PRODUCT DETAILS
Honda 2006–2011 Civic Sedan Taillight Gasket – 34153-SNA-A01
This Honda Civic taillight gasket (34153-SNA-A01) is a genuine Honda taillight gasket for the 2006–2011 Civic Sedan, chassis codes FA1 (Non-Si) and FA5 (Si). It sits between the taillight housing and the body and seals it, so you don’t get water sneaking in and causing condensation, electrical gremlins, or a damp trunk.
On these cars, the factory Civic gasket usually hardens, shrinks, or cracks after years of heat cycles and weather. If you’re chasing leaks, the correct fix is a proper factory gasket replacement, not RTV or foam tape. Honda sells this taillight gasket for both the inner taillight and the outer taillight gasket position, so you can replace just the side that leaks and still keep a clean OEM Civic taillight seal. Luckily, Honda used the same part numbers for both the driver and passenger sides.
Key Features
- Genuine Honda taillight gasket OEM (no universal junk)
- Correct inner or outer Civic Sedan taillight gasket options for 2006–2011 cars
- Real fix for condensation and leaks – proper Civic gasket water seal
- Restores the original Civic Sedan taillight seal and fit
- Direct bolt-on Civic 06–11 taillight gasket replacement – no trimming or guessing
Vehicle Compatibility
- 2006–2011 Honda Civic Sedan (FA1)
- 2006–2011 Honda Civic Si Sedan (FA5)
This Honda taillight housing gasket fits USDM 2006–2011 Civic Sedan taillights only. It does not fit JDM taillight conversions, so if you’re running JDM tails, this isn’t the gasket you want. Sticking with the correct OEM Civic taillight seal keeps the fitment tight, the body lines clean, and helps stop leaks from coming back.
If your trunk carpet is damp, your taillights fog up after rain, or you see water trails inside the lens, this Civic gasket condensation fix is usually the answer. Swap the failing inner or outer Civic 06–11 taillight gasket, bolt the light back in, and you’re back to factory-level sealing without the mess of silicone everywhere.