Description
Action Clutch RetroFit Chromoly Lightweight Flywheel - 10th & 11th Gen Civic Si
This is the flywheel that unlocks real clutch capacity on a Civic Si. The Action Clutch RetroFit chromoly lightweight flywheel is built for the 10th and 11th gen Si, and its headline trick is in the name: it lets you run a factory or aftermarket FK8 Civic Type R clutch on your Si. That's the key that gets you off the Si's thin factory clutch and onto the bigger, stronger Type R setup, so you've got a clear path to real power-holding capacity from the start. If you're planning to make power, this is the right foundation to build the drivetrain on.
Why The Type R Clutch Swap Matters
The factory Si clutch is the weak link the moment you start adding boost and a tune. It's a small, thin clutch that slips once the 1.5T is making more than stock torque. Instead of chasing a marginal Si clutch, this flywheel is machined to accept the FK8 Type R clutch, which is a larger, higher-capacity unit with a deep aftermarket behind it. That means you get far more holding capacity and a huge range of clutch options, factory Type R for a strong streetable setup or an aftermarket Type R-spec disc for serious power, all on your Si. You're buying into the better clutch platform, not patching the weak one.
Lightweight For Sharper Response
On top of the retrofit capability, this is a lightweight flywheel, so it drops rotating mass off the stock piece. That lets the 1.5T rev up and settle quicker, which sharpens throttle response and makes shifts feel faster and more connected. On a turbo four that's happiest when it's revving freely, the lighter flywheel is a noticeable wake-up on its own.
Built To Take Abuse
It's chromoly steel run through a heat treatment process for added durability, and tested to 18,000 RPM, so it's built for both street and race use with plenty of margin. You get low weight, strong engine response, and high thermal capacity, the combination a tuned, hard-driven Si actually needs. This is a flywheel built to last under real use, not a weight number that gives up strength to hit it.
The Honest Trade-Off: Some NVH
Worth knowing before you buy: pulling rotational mass off the flywheel can introduce some noise, vibration, and harshness compared to the heavy factory piece, usually a bit more gear rattle at idle and more sensitivity off the line. That's normal for any lightweight flywheel and it's the trade for the sharper response. Most owners decide it's well worth it. If you want dead-stock smoothness above all, a lightweight flywheel isn't the part for that.
Resurfaceable
Because it's resurfaceable, you can clean up the friction surface during a future clutch job instead of replacing the flywheel, which stretches its lifespan and saves money over the long haul. Pair it with your Type R clutch while the transmission is already out and you're set.
Fitment
- 2017-2020 Honda Civic Si (10th gen, FC)
- 2022-2026 Honda Civic Si (11th gen, FE)
Designed to run a factory or aftermarket FK8 Civic Type R clutch. Plan your clutch choice around the Type R setup when you order.
If you're building a 10th or 11th gen Si and want it to hold real power, start here. This flywheel gets you onto the far stronger Type R clutch platform, sheds weight for quicker response, and holds up to hard street and track use. Go in knowing a little added NVH comes with the territory, pair it with the Type R clutch that matches your power goal, and you've got a drivetrain that won't be the thing holding you back.
FITMENT
TECHNICAL DATA
IN THE BOX
Action Clutch WARRANTY
- The sales receipt or other evidence of the date and place of purchase.
- A description of the problem.
- Delivery of the product or the defective part, postage prepaid by buyer and carefully packed and insured, to: ACTION CLUTCH, 3912 WHITTIER BLVD, LOS ANGELES, CA 90023