Innovative Mounts Rear Motor Mount for 03-07 Accord/04-08 TSX

  • Replaces Soft Fluid-Filled Factory Rear Mount

  • Kills Wheel Hop under Hard Launches

  • 75A Durometer Tuned for Street Use

  • Fits Manual or Automatic, Lifetime Warranty

$121.30 $151.62 $151.62

/
Subscription
Availability needs to be checked. See the message below.
Delivery truck icon Ships in 3-5 Weeks
Delivery truck icon Ships in 3-5 Weeks
In stock · available
Available to order

Part # INO-10731-75A

Vehicle compatibility

Check compatibility with your vehicle.

Description

Innovative Mounts Rear Motor Mount - 2004-2008 Acura TSX / 2003-2007 Honda Accord 2.4L (75A)

On the K24 TSX and Accord, the rear mount is the one that controls how far the engine rocks back and forth. Under acceleration the whole drivetrain wants to pitch toward the rear of the car, and under braking or throttle lift it swings back the other way. Honda's factory rear mount is fluid-filled, built to swallow that motion quietly for the sake of a smooth, luxury-sedan ride. The problem is that a fluid-damped mount is soft by design, and over time the fluid weeps out and it gets softer still. All that engine movement has to stop somewhere before the power reaches the wheels, so you feel it as a lag off the line and as wheel hop when the tires grab.

This Innovative mount replaces that fluid-filled OEM piece with a solid design and a 75A urethane bushing, so the engine stays put instead of rocking on its tether. Power transfers to the ground more directly, throttle response sharpens up, and the wheel hop that the stock mount allows under hard launches largely goes away. The car feels more connected, like the engine and the chassis are finally working as one piece rather than the motor floating on soft rubber and fluid.

Why the 75A Is the Right Choice Here

The bushing is rated 75A on the Shore A hardness scale, and for a street-driven TSX or Accord that's the durometer that makes sense. It's firm enough to control the drivetrain and kill the wheel hop, but not so hard that the car becomes punishing to live with day to day. Harder mounts exist for high-power race builds, but on these K24 cars the 75A hits the balance most people actually want: a noticeably tighter, more responsive drivetrain that you can still commute in.

Expect Some Added Vibration

Be straight with yourself about the trade-off. Any time you replace a soft, fluid-filled mount with a stiffer urethane one, more of the engine's character makes it into the cabin. You'll feel and hear a bit more of the K24 at idle and low speed, and how much depends on your specific engine and power level. It isn't harsh with the 75A, but it's there, and it's the direct result of the same stiffness that's giving you the sharper response. Most people adjust to it within a few days and stop noticing.

Fitment

This is the rear mount for the 2004-2008 Acura TSX and the 2003-2007 Honda Accord with the 2.4L K-series engine, and it works with both manual and automatic transmissions. It's a single rear-position mount, not a full kit, so if you're refreshing a tired drivetrain you may want to address the other mounts as well. Verify your car matches before you install, because once the mount is bolted down it's non-returnable.

How It's Built

The mount is CAD/CAM designed and stress-analyzed so the load paths are right for this chassis, and the urethane uses Innovative's No-Tear bushing, which is shaped to resist the splitting that cheaper poly mounts develop from constant flexing. That matters on a rear mount that's absorbing the engine's torque on every launch. Innovative backs it with a lifetime warranty, so a failed bushing is covered.

Installation Notes

Replacing the rear mount means supporting the drivetrain and working in a tight spot, so plan on a jack with a block of wood or a proper transmission jack to take the weight while the old mount comes out. Torque the hardware to spec and let the drivetrain settle onto the new mount before final tightening so it isn't sitting under preload. It's a manageable job for an experienced DIYer, but if you haven't supported an engine before, having it done by a shop is the safer route.

FITMENT

2004-2008 Acura TSX
2003-2007 Honda Accord


YOU MAY ALSO LIKE

RECENTLY VIEWED