PRODUCT DETAILS
SpeedFactory Titanium Upper Shock Mount Nuts - Honda/Acura (Set of 8)
You just threw on a fresh set of coilovers, popped the hood to admire the work, and there they are, eight crusty steel strut nuts up top killing the whole look? Yeah, those have to go. This SpeedFactory titanium nut and washer kit is the finishing touch, and it covers all four corners. These are the nuts sitting right on top of your strut towers, so they're one of the very first things anybody sees when you open the hood, and swapping them for titanium is exactly the kind of detail that makes a clean bay look dialed.
Why You'd Bother With These
Let's be honest about what this is: it's a details part, and if you care about the details, you already get it. Those upper shock nuts live right out in the open on top of the towers, and the stock steel ones rust, stain, and look tired in a hurry, which is a shame when everything else under there is fresh. Titanium doesn't do that. It won't corrode like your steel nuts, so as long as you keep the dirt and grime knocked off them, they'll keep looking new instead of rotting into an eyesore. Sure, you're dropping a hair of weight too, but nobody's buying these for the grams, you're buying them because they finish off your setup and won't rust on you. They're a natural match for a coilover install, right when your suspension's already apart and looking good.
What SpeedFactory Puts In Your Hands
Here's what you're getting, and it's quality all the way. Like all of SpeedFactory's titanium stuff, these are made from Ti-6Al-4V, the aerospace-grade titanium, so you're getting real strength, light weight, and corrosion resistance steel just can't match. The kit's got 8 M10 x 1.25mm 6-point titanium nuts and 8 titanium washers, so you've got every corner covered with matching hardware, no mixing in old steel nuts and ruining the look you paid for.
Make Sure It Fits Your Struts
These are confirmed to fit the EF, DA, EG, DC, and EK chassis, so your CRX, Integra, Civic, and Del Sol are all covered. Better still, they'll fit any Honda or Acura setup running M10 x 1.25mm threaded shocks or struts, which is a ton of applications, so if that's your thread pitch, these will work. If you're not sure what your struts are threaded, take a quick peek or check your specs before you order, just so you know you're grabbing the right pitch.
Pick Your Finish
Grab them in raw titanium if you want a clean, understated look, or go burnt if you're after that blue and gold heat-tint titanium's famous for. Same hardware either way, so it's just how you want it showing off up top.
What You Get
- SpeedFactory titanium upper shock mount nut and washer kit
- 8 M10 x 1.25mm 6-point titanium nuts
- 8 M10 titanium washers
- Hardware for all four corners
- Made from Ti-6Al-4V (aerospace-grade titanium)
- Won't corrode like stock steel nuts and washers
- Available in raw or burnt titanium finish
Fits These Cars
- 1990-2001 Acura Integra
- 1988-2000 Honda Civic
- 1993-1997 Honda Del Sol
- 1988-1991 Honda CRX
- 1997-2001 Honda CR-V
- Any Honda/Acura with M10 x 1.25mm threaded shocks or struts
Note: SpeedFactory titanium upper shock mount nut and washer kit for Honda/Acura, a set of 8 M10 x 1.25mm 6-point titanium nuts and 8 titanium washers covering all four corners. These nuts sit on top of the strut towers and are made from Ti-6Al-4V (aerospace-grade titanium) for high strength, low weight, and superior corrosion resistance, so they won't rust like stock steel nuts and washers and stay looking new when kept clean. A great complement to a coilover install. Confirmed to fit the EF, DA, EG, DC, and EK chassis, covering the 1990-2001 Acura Integra, 1988-2000 Honda Civic, 1993-1997 Honda Del Sol, 1988-1991 Honda CRX, and 1997-2001 Honda CR-V, and will also fit any Honda or Acura application with M10 x 1.25mm threaded shocks or struts; confirm your strut thread pitch before ordering. Available in raw or burnt titanium finish. One kit per order.