Eibach Front & Rear Sway Bar Kit for 00-09 S2000

Eibach Front and Rear Sway Bar Kit for 2000-2009 Honda S2000 - Part #4043.320

The S2000 is a momentum car, and bars are how you tune one. Eibach's anti-roll kit for the AP1 and AP2 pairs a 32mm tubular front bar with a 29mm tubular rear, both 2-way adjustable, so the balance is genuinely yours to set. Run both bars soft for a compliant street setup, stiffen the front to calm the rear end on corner exit, or step the rear up when the car pushes: two positions per bar gives four combinations before you touch anything else on the car.

The bars are cold-formed high-strength steel in Eibach's red powder coat and ship with bushings and mounting hardware. They work at stock height or over Eibach's Pro-Kit and Sportline springs for this chassis, and because the tubular design keeps weight down, the roll stiffness comes without the penalty a solid bar this size would carry.

Specifications

Available Options

Fitment

Eibach lists this kit for the 2000-2009 S2000 across the board, which covers AP1 and AP2 cars including the CR. The CR shipped with stiffer factory bars than a standard car, so the relative gain there is smaller, but the fitment is the same.

What to Know Before You Buy

All three configurations are on this page: the full kit, the front bar alone, and the rear bar alone. If this is your first bar change on an S2000, start with both bars in their softer settings and adjust one end at a time; the rear of this car communicates quickly when the balance moves. An S2000 on a stiff rear bar setting is lively in the wet, so set it for how the car actually gets driven. Eibach covers the bars with its current Five-Year Warranty.