Eibach Pro-Kit Lowering Springs for Integra Type S

Eibach Pro-Kit Lowering Springs for Acura Integra Type S - Part #E10-201-006-02-22

The DE5 Integra Type S sits noticeably higher than it needs to, and this Pro-Kit is Eibach's answer: 1.0 inch out of the front and 0.8 inch out of the rear on progressive-rate springs developed for this chassis. The drop closes the fender gap without wrecking the geometry, lowers the center of gravity, and takes some of the squat and dive out of a car that already has the chassis to use it. Eibach tested this kit on the factory dampers, adaptive damping included, so the drive modes keep working the way Acura intended.

Spring-and-damper matching matters more on an adaptive-damper car than on a passive one, and this is the low-risk way to drop a Type S. The rates step up enough to keep the body tied down at the lower height without turning the car harsh, which is exactly the balance a street-driven Type S wants.

Specifications

Fitment

Eibach catalogs this part for the 2023-2026 Integra Type S FWD; the Type S launched as a 2024 model, so in practice this covers every DE5 on the road. It does not fit the 1.5T Integra base or A-Spec, which use part E10-201-006-01-22 on a separate page.

What to Know Before You Buy

Set of four springs; all factory hardware is reused. Get an alignment after installation. At this drop the rear camber change is mild compared to the bigger kits, and Eibach does not flag a camber kit as required for this part, but if you run the car hard or want the rear dialed back to spec, the Eibach Rear Camber Kit (5.67476K) covers the DE5 and is worth adding. If you want the Type S lower still, Eibach's Sportline E20-201-006-02-22 drops 1.2 front and 1.0 rear. Five-Year Warranty through Eibach.