PRODUCT DETAILS
Honda Cabin Air Filter – OEM Pollen Filter 80292-SDA-407
This is the genuine Honda OEM cabin air filter (part number 80292-SDA-407) your Honda or Acura needs behind the glove box. It's the factory-spec pollen filter that catches dust, pollen, road grit, mold spores, and fine airborne particles before they cycle through your HVAC system and into the cabin. If your A/C feels weaker than it used to, or there's a musty smell when you first kick the fan on, your cabin filter is likely the culprit.
This filter is sold and fulfilled by Hybrid Racing — a performance Honda specialist. We stock this part because Honda HVAC integrity matters whether you're running a stock daily driver or a built Accord with a custom tune. A clogged or wrong-spec cabin filter restricts airflow across the evaporator core, which puts extra load on your blower motor and reduces A/C cooling efficiency. Using the correct OEM filter — not a generic aftermarket substitute — means you get the exact filter media density, frame dimensions, and seal geometry Honda engineered for these platforms.
OEM vs. Aftermarket: Why It Matters
Generic aftermarket cabin filters are cut to approximate dimensions and use varying media grades. The Honda OEM filter 80292-SDA-407 is made to exact tolerances — correct frame width, correct pleat depth, and a factory-matched gasket seal that prevents unfiltered air from bypassing the media at the edges. For modified Hondas especially, bypassed air entering the HVAC plenum is exactly the kind of thing that accelerates evaporator core fouling. The OEM part eliminates that variable entirely.
Key Features
- Genuine Honda OEM cabin air filter / pollen filter — not a rebranded aftermarket unit
- Exact factory dimensions and pleat density for Honda and Acura applications
- Factory-matched frame and gasket seal — no air bypass around filter edges
- Filters dust, pollen, mold spores, and fine road particulates from cabin air
- Restores proper HVAC airflow and A/C cooling efficiency when replaced on schedule
- Direct-fit for all listed Honda and Acura models — no trimming or modification needed
- Recommended replacement interval: every 15,000–25,000 miles or once per year
Also Replaces / OEM Cross-Reference
This current Honda OEM part number (80292-SDA-407) directly supersedes and replaces all of the following discontinued Honda part numbers:
- 80292-SDA-406
- 80292-SDA-A01
- 80292-SDA-A02
- 80292-SDC-A01
- 80292-SEC-A01
- 80292-SHJ-A41
- 80292-SWA-A01
- 80292-T0G-A01
- 80292-TV1-E01
- 80292-TZ3-A41
- 80292-TZ5-A41
If you're sourcing this filter using an older part number from a previous invoice, service manual, or Honda parts catalog, any of the numbers above will cross to this current OEM unit.
How to Replace Your Honda Cabin Air Filter
- Open the glove box and empty it completely.
- Squeeze the side panels of the glove box inward to release the limiting stops, then lower the door past its normal open position.
- Locate the rectangular cabin filter housing behind the glove box opening and slide out the filter cover or door.
- Pull the old filter straight out — note the airflow direction arrow on the filter frame before removing.
- Insert the new 80292-SDA-407 filter with the airflow arrow pointing downward (toward the blower), reinstall the cover, and snap the glove box back into position.
The full replacement takes under 10 minutes with no tools on most Honda and Acura models. Refer to your vehicle's owner manual for model-specific glove box release instructions.
Vehicle Compatibility
- 2013–2021 Acura ILX
- 2014–2020 Acura MDX
- 2007–2018 Acura RDX
- 2005–2012 Acura RL
- 2004–2014 Acura TL
- 2015–2020 Acura TLX
- 2004–2014 Acura TSX
- 2010–2013 Acura ZDX
- 2003–2022 Honda Accord
- 2006–2015 Honda Civic (Non-Si & Si)
- 2015–2017 Honda Civic Type R (FK2)
- 2007–2016 Honda CR-V
- 2010–2015 Honda Crosstour
- 2005–2017 Honda Odyssey
- 2019–2021 Honda Passport
- 2009–2021 Honda Pilot
- 2006–2021 Honda Ridgeline
If you're ordering for a modified or performance Honda build and want to confirm fitment before purchasing, contact Hybrid Racing directly. We know these platforms.
This genuine Honda OEM cabin air filter (80292-SDA-407) fits the following vehicles. Confirm your exact trim and build date against your Honda parts catalog if you are working from a modified or pre-production model year vehicle.
| Make | Model | Year Range |
|---|---|---|
| Acura | ILX | 2013–2021 |
| Acura | MDX | 2014–2020 |
| Acura | RDX | 2007–2018 |
| Acura | RL | 2005–2012 |
| Acura | TL | 2004–2014 |
| Acura | TLX | 2015–2020 |
| Acura | TSX | 2004–2014 |
| Acura | ZDX | 2010–2013 |
| Honda | Accord | 2003–2022 |
| Honda | Civic (Non-Si & Si) | 2006–2015 |
| Honda | Civic Type R (FK2) | 2015–2017 |
| Honda | CR-V | 2007–2016 |
| Honda | Crosstour | 2010–2015 |
| Honda | Odyssey | 2005–2017 |
| Honda | Passport | 2019–2021 |
| Honda | Pilot | 2009–2021 |
| Honda | Ridgeline | 2006–2021 |
Technical Specifications
| OEM Part Number | 80292-SDA-407 |
|---|---|
| SKU | OHA-80292-SDA-407 |
| Filter Type | Cabin / Pollen Air Filter |
| OEM Status | Genuine Honda OEM — not aftermarket |
| Filter Location | Behind glove box, HVAC inlet plenum |
| Fitment Year Range | 2003–2022 (Honda); 2004–2021 (Acura) |
| Compatible Makes | Honda, Acura |
| Recommended Replacement Interval | Every 15,000–25,000 miles or once per year |
| Superseded Part Numbers | 80292-SDA-406, 80292-SDA-A01, 80292-SDA-A02, 80292-SDC-A01, 80292-SEC-A01, 80292-SHJ-A41, 80292-SWA-A01, 80292-T0G-A01, 80292-TV1-E01, 80292-TZ3-A41, 80292-TZ5-A41 |
| Quantity Included | 1 filter |
- (1) Genuine Honda OEM Cabin Air Filter — part number 80292-SDA-407