Honda Fuel Pump Assembly Gasket 17574-SE0-000
Honda Fuel Pump Assembly Gasket 17574-SE0-000
Honda Fuel Pump Assembly Gasket 17574-SE0-000
Honda Fuel Pump Assembly Gasket 17574-SE0-000
Honda Fuel Pump Assembly Gasket 17574-SE0-000

Honda Fuel Pump Assembly Gasket 17574-SE0-000

  • Genuine Honda Product

  • Direct Factory Replacement Part

  • Fits Multiple Honda/Acura Chassis

  • Installs On Base of Fuel Pump Assembly

$17.99 $0.00 /
Subscription
On Backorder Only Available Available 40+ in stock Available

PRODUCT DETAILS

Honda Fuel Pump Assembly Gasket - 17574-SE0-000

Smelling gas inside your car? Got fuel stains at the bottom of your fuel pump assembly? Your fuel pump base gasket's leaking. The Honda fuel pump assembly gasket (part number 17574-SE0-000) seals the base of your fuel pump assembly where it mounts inside your fuel tank. When the gasket gets old, it hardens and leaks fuel. You'll smell it in your car or you'll see fuel seeping from the bottom of the pump assembly. Replace the gasket every time you pull your fuel pump out. Don't reuse old gaskets. They always leak.

Here's Why Your Fuel Pump Base Gasket Leaks

Your fuel pump base gasket sits at the bottom of your fuel pump assembly where it mounts to the base inside your fuel tank. It seals the pump assembly so fuel doesn't leak past the mounting surface. The gasket's made from rubber or cork, and over time it gets compressed and hard from sitting in fuel and heat. Once it hardens, it doesn't seal anymore and fuel leaks past it. If you're pulling your fuel pump to replace it or upgrade to a higher-flow pump, replace the gasket at the same time. Don't try to reuse the old gasket. Even if it looks fine, it's already compressed and it won't seal when you reinstall the pump.

Replace It Every Single Time

Any time you remove your fuel pump assembly, replace this gasket. The gasket's like five bucks and it takes ten seconds to install. If you reuse the old gasket and it leaks, you've got to drop your fuel tank all over again to fix it. That's hours of work to save five bucks. Don't do that to yourself. If you're doing a fuel pump, fuel filter, or fuel level sender replacement, order a new gasket with your parts so you've got it when you need it.

What You Get

  • Honda genuine fuel pump assembly base gasket
  • Part number: 17574-SE0-000
  • Direct OEM replacement
  • Seals base of fuel pump assembly inside fuel tank

Fits Your Car

  • 1997 Acura CL
  • 1990-1997 Acura Integra
  • 1986-1995 Acura Legend
  • 1991-1996 Acura NSX
  • 1995-1996 Acura TL
  • 1992-1994 Acura Vigor
  • 1986-1997 Honda Accord
  • 1988-1991 Honda CRX
  • 1988-1997 Honda Civic
  • 1993-1997 Honda Del Sol
  • 1995-1997 Honda Odyssey
  • 1988-1997 Honda Prelude

Note: Replace this gasket every time you remove your fuel pump assembly. Don't reuse old gaskets. They always leak. Clean the mating surface at the base of your fuel pump assembly before you install the new gasket. If there's old gasket material stuck to the base, scrape it off with a razor blade. Make sure the surface is clean and flat so your new gasket seals properly. Install the new gasket on the base of your fuel pump assembly before you reinstall it in your tank.

  • 1997 Acura CL
  • 1990-1997 Acura Integra GS/LS/RS/Special Edition/GS-R/Type R
  • 1986-1995 Acura Legend
  • 1991-1996 Acura NSX
  • 1995-1996 Acura TL
  • 1992-1994 Acura Vigor
  • 1986-1995 Honda Accord
  • 1996-1997 Honda Accord DX/LX/V6/
  • 1988-1991 Honda CRX
  • 1988-1997 Honda Civic CX/DX/EX/LX/VX/Si
  • 1993-1997 Honda Del Sol S/Si/VTEC
  • 1995-1997 Honda Odyssey
  • 1988-1996 Honda Prelude S/Si/Si VTEC
  • 1997 Honda Prelude Base/Type SH
  • (1) Fuel Pump Base Gasket

    YOU MAY ALSO LIKE

    RECENTLY VIEWED