Eibach Rear Camber Arm Kit for 03-11 Honda Element

Eibach Rear Camber Arm Kit for 2003-2011 Honda Element - Part #5.67430K

Lower an Element and the rear camber goes negative fast, because the chassis gives you no factory rear camber adjustment to pull it back. Left alone, that means the rear tires ride on their inner shoulders and wear out from the inside where you cannot see it happening. Eibach's Pro-Alignment rear camber arms fix the root problem: replacement arms with a wide adjustment range that let an alignment shop set rear camber wherever it needs to be.

The +4.0 to -2.0 degree range is more than enough to bring a lowered Element back to factory spec, and it leaves room to dial in a performance alignment if the truck sees spirited driving. It is the right companion piece to an Eibach Pro-Kit or Sportline install on this chassis, and it works just as well behind any other lowering setup that pushed the rear alignment out of range. Whether the truck is a lowered daily, a show build, or a camping rig that just happens to sit low, the fix is the same set of arms.

Specifications

Fitment

Eibach lists this kit for the 2003-2006 and 2007-2011 Element plus the 2007-2010 Element SC. That covers the whole production run in every trim.

What to Know Before You Buy

Plan an alignment immediately after installation; camber arms are not a set-by-eye part. Eibach publishes a One-Year Warranty on this kit, which is the current coverage for its Pro-Alignment camber arm kits on this application. If the rest of the suspension is tired, bushings and shocks are worth doing at the same time while the rear end is apart.