K-Swap Radiator Install Guide
Guide for installing a K-swap radiator: mount the slim fan to the radiator, place the unit with OE grommets in the factory AC location, install drain bolt and sensors, connect hoses and coolant, wire the fan to the factory connector, then warm up and verify fan direction and operation.

- Difficulty
- Easy
- Steps
- 11
- Time required
- 30 min – 1 hr
- Category
- Engine
Important!! Please read the entire install guide twice before starting your installation. No, really it’s a good idea to read it twice before you begin so everything goes smooth. ;)
This product may not be legal for highway use. Hybrid Racing is not responsible for any direct or indirect, actual or incidental expense attributed to the use of any performance parts sold by Hybrid Racing LLC. Purchasers agree to all of the terms of this agreement upon the purchase of parts.
Before beginning the installation remove all of the factory radiator and AC components. NOTE: that these products were designed around a factory Honda Civic. If your chassis has been modified, or repaired because of damage some parts may not fit correctly and some minor modifications may be required.
Tools
- Quantity: 1Wire Cutters
- Quantity: 1Crimping Tool
01 Mount the fan using fan mounting hardware. (Contact Hybrid Racing if you do not have these)
02 Fan Mounting

- Mount the fan in the appropriate direction and push the tabs through the radiator fins. Install the protective squares between the radiator and the fan, making sure not to damage any of the cooling fins.
03 Clip & slide
04 Placing the radiator
05 Drain Bolt Installation
06 Fan Switch Installation
07 Temperature connect
08 Hose connection
09 Connector Location


- Locate the factory fan connector located near the stock OE radiator fan was. The easiest way to connect the fan is to use the crimp on connectors, remove the stock plug and crimp on the wire connector ends.
10 Connect the wires to the new slim fan.
11 Let the car warm up, watching the coolant temperature level. When the fan kicks on, (either set by the fan switch, or…
- Let the car warm up, watching the coolant temperature level. When the fan kicks on, (either set by the fan switch, or KPRO) confirm the fan is turning the proper way. If it is not, switch the wires on the connector. If everything checks out ok you have successfully installed your K series swap radiator.
Finishing up
If you have any questions or comments, please email support at
support@hybrid-racing.com
Legal Disclaimer
Users assume all cost and risk associated with these or any other items purchased from Hybrid Racing LLC.
Parts sold or manufactured by Hybrid Racing LLC may not meet legal requirements for use on public roads. People thinking about purchasing product(s) from Hybrid Racing LLC should check with their local and state authorities for legality. It is the user’s responsibility to know and comply with all local and federal laws and regulations. Use or installation of Hybrid Racing LLC products may affect user insurance and/or vehicle warranty coverage. It is the user’s sole responsibility for consequences that may occur due to having the product installed in his/her vehicle.
Hybrid Racing LLC assumes no legal responsibilities and/or liabilities, whether to user’s vehicle, engine, person(s), and/or property(s), that result from the use of, or servicing of a vehicle of which a Hybrid Racing LLC product has been installed/attempted to be installed, or to any other vehicle(s) and/or person(s), regardless of whether or not this product has any involvement
directly or indirectly and/or liability, and/or whether or not proper installation has been carried forth.
All engines, engine parts and electrical components are for OFF ROAD USE ONLY/RACING
VEHICLES ONLY. They are not for or to be used on public roads in the USA.
Acquisition of a Hybrid Racing LLC product will act as an acknowledgement of the legal disclaimer stated herein.
Hybrid Racing LLC reserves the right to change this disclaimer at any time without any prior
consent or notification.
Should you need to contact us our details are as follows:
Hybrid Racing LLC, 12231 Industriplex Suite B, Baton Rouge, LA 70809
www.hybrid-racing.com








