1/2
PRODUCT DETAILS
Tanabe Revel VLS Oil Pressure Gauge 0-150PSI (52mm)
The Tanabe Revel VLS Oil Pressure Gauge gives you a simple, honest way to keep an eye on what your engine oil system is doing, because guessing gets expensive fast. This gauge 0-150PSI reads from 0 to 150 PSI in real time, so you can spot stuff like hot idle pressure dropping off, pressure spikes on cold starts, or a trend that says your bearings are not happy. If you want a setup you can actually read while you’re driving, this one nails the basics without trying to be flashy.
The OLED display is the big win here. It's simply easier to read than a typical LCD, especially at night or when the sun hits the dash at the worst possible angle. Tanabe calls out visibility up to about 170 degrees, and in real life that means you do not have to crane your neck to confirm you still have pressure mid pull. The OLED display also makes the numbers look clean and sharp, which matters when you only glance at it for half a second.
If you hate wiring, you will like the Daisy-Chain feature. The Tanabe VLS Oil Pressure Gauge will link with other VLS gauges like Boost, Water Temperature, Oil Temperature, and Voltage, so you can run multiple gauges with less harness clutter. Just note the one catch Tanabe spells out, it does not daisy chain with the Wideband A/F or Intercooler Dual Temp gauges.
Key Features
Accurate Monitoring: This Tanabe Engine Oil Pressure Gauge tracks 0 to 150 PSI, a solid range for street cars and most track day setups.
OLED Display: The Tanabe Oil Pressure Viewing Gauge uses OLED for strong contrast, so you can read it quickly in daylight or low light.
Wide Viewing Angles: Tanabe lists roughly 170 degree visibility, which helps when your gauge is not pointed directly at your face.
Streamlined Installation: Daisy chain support keeps installs cleaner when you run a full VLS stack.
Complete Kit: You get the 52mm gauge, power harness, oil pressure sensor and wiring, mounting pod, sunshade, and the hardware you need.
-