PRODUCT DETAILS
Seibon OEM-Style Carbon Fiber Trunk Lid - 1997-2001 Honda Prelude
Already running a carbon hood and want to match it out back, or just looking to drop some weight off the rear of your Prelude? This Seibon OEM-Style carbon fiber trunk lid is the piece. It copies your Prelude's factory trunk shape exactly and remakes it in real carbon fiber, so you keep that clean stock look, just now it's carbon, lighter, glossier, and a lot cooler than the painted steel lid. No fins, no ducts, no aftermarket drama, just your factory trunk done in carbon.
Clean Carbon, Front To Back
Here's why this one's so satisfying. Because it's OEM-Style, it holds the factory silhouette, so from a few feet away it reads stock, and up close you catch that deep carbon weave under the gloss. Pair it with a carbon hood up front and your Prelude gets a cohesive, intentional carbon look at both ends, subtle and clean, not loud. It's the OEM+ move for anyone who wants their Prelude looking factory-fresh but a clear step above.
Weight Off The Back End
There's a real functional side too. Carbon fiber weighs a good bit less than your steel trunk lid, and this is weight coming off the very back of the car. Lose it here and pull weight off the nose with a carbon hood, and you're trimming mass at both ends, which helps the car's balance and how eager it feels to change direction. Straight up, a trunk lid alone won't transform the car, but every pound off the extremes is a pound that matters, and you're getting the look right along with it.
Bolts Right On
The install is easy because it's a 100% bolt-on. It's a direct replacement for your factory trunk, made to reuse all your original hinges, handles, glass, and locks, so everything carries straight over, no cutting, no fabricating. Swap it on with the hardware that's already on your car and you're done.
Built To Last
Seibon molds these with a high carbon-to-resin ratio for a stiff, strong panel that holds its shape, and a clean, consistent weave throughout. The glossy clear coat they finish it with fights off chipping and flaking, so it holds its shine season after season instead of dulling out. Seibon's been building carbon body panels for well over a decade, and it shows in the weave and the finish. Real carbon, done right.
What You Get
- Seibon OEM-Style carbon fiber trunk lid for the 1997-2001 Honda Prelude
- Factory trunk shape reproduced in real carbon fiber for a clean, subtle look
- No fins or ducts, keeps the stock appearance
- Glossy clear-coat finish that resists chipping and flaking
- Lighter than the factory steel trunk lid for weight savings at the rear
- 100% bolt-on: reuses factory hinges, handles, glass, and locks
- High carbon-to-resin ratio for stiffness and strength
Fits These Cars
- 1997-2001 Honda Prelude (Base and Type SH)
Note: Seibon OEM-Style carbon fiber trunk lid for the 1997-2001 Honda Prelude. This trunk lid reproduces the factory shape in carbon fiber for a clean, subtle OEM-style look with no fins or ducts, built with a high carbon-to-resin ratio for stiffness and strength and finished in a glossy clear coat that resists chipping and flaking. It is lighter than the steel trunk lid for weight savings at the rear of the car, and pairs well with a carbon hood for a cohesive look and weight reduction at both ends. This is a 100% bolt-on direct replacement that reuses all factory hinges, handles, glass, and locks. Fits the 1997-2001 Honda Prelude, including Base and Type SH. One trunk lid per order.