Hybrid Racing K-Swap Fullsize Radiator for 96-00 Civic

  • Bolt in K-Swap Radiator for your Civic!

  • Integrated bungs to mount coolant temperature sending unit and fan switch.

  • Hybrid Racing Radiator cap included.

  • Dual Core Construction.

$383.99 $479.99 $479.99

/
Subscription
Availability needs to be checked. See the message below.
Delivery truck icon Ships in 3-6 Weeks
Delivery truck icon Ships in 3-6 Weeks
In stock · available
Available to order

Part # HYB-RAD-01-11

Vehicle compatibility

Check compatibility with your vehicle.

Description

Each K-Series swap radiator was carefully designed by Hybrid Racing to take into account both the chassis' dimensions and mounting points, as well as the K-Series' motor's coolant inlet and outlet. These radiators simplify the K-Series engine swap by eliminating the need for custom mounting brackets and by providing a guaranteed fit for your specific swap.

All Hybrid Racing radiators feature dual-core, all-aluminum construction with high-precision TIG welds. This radiator integrates the necessary ports for the Coolant Temperature Sending Unit and the Fan Switch, eliminating the need for special adapters and inserts.

How is this radiator better than the OEM radiator?

This question has several answers. First, this Hybrid Racing full-size K-Swap radiator features all aluminum, and fully tig welded construction. As a result, it's less likely to leak or crack like the OEM unit which uses an aluminum core and plastic end tanks. Second, the coolant ports on all Hybrid Racing K swap radiators are relocated to allow the use of shorter coolant hoses when used in conjunction with a K series motor.

Do I have to modify my chassis to make this radiator fit?

No. This radiator is a complete bolt-on part. It mounts to the factory lower support tabs. We recommend using two high-speed ten-inch cooling fans.

Is this radiator compatible with the Hybrid Racing AC kit for my chassis?

NO. This unit is not compatible with the Hybrid Racing conversion AC kit. If you want to use AC, you must use the Hybrid Racing Half-Size radiator so the AC condenser has room to fit.
 
Dimensions
Core: 29" x 12.75" x 2"
Inlet / Outlet: 1.25"

FITMENT
Fits:
  • 96-00 Honda Civic with K-Swap

Install guide

K-Swap Radiator Install Guide

Aluminum K-swap radiator with cooling fins, hose necks, drain bung, and Hybrid Racing cap.
Cover view of the K-swap radiator showing fins, fittings, sensor bungs, and the Hybrid Racing radiator cap.
Difficulty
Easy
Steps
11
Time required
30 min – 1 hr
Category
Engine

Tools

  • Wire Cutters
    Quantity: 1
  • Crimping Tool
    Quantity: 1

01 Mount the fan using fan mounting hardware. (Contact Hybrid Racing if you do not have these)

Black fan mounting ties, round clips, and foam strip laid out as radiator fan hardware.
Fan mounting hardware: long ties with T-heads, round clips, and foam strip used to mount the fan.
  1. Mount the fan using fan mounting hardware. (Contact Hybrid Racing if you do not have these)

02 Fan Mounting

Black plastic fan tab pushed through radiator fins with a protective square between fan and core.
Push the fan tabs through the radiator fins with protective squares installed between the fan and core.
  1. Mount the fan in the appropriate direction and push the tabs through the radiator fins. Install the protective squares between the radiator and the fan, making sure not to damage any of the cooling fins.

03 Clip & slide

Black plastic clip seated on the aluminum radiator core next to a black hose.
After the tab is through, clip and slide the back piece so the fan stays secured tightly to the radiator.
  1. After the tab has been pushed through, clip and slide the back piece and make sure the fan is secured tightly to the radiator.

04 Placing the radiator

Aluminum K-swap radiator seated in the factory AC location on the blue chassis with OE rubber grommets.
Place the radiator with OE rubber grommets into the factory AC location; fan should already be attached.
  1. Place the radiator along with the OE rubber grommets into the factory AC location. NOTE: The fan should be attached at this point.

05 Drain Bolt Installation

Brass wing-style drain bolt installed through a hole in the lower aluminum K-swap radiator tank.
Drain bolt threaded into the radiator’s lower tank; thread sealer may be used if desired.
  1. Install the drain bolt. Thread sealer can be used if desired.

06 Fan Switch Installation

Fan switch sensor seated in the bottom bung on the K-swap radiator lower tank.
Fan switch sensor installed in the radiator’s bottom bung, ready to connect to the conversion harness.
  1. Install the Fan Switch sensor into the bottom bung. (connect to your conversion harness)

07 Temperature connect

Coolant temperature sensor connected in the bung at the top of the radiator.
Connect the coolant temperature sensor in the bung at the top of the radiator to the conversion harness.
  1. Connect the coolant temperature sensor in the bung at the top of the radiator. (connect to your conversion harness)

08 Hose connection

Black radiator hose and overflow line connected at the top tank of the aluminum radiator under the red core support.
View the radiator hoses connected at the top of the radiator before filling the system with coolant and checking for leaks.
  1. Connect the proper radiator hoses, and fill system with coolant. (radiator hoses may vary due to different applications and parts) Once filled, check for leaks.

09 Connector Location

White factory fan connector with blue and black wires resting on the red radiator support bar.
Locate the factory fan connector on the red support near where the stock OE radiator fan was.
Blue crimp connectors on black fan wires hang near the headlight in the front engine bay.
Factory fan wires with crimp-on connectors ready near where the stock OE radiator fan was located.
  1. Locate the factory fan connector located near the stock OE radiator fan was. The easiest way to connect the fan is to use the crimp on connectors, remove the stock plug and crimp on the wire connector ends.

10 Connect the wires to the new slim fan.

White electrical connector joining black fan wires near the headlight and red radiator support.
Connect the slim fan wires at the white connector beside the headlight and radiator support.
  1. Connect the wires to the new slim fan.

11 Let the car warm up, watching the coolant temperature level. When the fan kicks on, (either set by the fan switch, or…

Hybrid Racing logo in black and lime green stylized shapes above HYBRID RACING text
Hybrid Racing logo shown for the final K-swap radiator install step after warm-up checks.
  1. Let the car warm up, watching the coolant temperature level. When the fan kicks on, (either set by the fan switch, or KPRO) confirm the fan is turning the proper way. If it is not, switch the wires on the connector. If everything checks out ok you have successfully installed your K series swap radiator.

Finishing up

If you have any questions or comments, please email support at

support@hybrid-racing.com

Legal Disclaimer

Users assume all cost and risk associated with these or any other items purchased from Hybrid Racing LLC.

Parts sold or manufactured by Hybrid Racing LLC may not meet legal requirements for use on public roads. People thinking about purchasing product(s) from Hybrid Racing LLC should check with their local and state authorities for legality. It is the user’s responsibility to know and comply with all local and federal laws and regulations. Use or installation of Hybrid Racing LLC products may affect user insurance and/or vehicle warranty coverage. It is the user’s sole responsibility for consequences that may occur due to having the product installed in his/her vehicle.

Hybrid Racing LLC assumes no legal responsibilities and/or liabilities, whether to user’s vehicle, engine, person(s), and/or property(s), that result from the use of, or servicing of a vehicle of which a Hybrid Racing LLC product has been installed/attempted to be installed, or to any other vehicle(s) and/or person(s), regardless of whether or not this product has any involvement

directly or indirectly and/or liability, and/or whether or not proper installation has been carried forth.

All engines, engine parts and electrical components are for OFF ROAD USE ONLY/RACING

VEHICLES ONLY. They are not for or to be used on public roads in the USA.

Acquisition of a Hybrid Racing LLC product will act as an acknowledgement of the legal disclaimer stated herein.

Hybrid Racing LLC reserves the right to change this disclaimer at any time without any prior

consent or notification.

Should you need to contact us our details are as follows:

Hybrid Racing LLC, 12231 Industriplex Suite B, Baton Rouge, LA 70809

www.hybrid-racing.com

Revision 3 · Updated Nov 12, 2026

YOU MAY ALSO LIKE

RECENTLY VIEWED