Golden Era Parts Front Door Weatherstripping for 88-91 CRX

Golden Era Parts Front Door Weatherstripping - 1988-1991 Honda CRX

Same question as the sub seals: where's your seatbelt? That's the one thing you need to know before you order door weatherstripping for your CRX, because Honda ran two completely different door designs across the USDM production run, and the weatherstrip is different for each one. Golden Era Parts makes both, modeled off genuine OEM parts, so whichever version fits your car you're getting the real factory profile, not a generic strip cut close and called good. Both versions come with canoe clips already installed so you've got everything you need right out of the bag.

Which One's Yours? Check The Door

If you haven't looked at the front door sub seals listing yet, here's the short version. Early USDM cars, the 1988 CRX Si, DX, and HF, plus the 1989 HF, and every worldwide 1988-1992 CRX, all run pillar-mounted seatbelts. Those use the 88/worldwide door weatherstrip. Starting with the 1989 USDM CRX (excluding the HF) through 1991, Honda moved the seatbelt into the door itself, and the weatherstrip changed to match. Go look at your door right now. Belt comes out of the pillar? You're in the 88/worldwide camp. Belt comes out of the door? You want the 89-91 USDM version. Getting this wrong means a weatherstrip that won't seal right, and returning one is a pain, so check before you buy.

88/Worldwide Version: Pillar-Mounted Seatbelt

This is the one for the 1988 USDM CRX Si, DX, and HF, the 1989 HF, and all worldwide 1988-1992 CRX. It replicates Honda PN 72310-SH2-003 on the right door and 72350-SH2-003 on the left, plus the canoe clips, PN 90664-671-003. You're getting both left and right sides, with the clips already on there, so installation is one less step than you'd expect.

89-91 USDM Version: Seatbelt In The Door

This one's for the 1989-1991 USDM CRX, excluding the HF. Because your seatbelt lives in the door, this weatherstrip is shaped differently to work around it. It replicates Honda PN 72310-SH2-A21 on the right and 72350-SH2-A21 on the left, plus the same canoe clips, PN 90664-671-003. Same deal as the other version, both sides and clips are included.

Built From The Real Thing

Golden Era Parts modeled both versions off genuine OEM parts, so the profile, the fit, and the feel are as close to factory as you're going to get on a seal Honda stopped making decades ago. These aren't just shaped close enough, they're built to the same spec the doors were designed around. Canoe clips come pre-installed on both, so once the old weatherstrip is off, it's a clean swap.

Watch The Install

This is a straightforward job but watching it done first makes it a lot easier. Here's a full walkthrough so you know exactly what you're working with before the parts show up.

What You Get

• Golden Era Parts front door weatherstripping for the Honda CRX, left and right included
• Modeled and built to exact OEM standards using genuine Honda parts as reference
• Canoe clips pre-installed (replicates PN 90664-671-003)
• 88/worldwide version replicates PN 72310-SH2-003 (R) and 72350-SH2-003 (L), for pillar-mounted seatbelts
• 89-91 USDM version replicates PN 72310-SH2-A21 (R) and 72350-SH2-A21 (L), for door-mounted seatbelts

Fits These Cars

• 1988 USDM Honda CRX Si, DX, and HF (pillar-mounted seatbelt)
• 1989 USDM Honda CRX HF (pillar-mounted seatbelt)
• 1988-1992 worldwide 2nd generation CRX (pillar-mounted seatbelt)
• 1989-1991 USDM Honda CRX, excluding HF (door-mounted seatbelt)

Note: Golden Era Parts front door weatherstripping for the Honda CRX, modeled and built to exact OEM standards using genuine Honda parts as reference. Includes both left and right sides with canoe clips pre-installed. Two versions are offered based on seatbelt location. The 88/worldwide version fits the 1988 USDM CRX Si, DX, and HF, the 1989 USDM CRX HF, and all 1988-1992 worldwide CRX with pillar-mounted seatbelts, replicating Honda PN 72310-SH2-003, 72350-SH2-003, and clip PN 90664-671-003. The 89-91 USDM version fits the 1989-1991 USDM CRX (excluding HF) with seatbelts mounted in the door, replicating Honda PN 72310-SH2-A21, 72350-SH2-A21, and clip PN 90664-671-003. These two versions are not interchangeable, confirm your seatbelt location before ordering. One set, left and right, per order.