DC Sports Cold Air Intake for 2006-2009 Honda S2000
DC Sports Cold Air Intake for 2006-2009 Honda S2000
DC Sports Cold Air Intake for 2006-2009 Honda S2000
DC Sports Cold Air Intake for 2006-2009 Honda S2000
DC Sports Cold Air Intake for 2006-2009 Honda S2000
DC Sports Cold Air Intake for 2006-2009 Honda S2000
DC Sports Cold Air Intake for 2006-2009 Honda S2000
DC Sports Cold Air Intake for 2006-2009 Honda S2000
DC Sports Cold Air Intake for 2006-2009 Honda S2000

DC Sports Cold Air Intake for 2006-2009 Honda S2000

  • 50 State C.A.R.B. Compliant (EO# D-370-15)

  • Increases Performance and Sound

  • Improves Throttle Response

  • Quick and Easy Installation

$199.99 $0.00 /
Subscription
On Backorder Only Available Available 40+ in stock Available

PRODUCT DETAILS

DC Sports Cold Air Intake for 06-09 Honda S2000

Breathe new life into your high-revving roadster. The DC Sports Cold Air Intake for 06-09 Honda S2000 relocates the filter deep in the fender well, feeding the F22C with dense, fresh air that stock accordion tubing simply can’t deliver. Mandrel-bent 6061-T6 aluminum piping maintains a perfectly smooth inner surface, eliminating turbulent restriction and sharpening throttle response from idle to the 8,200-rpm redline.


Why it belongs under your hood

  • Real-world gains: independent dyno tests show up to 8 hp and 6 lb-ft without tuning
  • Signature sound: hear a crisp induction growl on VTEC while cruising noise remains civilized
  • 50-state legal: CARB-approved (EO # D-370-15) so you stay inspection-proof from California to New York
  • Lifetime filtration: reusable DC Sports oiled cotton filter cleans in minutes and outflows paper elements for years
  • Built for the elements: wrinkle-black powder coat, stainless hardware, and molded silicone couplers shrug off heat, oil, and corrosion
  • Hassle-free fit: engineered specifically for the AP2 chassis—no MAF tricks, no CEL, no trimming inner fender liners

Everything you need is in the box—intake tube, filter, heat shield, couplers, T-bolt clamps, and detailed instructions—so you can spend less time in the garage and more time chasing that perfect apex.


Installation Snapshot:

Moderate DIY • 45-60 min • all clamps, couplers & brackets included • no cutting, no tuning required

2006-2009 Honda S2000
(1) Primary Intake Tube
(1) Secondary Intake Tube
(2) 3.0" Straight Coupler
(1) 10", 8mm Heater Hose
(1) 13", 10mm Vacuum Hose
(1) 3.0" Clamp
(1) 3.25" Clamp
(1) 5/8" Rubber Grommet
(1) M6 M/M Vibration Mount
(1) Fender Washer
(1) M6 Nylon Lock Nut
(1) Zip Tie
(1) 3.0" Filter Pack
(1) CARB Decal

YOU MAY ALSO LIKE

RECENTLY VIEWED