PCI Front Strut Bar for 02-06 Acura RSX/01-05 Civic Non-Si

  • TIG Welded

  • Gloss Metallic Black Powder Coated

  • 1.25" DOM Tubing Strut Bar

  • Fits 02-06 RSX & 01-05 Civic

$299.25

/
Subscription
Availability needs to be checked. See the message below.
Delivery truck icon Ships in 2-4 Weeks
Delivery truck icon Ships in 2-4 Weeks
In stock · available
Available to order

Part # PCI-STB-RSX-F1

Vehicle compatibility

Check compatibility with your vehicle.

Description

Pro Car Innovations (PCI) Front Strut Bar - 02-06 Acura RSX (DC5) & 01-05 Honda Civic (EM2/ES1)

The front of a DC5 or EM2/ES1 chassis is a unibody shell with a MacPherson strut hanging off each shock tower, and those towers aren't tied to anything up top from the factory. When you load the front end in a corner, the strut pushes up into the tower and the sheet metal flexes just enough to take the edge off your steering input. You feel it as a front end that's a half-beat slow to respond and that doesn't stay consistent corner to corner. This PCI bar bridges the two towers with a rigid brace so that flex has nowhere to go, and the force that used to bend the chassis instead goes into working the suspension the way it's supposed to.

What that translates to from the driver's seat is sharper turn-in and a front end that feels like it's reacting to your hands instead of catching up to them. It's most obvious on a car that's already been stiffened up with coilovers or lowering springs and firmer bushings, because at that point the chassis is the softest link left in the front end. On a bone-stock car with worn OEM suspension the difference is smaller, so this is a mod that pays off most once the rest of the front end is doing its job.

Built From 1.25" DOM Tubing

The bar is made from 1.25" DOM (drawn-over-mandrel) tubing rather than standard welded tube. DOM is cold-drawn to a tighter, more uniform wall thickness, which gives it higher and more predictable strength for its weight. That matters on a strut bar because the whole point is resisting deflection, and a tube that flexes under load defeats the purpose. The brace stays rigid through the loads it's meant to control, and it's finished in a gloss metallic black powder coat that fights corrosion and looks clean stretched across the engine bay.

Where It Fits In

A strut bar reinforces the top of the front end specifically. It works alongside lower tie bars and subframe braces rather than replacing them, so if you're chasing a genuinely stiff chassis this is one piece of that, not the whole answer. On its own it's the most noticeable single bolt-on for front-end response because the upper towers are where the factory left the biggest gap.

Top Hat Compatibility

This bar is designed around PC top hats, and that's the combination it's built to bolt to cleanly. It can work with other top hats, but you'll need longer bolts and studs to make up the stack height, so plan for that if you're not running PCI's hats. Either way, the OEM threaded studs on the shock tower have to come off before the bar will sit down properly, so factor that into the install.

Preload Adjuster

The bar uses a preload adjuster so you can set the fit against your towers instead of forcing a fixed-length bar into place. No two chassis have aged identically, and the adjuster lets you snug the bar square to your specific car and take up any slack. A brace that sits loose does nothing, so dialing it in is what actually makes the reinforcement work. Mounting hardware is included.

Fitment

  • 2002-2006 Acura RSX (DC5)
  • 2001-2005 Honda Civic EX / LX / DX (EM2 / ES1)
FITMENT
2002-2006 Acura RSX
2001-2005 Honda Civic (Non-Si)
TECHNICAL DATA
This strut bar is specifically designed for PCI top hats. Longer bolts or studs will be needed for non-PCI top hats.  
OEM threaded studs must be removed on the shock tower to install this strut bar.  
ABOUT Pro Car Innovations (PCI)
Pro Car Innovations is an industry leader in racing products such as suspension parts, aerodynamic components, and seat mounts. Founded in 2002, the company initially collaborated with various race teams and aftermarket companies to develop innovative concepts for the racetrack. In 2007, PCI started offering its groundbreaking designs and parts to the public. 
PCI's products are designed and tested in-house in their southern California headquarters, ensuring that each part is a ground-up creation from the PCI team. Their commitment to excellence and passion for engineering has earned them a reputation as trusted leaders in the racing industry.  
Pro Car Innovations prides itself on being a high-quality parts company that exceeds market standards. When you choose PCI, you can trust that you're getting a brand that prioritizes quality, reliability, and customer satisfaction. 
Pro Car Innovations (PCI) WARRANTY
PCI offers a lifetime warranty that covers any defects in materials and workmanship for the life of the product. The warranty does not cover normal wear and tear, accidental damage, misuse, or any modifications made to the product. Additionally, the lifetime warranty is non-transferable and only applies to the original purchaser.

YOU MAY ALSO LIKE

RECENTLY VIEWED