Product images 1 / 12
Description
TiAL Sport Q 50mm Blow Off Valve - 10 PSI Spring
The TiAL Sport Q 50mm blow off valve with 10 PSI spring is the go-to BOV for turbocharged builds that need reliable, high-flow pressure relief without giving up throttle response. This is TiAL's updated Sport Q design, a direct upgrade over their original BOV, and it mounts to any standard TiAL V-band weld flange with no cutting or pipe modification required.
The 50.5mm Valve
The 50.5mm valve is the core of what makes the Sport Q stand out. It flows roughly 60% more air than the previous TiAL BOV design, which means faster pressure release between shifts, smoother boost buildup, and less compressor surge stress on your turbo. A single Sport Q supports builds up to 1,800 horsepower (220 lb/min max flow), so it's just as relevant for a 300-whp street car as it is for a full-send race build.
Construction
The valve is CNC-machined 6061 aluminum throughout, body, internals, and the banjo-style air fitting. The valve stem is hard anodized and Teflon lubricated for smooth, snag-free operation. TiAL uses a clamped Viton O-ring for the primary valve seal, which resists heat and chemical exposure far better than standard rubber, and the actuator diaphragm is high-temp silicone reinforced with Nomex fabric, so it holds up in tight, hot engine bays without cracking or degrading over time.
Clean V-Band Install
V-band mounting with stainless steel hardware keeps the install clean and the connection tight. The included 10mm hose barb banjo fitting gives the valve a short, direct signal path from your boost reference port, which sharpens response off throttle. The housing is available in five anodized finishes, Black, Blue, Red, Purple, and Silver, so it works with just about any engine bay color scheme.
Why The 10 PSI Spring
The 10 PSI spring is the most versatile option in the Sport Q lineup. It keeps the valve closed under normal boost while allowing clean, full opening during pressure relief, and it works well for street and track setups running boost in the 10-25 PSI range, which makes it the right choice for most daily-driven turbo builds. If you're running a low-pressure supercharger or a vacuum-referenced system, TiAL offers alternative spring rates (sold separately) to set the opening threshold for your exact setup.
Key Features
- TiAL Sport Q 50mm blow off valve, 10 PSI spring included
- 50.5mm valve flows 60% more air than the original TiAL BOV
- Rated to 220 lb/min max flow, supports up to 1,800 horsepower
- CNC-machined 6061 aluminum body, internals, and banjo air fitting
- Clamped Viton O-ring valve seal resists heat, pressure, and chemicals
- Hard anodized, Teflon-lubricated valve stem for smooth operation
- Nomex-reinforced high-temp silicone actuator diaphragm
- V-band mounting with stainless steel hardware
- 10mm hose barb banjo fitting for fast boost signal response
- Available in Black, Blue, Red, Purple, and Silver
- Direct bolt-on for existing Sport Q or original TiAL BOV installs
What's Included
- TiAL Sport Q blow off valve assembly (10 PSI spring pre-installed)
- TiAL V-band clamp
- V-band weld flange (fits 2.5" intercooler piping)
- TiAL banjo-style air fitting with 10mm hose barb
- Weld flange high-pressure O-ring
Fitment
Compatible with all standard 2.5-inch TiAL V-band weld flanges. Not intended for modern 1.5T or 2.0T Honda/Acura applications. For just about everything else running boost, this is a part you install once and never think about again.
If you need a high-flow BOV that mounts clean and holds up in a hot engine bay, the Sport Q with the 10 PSI spring is the versatile pick: it covers most street and track boost levels, flows enough for serious power, and bolts to any standard TiAL V-band flange. Swap to a different spring rate if your setup calls for it.
FITMENT
Universal fitment for turbocharged and supercharged vehicles. Mounts to any standard TiAL V-band weld flange (2.5" intercooler piping). Direct bolt-on replacement for existing TiAL Sport Q or original TiAL BOV installations.
Spring Rate Compatibility: The included 10 PSI spring is suited for most turbocharged builds running 10-25 PSI of boost. For vacuum-referenced or low-pressure supercharged applications, alternate spring rates are available separately from TiAL.
Note: Not intended for use with modern 1.5T or 2.0T Honda/Acura turbocharged engines.
TECHNICAL DATA
- Valve Diameter: 50.5mm (51mm nominal)
- Maximum Flow: 220 lb/min
- Operating Pressure Range: 2-12 PSI (spring-dependent)
- Spring Rate Installed: 10 PSI
- Flow @ 10 PSI Spring: 104.0 lb/min (1,562 ft³/min)
- Maximum Supported Power: 1,800 HP
- Body Material: CNC machined 6061 aluminum
- Valve Stem Finish: Hard anodized, Teflon lubricated
- Valve Seal: Clamped Viton O-ring
- Diaphragm Material: Nomex-reinforced high-temp silicone
- Mounting Style: V-band clamp
- Inlet Pipe Size: 2.5 inch (63.5mm)
- Air Fitting: Banjo style, 10mm hose barb
- Hardware: Stainless steel
- Available Colors: Black, Blue, Red, Purple, Silver (anodized)
IN THE BOX
- (1) TiAL Sport Q Blow Off Valve Assembly - 10 PSI spring pre-installed
- (1) TiAL Banjo Style Air Fitting with 10mm Hose Barb
- (1) V-band Weld Flange (2.5" / 63.5mm intercooler pipe)
- (1) TiAL V-band Clamp
- (1) Weld Flange High Pressure O-ring