Seibon Carbon Fiber Front Fenders for 16-21 Honda Civic

  • 2016-2021 Honda Civic compatibility

  • Retains OEM fender shape

  • Gloss clear coat pre-applied

  • Transfer original hardware and trim

$1,305.00

/
Subscription
Availability needs to be checked. See the message below. Currently out of stock Available to order In stock · available Available to order

Part # FF16HDCV-OE

Vehicle compatibility

Check compatibility with your vehicle.

Description

Seibon OEM-Style Carbon Fiber Front Fenders for 16-21 Honda Civic Coupe, Sedan, and Hatchback

Give a 10th-gen Civic a few years of highway driving and look at the front fenders. The lower edges, right behind the front tires, are usually covered in rock chips, and on a lot of cars the clear coat has started to fade or peel. It's not your fault. The front tires throw road debris at that spot constantly. Seibon's carbon fenders replace the factory panels in the same shape, so you get exposed carbon right where the paint was taking the most abuse.

These are about the look, not speed. Carbon weighs less than the factory panels, but fenders are light to begin with, and you won't feel the difference driving. What changes is how the front of the car looks, especially with a carbon hood or other carbon pieces on the car. They fit the coupe, sedan, and hatchback, and they're sold as a pair.

Factory Shape in Carbon

Seibon keeps the factory fender shape, so the body lines carry through to the hood, bumper, and doors without odd steps or gaps. That's what makes them look like they came from Honda in carbon. The gloss clear coat comes ready to install, with no paint needed. Care for it the way you would paint. Wax or ceramic coating helps protect the carbon from UV, which yellows and hazes it over time if it's left bare.

Install Notes

They swap in where the factory fenders were. Transfer your fender liners, trim, and factory hardware to the new panels. Hang each fender loosely, then adjust the gaps to the hood, bumper, and door before you tighten anything down. A second person to hold the panel while you line it up makes a big difference. Go easy on bolts that thread into carbon. Snug and even, not cranked down. Recheck the gaps once it's all tight.

Fitment

  • 2016-2021 Honda Civic Coupe, Sedan, and Hatchback
  • LX, LX-P, EX, EX-T, EX-L, Sport, Sport Touring, Touring, and Si
  • Sold as a pair (left and right)
  • Does not fit the Civic Type R. For the FK8, see Seibon's 17-21 Civic Type R fenders
FITMENT

16-21 Honda Civic Hatch/Coupe/Sedan

YOU MAY ALSO LIKE

RECENTLY VIEWED