Product images 1 / 3
Description
Innovative Mounts Manual Transmission Mount Kit - 2004-2008 Acura TL V6 (UA6/UA7)
Your TL's engine and transaxle sit on soft rubber mounts from the factory, and that softness is deliberate. Honda tuned them to soak up vibration so the cabin stays quiet and smooth, which is exactly what you want in a luxury sedan and exactly what works against you once the car is making more power or getting driven hard. Every time you get on the throttle, the whole drivetrain rocks on those pliable mounts before the power reaches the wheels. You feel it as a hesitation off the line, as sloppy shifts when the transaxle is physically moving around under your hand, and as wheel hop when the tires finally hook. This kit replaces the factory manual-transmission mount with a solid steel mount and a urethane bushing, so the drivetrain stays planted instead of pitching around.
The difference shows up the moment you drive it. Because the transaxle no longer rocks away from the engine under load, the power gets to the ground more directly and throttle response sharpens up. Shifts feel tighter and more mechanical because the gearbox is held in place while you move the lever, so the gates line up where you expect them instead of drifting with engine movement. On a J32 that's been opened up at all, that control is the whole point, and it's the reason people swap these mounts long before they're worn out.
Pick the Durometer for How You Drive
The bushing hardness is measured on the Shore A scale, and it's the real decision on this page. Softer bushings pass less vibration into the cabin but allow a little more movement; harder bushings lock the drivetrain down tighter and transmit more of the engine's character back to you. There's no "best" one, only the one that matches your build and your tolerance for noise and vibration:
- 60A: the softest option, for engines up to about 250 hp. This is the daily-driver choice. It firms up the drivetrain noticeably over stock while keeping the car livable on long commutes.
- 75A: a middle ground for roughly 250-400 hp. More control than the 60A with only a modest increase in vibration. This is the most popular pick for a street car that also sees spirited driving.
- 85A: firmer still, aimed at 400-500 hp builds and track use. You'll feel and hear more of the drivetrain, but movement is tightly controlled.
- 95A: the hardest bushing, built for 500+ hp. This is a race-oriented choice. Expect significant vibration and drivetrain noise at idle and low speed, which is the trade for maximum control.
Be honest with yourself about the noise. A 95A mount on a street-driven TL will buzz and drone in a way that gets old fast, and a 60A on a high-power build won't hold the drivetrain the way you need it to. Most people who daily their TL land on the 60A or 75A. Save the 85A and 95A for cars that spend real time on a track.
Manual Transmission Only
This kit is cut for the manual-transaxle TL. It will not fit the automatic cars, so if your TL is an auto this isn't the right part. It covers the 2004-2008 TL on the UA6/UA7 chassis with the J-series V6 and a manual gearbox. Confirm your car is a 6-speed before you order.
How It's Built
The mount body is solid steel in place of the factory's rubber-and-metal assembly, and the urethane bushing is Innovative's No-Tear design, which is shaped to resist the splitting that cheaper poly mounts develop over time from constant flexing. That matters on a mount that's absorbing the full torque of a V6 every time you accelerate. Innovative backs the kit with a lifetime warranty, so if a bushing ever does fail, it's covered.
Installation Notes
This is a transmission mount swap, which means supporting the drivetrain from below while you remove the old mount and fit the new one, so you'll want a jack and a block of wood or a proper transmission jack to take the weight. Torque the mount hardware to spec and let the drivetrain settle onto the new mount before you snug everything down, which keeps the mount from sitting under preload. It's a straightforward afternoon job for anyone comfortable working under the car, but if you've never supported a drivetrain before, it's worth having a second set of hands.
What You Get
- One Innovative Mounts solid-steel manual transmission mount for the 2004-2008 Acura TL (UA6/UA7)
- No-Tear urethane bushing in your chosen durometer (60A, 75A, 85A, or 95A)
- Lifetime warranty