ends, ready to be pried out with a flat tool.
Hand holds shifter cable end while flat screwdriver pries out the OEM rubber bushing.
Use a flat-tipped screwdriver to pry the OEM rubber bushing out of the shifter cable end.
Flat screwdriver prying OEM rubber bushing from shifter cable end beside a cable with bushing removed.
Pry the OEM rubber bushing out of the shifter cable end with a flat-tipped screwdriver; the lower cable shows it removed.
  1. noteSince the process to remove the shifter cable bushings will be the same for all cars we will depict that. The method or process to remove the shifter cables from the car will depend on the specific model and application.
  2. noteYou do not need to remove the shifter cables to install the new bushings. However to MUST remove them from the transmission cable bracket. Most applications will have spring C clips that hold them in place. Or they will be bolted to the bracket. You must remove them from the bracket so they can be moved freely.
  3. cautionIf you do not remove them from the OEM brackets, you risk bending and ruining the shifter cable. BE VERY CAREFUL NOT TO BEND THEM.
  4. Begin this process by removing the shifter cables from the transmission bracket. (not shown)
  5. Use a flat-tipped screwdriver or similar pry tool and pry the OEM rubber bushing out. You can spray lube on the ends to help.

02 OEM bushing removal

Hand holds black OEM bushing with metal tool through its center beside the shifter cable end.
Larger OEM bushing held after removal from the shifter cable end, with tool through its center.
Hand removes larger black OEM bushing from shifter cable end with a metal tool.
Follow the same process to remove the larger bushing from the shifter cable end.
Hand holds metal shifter cable end while flat screwdriver pries black OEM bushing free of the eyelet.
Pry the larger black OEM bushing out of the metal eyelet on the shifter cable end.
  1. Follow the same process and remove the larger bushing.

03 Seperate the HR bushing

Hands hold the black Hybrid Racing bushing with logo facing upward on a wooden surface.
Hold the bushing with the Hybrid Racing logo facing upwards before separating the center.
Hands hold Hybrid Racing bushing with center aligned to large openings in the Delrin ring
Rotate the center bushing so it aligns with the large portions of the Delrin ring as marked.
Hands hold the separated Hybrid Racing Delrin outer case and aluminum center bushing after removal.
After rotating to align, the aluminum center bushing is pushed outward and fully separated from the Delrin case.
  1. The new Hybrid Racing bushing comes pre-assembled in the package. You must remove the center bushing before installing it in the shifter cable end ring.
  2. This process is very easy. Hold the bushing with the Hybrid Racing logo facing upwards.
  3. Use your fingers and rotate the center bushing so that it aligns with the large portions of the delrin ring.
  4. Push the aluminum bushing outward, separating it from the Delrin case.

04 Install small bushing

Hands hold small Delrin bushing with arrows marking tabs to compress for shifter cable end.
Compress the tabs on the small Delrin bushing (arrows) so it can clip into the cable end.
Hands compress Delrin bushing tabs to slide it into the shifter cable end.
Squeeze the bushing tabs and align it to slide into the cable end until it snaps in place.
Hand holds shifter cable end with small Delrin bushing snapped into place on wooden surface.
After compressing the tabs, the small bushing snaps fully into the cable end to complete installation.
  1. The tabs of the Delrin bushing must be compressed so it can clip into the cable end.
  2. Be sure to align it correctly, squeez the tabs and slide the bushing into the cable end.
  3. You will hear the bushing "snap" into place. Once that happens, the installation is complete.

05 Install main bushing

Hands hold the main bushing, four tabs arrowed, above the shifter cable end.
Depress the four tabs on the main bushing before sliding it into the cable end.
Hand holds outer ring on shifter cable end beside Hybrid Racing main bushing on wood surface.
See the outer ring held on the cable end with tabs ready to face down, main bushing nearby before sliding it on.
Hands sliding the silver outer ring onto the shifter cable end while installing the main bushing
Slide the outer ring through the top of the cable end until the main bushing snaps into place.
  1. Similar to the previous step, the main bushing has four tabs that must be depressed before sliding it into the cable end.
  2. Make sure you have the shifter cable facing the correct way. The tabs that get depressed will face down on the shifter cable. So be sure you slide the outer ring through the top section of the cable.
  3. Slide the ring into place and make sure you hear it snap.

06 Add Super Lube

Hands apply Super Lube grease with PTFE from a packet onto the black center bushing above the shifter cable end.
Apply a bit of Super Lube grease with PTFE to the center bushing, then spread it evenly so the bushing moves smoother.
Hands hold Hybrid Racing center bushing with Super Lube grease applied around it above the Delrin ring.
Super Lube grease is applied around the Hybrid Racing center bushing and ready to be spread evenly.
Hands hold the black center bushing above the open shifter cable end with Delrin ring on the work surface.
Apply Super Lube grease with PTFE to the center bushing, then spread it evenly before reassembly.
  1. Even though the bushing and Delrin ring are very smooth, we recommend adding a bit of Super Lube grease with PTFE to the center bushing.
  2. This allows the bushing to move even smoother. Once applied to the bushing, spread it out evenly.

07 Insert the center bushing

Hands hold the black Hybrid Racing center bushing above the shifter cable end ring on a wooden surface.
Hold the lubed center bushing ready to align and insert into the ring on the shifter cable end.
Hands insert the greased center bushing into the shifter cable end ring.
Align the ring sides with the lubed center bushing and slide it in before rotating 90° to lock.
Hybrid Racing center bushing locked onto the end of the shifter cable
Center bushing inserted and rotated 90 degrees to lock it in place on the cable.
  1. Now that the bushing is lubed, you can insert it back into the bushing the same way it was removed.
  2. Aling the sides of the ring with the bushing and slide it in. Once inserted, rotate it 90* to lock it in place.
  3. The bushing should move freely and will not come out.

08 Grease and install

Hybrid Racing shifter cable bushings on cable ends, arrows marking the center openings
Arrows point to the bushing centers on the cable ends before greasing the gear selector pin and clipping them on.
Hybrid Racing shifter cable bushings with metal clips on both transmission gear selector pins.
Supplied clips hold the greased bushings onto the gear selector pins with cables reinstalled.
  1. You can now install the shifter cables back on the transmission. Use the supplied great and apply it on the gear selector pin.
  2. Use the supplied clips to hold the bushings onto the gear selector.
  3. Shift through all gears and make sure everything feels smooth.
  4. The installation is complete, now go rip!

Finishing up

Reinstall the shifter cables with the supplied grease on the gear selector pin and the supplied clips. Shift through all gears and confirm everything feels smooth. Installation is complete.

Revision 3 · Updated Nov 12, 2026

YOU MAY ALSO LIKE

RECENTLY VIEWED