PRODUCT DETAILS
Sparco Seat Mount Hardware Kits
Installing a Sparco racing seat and you need the right bolts? Sparco makes two hardware kits - one for bottom-mount seats and one for side-mount seats. The kits include metric bolts, locking nuts, and washers in the correct lengths and thread pitch for mounting Sparco seats. You're getting the hardware you need instead of going to the hardware store and guessing which bolts are right. The locking nuts prevent the bolts from backing out from vibration when you're driving. If you're mounting a Sparco seat with Sparco brackets or side mounts, these kits have the correct hardware.
Two Kits - Bottom Mount and Side Mount
Sparco makes two different hardware kits. The bottom-mount kit is for seats that bolt to the floor using bottom-mount brackets or sliders. The side-mount kit is for fixed-back racing seats that use side-mount brackets. The kits have different bolt quantities and lengths because bottom-mount and side-mount seats require different hardware. Make sure you order the correct kit for your seat mounting style. If you're not sure which one you need, check your seat and brackets to see if they mount from the bottom or from the sides.
What You Get - Bottom Mount Kit (50001ZS/N)
- 4 × M8 x 1.25 – 25mm bolts
- 4 × M8 x 1.25 – 20mm bolts
- 4 × M8 x 1.25 locking nuts
- 4 × Washers
What You Get - Side Mount Kit (50002ZS/N)
- 4 × M8 x 1.25 – 25mm bolts
- 8 × M8 x 1.25 – 20mm bolts
- 8 × M8 x 1.25 locking nuts
- 8 × Washers
Works With
- Sparco bottom-mount seats with Sparco base mounts or sliders
- Sparco fixed-back racing seats with Sparco side-mount brackets
- Most Sparco seat and bracket combinations