Honda K20A/K20Z/K24A/K24Z Upper Starter Bolt 90027-PND-A00

Genuine Honda Upper Starter Bolt (90027-PND-A00) - K-Series & L15B Engines

It's a little thing, right up until it's the one thing standing between you and a running car. This is the genuine Honda upper starter mounting bolt, part number 90027-PND-A00, the fastener that holds the top of your starter to the block on a whole range of K-series engines. It's one of those pieces that walks off during an engine swap, gets cross-threaded and tossed, or just never makes it back into the bag. When you need it, you really need it, and you want the correct OEM bolt rather than a random hardware-store substitute that doesn't seat right.

Why The Right Bolt Matters Here

Your starter has to stay clamped down tight and square to the block. The teeth on that starter engage your flywheel every single time you turn the key, so if the mounting bolt is the wrong length, the wrong thread pitch, or the wrong grade, you're risking a starter that shifts, grinds, or works itself loose over time. This is the exact bolt Honda specced for the job, so it threads in clean, torques down properly, and holds the starter where it belongs. No guessing, no thread chasing, no hoping a close-enough bolt does the trick.

Especially Handy For K-Swaps

If you're doing a K-swap, this is a bolt you'll be glad you have on hand. Swaps involve pulling hardware off one engine and moving it to another, and small fasteners like this one are the first to disappear or get damaged in the process. Grabbing the correct genuine Honda bolt up front saves you the headache of a stalled install because you're one fastener short. It's cheap insurance for keeping your build moving.

What It Fits

This bolt covers a wide spread of K-series engines, plus the L15B, across a long list of Honda and Acura models. Check yours below:

• 2013-2015 Acura ILX
• 2002-2006 Acura RSX
• 2004-2014 Acura TSX
• 2003-2012 Honda Accord
• 2002-2015 Honda Civic Si
• 2002-2014 Honda CR-V
• 2012-2015 Honda Crosstour
• 2003-2011 Honda Element
• 2015-2020 Honda Fit

Compatible engines: K20A2, K20A3, K20Z1, K20Z3, K24A1, K24A2, K24A4, K24A8, K24Z2, K24Z4, K24Z7, and L15B1.

Who This Is For

This one's for anyone who needs to put a starter back on right, whether you're knee-deep in a K-swap, replacing a worn-out starter, or just cleaning up a build with the correct Honda hardware instead of a mismatched bolt. It's a small part that does an important job, and buying the genuine piece means you never have to think about it again. Add it to your order and get the starter mounted the way Honda intended.

Part number: 90027-PND-A00. Type: Genuine Honda upper starter mounting bolt. Fits: K20A2, K20A3, K20Z1, K20Z3, K24A1, K24A2, K24A4, K24A8, K24Z2, K24Z4, K24Z7, and L15B1 engines across the models listed above.