PRODUCT DETAILS
Goodridge G-Stop Stainless Brake Line Kit - 1990-1993 Acura Integra (DA)
If your DA Integra's brake pedal feels soft or spongy under hard braking, part of that is your rubber brake lines flexing, and on a car this age, those lines are decades old. As rubber brake lines heat up and age, they expand under pressure, so some of your pedal effort balloons the lines instead of clamping the brakes, and the pedal goes vague. These Goodridge braided stainless lines fix that: a PTFE inner line in a stainless steel braid that doesn't expand, so the pedal stays firm and consistent. On a DA that's tracked, built, or just driven hard, it's one of the most noticeable brake-feel upgrades you can make, and it replaces the tired factory rubber at the same time.
Why Braided Lines Firm Up The Pedal
Here's what's actually happening, and what these do and don't change.
Rubber brake lines flex and expand under the pressure of hard braking, and that expansion is what you feel as a soft, spongy pedal, part of your foot pressure is stretching the lines instead of applying the brakes. It gets worse the harder and more repeatedly you brake, and as the factory rubber ages, which on a DA it has.
The stainless braid around these Goodridge lines doesn't expand the way rubber does, so all your pedal pressure goes straight to the calipers. The result is a firmer, more responsive pedal with a consistent, linear feel that holds up under hard, repeated braking where old rubber lines go soft. To be clear about what braided lines do: they improve pedal feel and consistency, they're not a substitute for better pads, rotors, or tires if you're chasing shorter stopping distances, but for how the brakes feel and respond, the difference is immediate and genuine, a noticeably firmer, more connected pedal than the soft factory setup.
PTFE Core, Stainless Braid
The construction is what makes them firm and durable.
Each line is a PTFE inner line (which handles brake fluid and heat without degrading) inside a stainless steel overbraid that provides the firmness and protects the line from abrasion and corrosion. On a car this age, that durability matters, the braided lines won't crack and perish the way the factory rubber has, so it's a long-term fix, not another rubber line that'll age out.
Goodridge is the name in braided brake lines, developed for motorsport, and these go through a nine-point quality-assurance process, each line tested for tensile strength and pressure-rated to 3,000 psi. They meet FMVSS 106 (the federal brake-hose safety standard), are DOT compliant, and are TÜV approved, so they're properly certified, not just a cosmetic braided line.
Complete Kit, Direct Bolt-On
Everything for the install is in the box.
This is a complete set of lines covering both front and rear, with the hardware to fit them, so there's nothing else to source. The hose ends and brackets are made to match your factory design, so it's a direct bolt-on replacement for the rubber lines, using your factory calipers with no modification. It's a straightforward swap, you're replacing the lines one for one and bleeding the system, and on a car this old, fresh lines and a brake bleed make a real difference.
They're ABS-compatible, and on ABS-equipped cars they also help reduce the pedal chatter you can feel through soft rubber lines.
Fitment
1990-1993 Acura Integra (DA): GS, GS-R, LS, RS
Front and rear lines included. Direct fit, works with factory calipers.
This is for the DA Integra owner who drives the car hard or tracks it and wants a firmer, more consistent brake pedal, and to replace the decades-old factory rubber lines in one go. PTFE-core stainless braided lines that don't balloon like the old rubber, a complete front-and-rear kit with all the hardware, motorsport-grade certification, and durability that outlasts the perished factory lines. It won't shorten your stopping distances on its own, but it firms up how the pedal feels and holds up. Bolt them on, bleed the brakes, and feel the difference the first time you push the pedal.
Fits: 1990-1993 Acura Integra (DA) GS/GS-R/LS/RS. Type: braided stainless steel brake line kit, complete set (front and rear). Construction: PTFE inner line, stainless steel overbraid, 3,000 psi rated. Benefit: firmer, more consistent pedal; eliminates the sponginess from flexing rubber lines. Includes: full set of front and rear lines with hardware. Install: direct bolt-on, works with factory calipers. Certification: FMVSS 106, DOT compliant, TÜV approved.
1990-1993 Acura Integra