Innovative Mounts H-Series Rear Mount for Prelude/Accord

Innovative Mounts H-Series Rear Engine Bracket - 1990-1993 Accord & 1992-1996 Prelude

Running an H-series in your Prelude or Accord and feeling the engine rock around back there? Clunks on and off the throttle, wheel hop when you launch it, shifts that feel a little loose? That's your rear mount worn out. The stock one is fluid-filled, and once it ages and goes soft, there's nothing holding the back of your engine steady. This Innovative Mounts rear T-bracket fixes it. It swaps that tired fluid mount for a stiffer polyurethane setup, so your H-series stays planted, the wheel hop settles down, and the car feels sharper the moment you get on it.

Why The Rear Mount Makes A Difference

Here's what's going on down there. Your rear mount is a big part of what keeps the engine from rocking under load, and the factory piece relies on damping fluid sealed inside to stay quiet. Trouble is, that fluid leaks out over the years and the mount turns to mush, and then a torquey H-series just rocks around on it, which is what you feel as clunks, wheel hop, and vague, sloppy shifts. Ditching the fluid for solid polyurethane locks the engine back down, so your power goes into moving the car instead of wasting motion rocking the motor. Straight up, the car feels tighter and more responsive.

One honest heads-up: stiffer mounts pass a little more vibration into the cabin, and how much you feel depends on your engine and how much power it's making. That's the normal trade for the sharper response, and most people running an H-series build think it's a fair deal.

Built Right By Innovative

Innovative doesn't skimp here. The bracket uses their no-tear bushings to knock down vibration and hold up to abuse, and it's CAD/CAM designed and stress analyzed so it fits right and takes the load without flinching. The hardware's included, so you're not chasing down extra bolts, and the whole thing carries a lifetime warranty. That's real backing on a part that works hard every mile.

Make Sure It's Your Fitment

Couple of things to nail down before you order, because this one you can't undo. First, this is the H-series bracket, so it's for cars running an H-series engine (whether it came that way or you swapped one in). If your car's got an F-series engine, this isn't your bracket. Second, and this is important: once a mount has been installed, it can't be returned or exchanged, so double-check your fitment before you bolt it in. And since swapping a mount means safely supporting the engine, it's worth having a shop handle it if you're not set up for that kind of work.

What You Get

• Innovative Mounts H-series rear engine T-bracket
• Stiffer polyurethane mount that replaces the OEM fluid-filled mount
• No-tear vibration-minimizing bushings
• CAD/CAM designed and stress analyzed
• Mounting hardware included
• Backed by a lifetime warranty
• For cars running an H-series engine

Fits These Cars

• 1992-1996 Honda Prelude (BB chassis) with an H-series engine, including S, SE, Si, Si 4WS, and VTEC
• 1990-1993 Honda Accord (CB chassis) with an H-series engine, including DX, EX, LX, and SE

Note: Innovative Mounts H-series rear engine T-bracket for the 1992-1996 Honda Prelude (BB chassis) and 1990-1993 Honda Accord (CB chassis) running an H-series engine. This stiffer polyurethane mount replaces the OEM fluid-filled rear mount to reduce wheel hop and sharpen driving response; because it removes the factory damping fluid, some added vibration may be felt depending on the engine and power level. Features no-tear vibration-minimizing bushings, CAD/CAM design, stress analysis, and included hardware, and is backed by a lifetime warranty. This is the H-series version and is intended for cars with an H-series engine; F-series cars require a different bracket. Professional installation is recommended, as mount replacement requires safely supporting the engine. Confirm fitment before installation, as mounts cannot be returned or exchanged once installed. One bracket per order.