Honda K24A1/A4/A8 Torque Converter Cover 21351-PNB-000

Genuine Honda Torque Converter Cover (21351-PNB-000) - K24 CR-V & Element (FWD & AWD)

Nobody wakes up wanting a torque converter cover. You're here because yours is rusted through, bent up, or somebody left it off the last time this transmission came out, and now you want the right one back on. We get it. This little stamped plate closes off the torque converter opening where the engine bolts to the automatic trans, and its whole job is keeping road grime and debris out of a spot you really don't want getting dirty. It's cheap, it's easy to overlook, and it's a pain to go back for once the car's together, so let's get you the correct one now. This is the genuine Honda piece (21351-PNB-000) for the K24 automatic in the CR-V and Element.

Why You're Probably Here

We see these get ordered for the same handful of reasons. You had the trans out for a reseal or a torque converter swap and the old cover was too crusty or too tweaked to trust going back in. It rusted through from years of road spray and you want to close that gap back up. Or you pulled the car apart and found a previous owner or shop never bothered to reinstall it at all. Whatever put you here, replacing it now while you've got access is a whole lot easier than wishing you had once everything's bolted back together.

Get The Real One, It Just Fits

On a stamped part like this, fit is the entire game. It's got to sit flat, line up with the bolt holes, and clear the spinning parts inside without touching a thing. That's exactly where a generic or "close enough" cover ruins your afternoon, and you're stuck trimming or bending a panel that was never shaped for this trans. This is the piece Honda designed for it, so it drops on and lines up the first time. It's a couple of bucks to do right, and doing it right means you bolt it on once and never think about it again.

Fitment

This fits the K24 automatic transmission in the 2002-2006 Honda CR-V and the 2003-2011 Honda Element, covering the K24A1, K24A4, and K24A8, in both front-wheel-drive and all-wheel-drive models. If you're working on one of those automatics, front-drive or AWD, this is your cover.

Who This Is For

This is for anyone who's got the trans out or the cover off on a K24 CR-V or Element, whether that's a reseal, torque converter work, a swap, or just swapping a rusty or missing cover for the genuine part. It's a small piece, but it's worth doing right while you're already in there. Grab it, bolt it on, and finish the job clean.

Fits: Honda K24A1, K24A4, and K24A8 automatic transmissions, 2002-2006 Honda CR-V and 2003-2011 Honda Element, both FWD and AWD. Part number: 21351-PNB-000. Type: genuine Honda torque converter cover (stamped metal). Sold: individually.