Innovative Hydro Transmission Conversion for 90-93 Integra

  • Cable to hydraulic conversion included.

  • Precision CAD/CAM design.

  • OEM hardware for easy installation.

  • Stress-analyzed for enhanced durability.

$349.91 $437.39 $437.39

/
Subscription
Availability needs to be checked. See the message below.
Delivery truck icon Ships in 3-5 Weeks
Delivery truck icon Ships in 3-5 Weeks
In stock · available
Available to order

Part # INO-49355-75A

Vehicle compatibility

Check compatibility with your vehicle.

Description

Innovative Mounts Cable-to-Hydro Conversion Mount Kit - 1990-1993 Acura Integra (75A)

The 1990-1993 Integra came from the factory with a cable-actuated transmission, and for a lot of builders that's the one thing holding the drivetrain back. The later hydro B-series transmissions, the ones found behind the 94-01 GS-R and Type R and the 99-00 Civic Si, are the ones people actually want, because they open up better gear ratios and factory limited-slip options and there are simply more of them out there in good condition. The catch is that a hydro transmission doesn't bolt into a cable chassis on its own. It mounts differently, and the clutch is actuated differently, so you need a conversion to make it work. That's what this kit is for.

Innovative's conversion kit provides the mounts that locate a hydro transmission correctly in the DA9/DB1/DB2 chassis, and it includes the cable-to-hydraulic actuator that handles the clutch side of the swap. In other words, it solves both halves of the problem in one kit: holding the new transmission where it belongs and getting the clutch to work with your setup. The mounts use a 75A urethane bushing, so once it's all together the drivetrain is held firmly and the car feels tighter and more direct than it ever did on soft factory rubber.

What This Kit Is, and Who Needs It

This is a conversion kit, not a straight mount replacement. You want it if you're putting a hydro B-series transmission into an early cable-chassis Integra and need the mounts and actuator to do it. If your car is staying with its original cable transmission, this isn't the part you're after. Being clear on that before you order saves a headache, because the whole point of the kit is enabling the transmission swap.

What It Does for the Car

Two things come out of this. First, you get access to the hydro transmission's gearing and LSD options, which is the real reason to do the conversion in the first place. Second, because the mounts are a solid 75A design rather than worn-out factory rubber, the engine and transmission stop rocking around under load. Power transfers to the ground more directly, throttle response sharpens, and the wheel hop that soft mounts allow is brought under control. The trade, as with any stiffer mount, is a bit more vibration into the cabin, which the 75A durometer keeps reasonable for a street-driven car.

How It's Built

The kit is CAD/CAM designed so the mounts locate the transmission accurately, and the components are stress-analyzed to hold up to the loads a swapped drivetrain puts on them. It's built to use OEM and stock hardware wherever possible, which keeps the installation closer to a factory-style job and cuts down on fabrication. The bushings are Innovative's No-Tear urethane, shaped to resist the splitting that cheaper poly develops over time, and the whole kit carries a lifetime warranty.

Fitment

This kit fits the 1990-1993 Acura Integra GS, LS, and RS, along with the 1992-1993 GS-R, on the DA9/DB1/DB2 chassis with a B-series engine, when converting to a hydro manual transmission. Confirm your build before ordering, and plan the conversion around the transmission you intend to run.

Installation Notes

This is a full transmission conversion, not a quick mount swap, so it's a job for someone experienced with B-series swaps or a shop that does them. You'll be supporting the drivetrain, fitting the conversion mounts, and setting up the clutch actuation, so give yourself the time and the right tools. Follow the torque specs and let the drivetrain settle onto the mounts before final tightening so nothing sits under preload.

FITMENT
1990-1993 Acura Integra

YOU MAY ALSO LIKE

RECENTLY VIEWED