Hybrid Racing Full Size K Swap Radiator for 92-95 Civic

  • Bolt in K-Swap Radiator for your Civic!

  • Integrated bungs to mount coolant temperature sending unit and fan switch.

  • Hybrid Racing Radiator cap included.

  • Dual Core Construction.

$479.99

/
Subscription
Availability needs to be checked. See the message below.
Delivery truck icon Ships in 3-6 Weeks
Delivery truck icon Ships in 3-6 Weeks
In stock · available
Available to order

Part # HYB-RAD-01-08

Vehicle compatibility

Check compatibility with your vehicle.

Description

Hybrid Racing Full-Size K-Swap Radiator - 92-95 Civic & 93-97 Del Sol

The radiator is one of those swap parts people leave until late and then discover nothing quite fits. We built this one specifically for a K-series sitting in a 92-95 Civic or a 93-97 Del Sol, so the mounting lines up with your chassis and the ports line up with your engine. No brackets to fabricate, no adapters to chase, no hoses routed the long way around because the inlet ended up on the wrong side. It's dual-core, all-aluminum, and fully TIG welded, sized to fill the opening and do its job in a swapped car.

Ports Where Your K-Series Actually Wants Them

This is the part that makes a swap-specific radiator worth having. We positioned the coolant inlet and outlet to match where a K-series puts its connections in these chassis, so you're running short, direct hoses instead of long loops reaching across the bay. Shorter runs mean fewer bends, less coolant sitting in rubber, and fewer places for something to eventually let go. It also just looks right when you close the hood, which matters on a build you've put this much into.

We also integrated the ports for the coolant temperature sending unit and the fan switch directly into the radiator. That's two more things you don't have to solve with adapters or inserts, and two fewer parts to be waiting on when you're trying to finish the car.

Bolts To Your Factory Support Tabs

It mounts to the factory lower support tabs, so there's no cutting, no drilling, and no chassis modification to get it in. That's how a swap part should work. You're already doing enough custom work everywhere else in this build, and the cooling system shouldn't add to it.

Running AC? Grab The Half-Size Instead

Sort this out before you order, because it's a real fork. This full-size radiator isn't compatible with our conversion AC kit. It fills the space the AC condenser needs, so the two can't coexist. If air conditioning is part of your plan, our half-size K-swap radiator is the one you want, since it's sized to leave the condenser room to fit. Decide on AC first, then pick the radiator, and you'll only buy one.

Plan On Two Fans

One thing to budget for up front: we recommend running two high-speed ten-inch cooling fans with this radiator. A core this size needs real airflow to keep temps in check when you're sitting still or crawling through traffic, and a swapped engine bay doesn't get much natural airflow at low speed. Treat the fans as part of the radiator purchase rather than something to sort out later, and your cooling will be handled properly from the first startup.

Specs

  • Core: 29" x 11.5" x 2"
  • Inlet / outlet: 1.25"
  • Construction: dual-core, all-aluminum, high-precision TIG welds
  • Integrated ports: coolant temperature sending unit and fan switch

Who Should Run This Radiator

This is for anyone building a K-swap in a 92-95 Civic or 93-97 Del Sol who isn't running AC and wants the cooling side to just work. Street car, track car, or a build still coming together on jack stands, this drops into your chassis, connects to your K-series without creative plumbing, and gives you the capacity to keep temps where they belong. Add a pair of fans, bolt it in, and move on to the next thing on the list.

Fits: 1992-1995 Honda Civic (EG) and 1993-1997 Honda Del Sol with a K-series swap. Construction: dual-core, all-aluminum, high-precision TIG welds. Core: 29" x 11.5" x 2". Inlet / outlet: 1.25". Integrated ports: coolant temp sending unit and fan switch, no adapters needed. Install: bolts to factory lower support tabs, no chassis modification. Recommended: two 10" high-speed cooling fans. Not compatible with: the Hybrid Racing conversion AC kit, use the half-size radiator for AC builds.

FITMENT
1992-1995 Honda Civic
1993-1997 Honda Del Sol
TECHNICAL DATA
  • Core: 29" x 11.5" x 2"
  • Inlet / Outlet: 1.25"
  • IN THE BOX
    (1) Fullsize Radiator
    (1) Hybrid Racing Radiator Cap

    Install guide

    K-Swap Radiator Install Guide

    Aluminum K-swap radiator with cooling fins, hose necks, drain bung, and Hybrid Racing cap.
    Cover view of the K-swap radiator showing fins, fittings, sensor bungs, and the Hybrid Racing radiator cap.
    Difficulty
    Easy
    Steps
    11
    Time required
    30 min โ€“ 1 hr
    Category
    Engine

    Tools

    • Wire Cutters
      Quantity: 1
    • Crimping Tool
      Quantity: 1

    01 Mount the fan using fan mounting hardware. (Contact Hybrid Racing if you do not have these)

    Black fan mounting ties, round clips, and foam strip laid out as radiator fan hardware.
    Fan mounting hardware: long ties with T-heads, round clips, and foam strip used to mount the fan.
    1. Mount the fan using fan mounting hardware. (Contact Hybrid Racing if you do not have these)

    02 Fan Mounting

    Black plastic fan tab pushed through radiator fins with a protective square between fan and core.
    Push the fan tabs through the radiator fins with protective squares installed between the fan and core.
    1. Mount the fan in the appropriate direction and push the tabs through the radiator fins. Install the protective squares between the radiator and the fan, making sure not to damage any of the cooling fins.

    03 Clip & slide

    Black plastic clip seated on the aluminum radiator core next to a black hose.
    After the tab is through, clip and slide the back piece so the fan stays secured tightly to the radiator.
    1. After the tab has been pushed through, clip and slide the back piece and make sure the fan is secured tightly to the radiator.

    04 Placing the radiator

    Aluminum K-swap radiator seated in the factory AC location on the blue chassis with OE rubber grommets.
    Place the radiator with OE rubber grommets into the factory AC location; fan should already be attached.
    1. Place the radiator along with the OE rubber grommets into the factory AC location. NOTE: The fan should be attached at this point.

    05 Drain Bolt Installation

    Brass wing-style drain bolt installed through a hole in the lower aluminum K-swap radiator tank.
    Drain bolt threaded into the radiatorโ€™s lower tank; thread sealer may be used if desired.
    1. Install the drain bolt. Thread sealer can be used if desired.

    06 Fan Switch Installation

    Fan switch sensor seated in the bottom bung on the K-swap radiator lower tank.
    Fan switch sensor installed in the radiatorโ€™s bottom bung, ready to connect to the conversion harness.
    1. Install the Fan Switch sensor into the bottom bung. (connect to your conversion harness)

    07 Temperature connect

    Coolant temperature sensor connected in the bung at the top of the radiator.
    Connect the coolant temperature sensor in the bung at the top of the radiator to the conversion harness.
    1. Connect the coolant temperature sensor in the bung at the top of the radiator. (connect to your conversion harness)

    08 Hose connection

    Black radiator hose and overflow line connected at the top tank of the aluminum radiator under the red core support.
    View the radiator hoses connected at the top of the radiator before filling the system with coolant and checking for leaks.
    1. Connect the proper radiator hoses, and fill system with coolant. (radiator hoses may vary due to different applications and parts) Once filled, check for leaks.

    09 Connector Location

    White factory fan connector with blue and black wires resting on the red radiator support bar.
    Locate the factory fan connector on the red support near where the stock OE radiator fan was.
    Blue crimp connectors on black fan wires hang near the headlight in the front engine bay.
    Factory fan wires with crimp-on connectors ready near where the stock OE radiator fan was located.
    1. Locate the factory fan connector located near the stock OE radiator fan was. The easiest way to connect the fan is to use the crimp on connectors, remove the stock plug and crimp on the wire connector ends.

    10 Connect the wires to the new slim fan.

    White electrical connector joining black fan wires near the headlight and red radiator support.
    Connect the slim fan wires at the white connector beside the headlight and radiator support.
    1. Connect the wires to the new slim fan.

    11 Let the car warm up, watching the coolant temperature level. When the fan kicks on, (either set by the fan switch, orโ€ฆ

    Hybrid Racing logo in black and lime green stylized shapes above HYBRID RACING text
    Hybrid Racing logo shown for the final K-swap radiator install step after warm-up checks.
    1. Let the car warm up, watching the coolant temperature level. When the fan kicks on, (either set by the fan switch, or KPRO) confirm the fan is turning the proper way. If it is not, switch the wires on the connector. If everything checks out ok you have successfully installed your K series swap radiator.

    Finishing up

    If you have any questions or comments, please email support at

    support@hybrid-racing.com

    Legal Disclaimer

    Users assume all cost and risk associated with these or any other items purchased from Hybrid Racing LLC.

    Parts sold or manufactured by Hybrid Racing LLC may not meet legal requirements for use on public roads. People thinking about purchasing product(s) from Hybrid Racing LLC should check with their local and state authorities for legality. It is the userโ€™s responsibility to know and comply with all local and federal laws and regulations. Use or installation of Hybrid Racing LLC products may affect user insurance and/or vehicle warranty coverage. It is the userโ€™s sole responsibility for consequences that may occur due to having the product installed in his/her vehicle.

    Hybrid Racing LLC assumes no legal responsibilities and/or liabilities, whether to userโ€™s vehicle, engine, person(s), and/or property(s), that result from the use of, or servicing of a vehicle of which a Hybrid Racing LLC product has been installed/attempted to be installed, or to any other vehicle(s) and/or person(s), regardless of whether or not this product has any involvement

    directly or indirectly and/or liability, and/or whether or not proper installation has been carried forth.

    All engines, engine parts and electrical components are for OFF ROAD USE ONLY/RACING

    VEHICLES ONLY. They are not for or to be used on public roads in the USA.

    Acquisition of a Hybrid Racing LLC product will act as an acknowledgement of the legal disclaimer stated herein.

    Hybrid Racing LLC reserves the right to change this disclaimer at any time without any prior

    consent or notification.

    Should you need to contact us our details are as follows:

    Hybrid Racing LLC, 12231 Industriplex Suite B, Baton Rouge, LA 70809

    www.hybrid-racing.com

    Revision 3 ยท Updated Nov 12, 2026

    YOU MAY ALSO LIKE

    RECENTLY VIEWED