PRODUCT DETAILS
The Brembo 08.B568.11, SKU BRB-08B56811, is a rear axle brake rotor for the 2005 through 2010 Honda Odyssey. If you are doing an Odyssey brake rotor replacement and you want it to bolt on like stock, this is the point. The rotor is the friction surface your rear caliper clamps to make torque, and this stays true to factory sizing and geometry, so you keep the stock caliper position, pad shape, and wheel fitment. Think of it as a clean OE equivalent Odyssey rotor, not a brake upgrade that changes the system.
This is a Honda Odyssey solid rotor, and Brembo adds their UV paint coating on the outer edges and the hat to slow down the usual rust creep you see on uncoated replacements. Brembo also notes their UV coating process is water based and avoids the chemical solvents some older coating methods use.
Use it when you want premium Brembo Odyssey brakes feel in the sense of consistent, OEM style parts and published service limits, without touching bias, diameter, or thickness. It is not a big brake kit, and it will not change pedal ratio, caliper leverage, or rear brake sizing. If you are chasing a Brembo Odyssey rotor upgrade for repeated mountain descents or track days, you need more than a stock size rear rotor, but for a daily that hauls people and cargo, this is exactly the kind of part we run when we want dependable stock behavior.
- Brand: Brembo
- Series or line: Prime Line
- Placement: Rear axle, Brembo rear rotor Odyssey fitment
- Rotor type: Solid, Brembo rotor Honda Odyssey application
- Coating: UV painted corrosion protection on outer edges and disc hub area
- Diameter: 313 mm, Brembo 2010 Odyssey rotor spec
- Nominal thickness: 11 mm
- Minimum thickness: 9 mm
- Overall height: 64 mm
- Center bore: 70 mm
- Lug holes: 5
- Units per box: 2
- Vehicle application: Honda Odyssey model years 2005, 2006, 2007, 2008, 2009, 2010, covers 2005 Odyssey Brembo rotor needs, Odyssey 2006 Brembo rotor installs, 2007 Odyssey rear brakes service, Honda Odyssey 2008 rotor replacement, and 2009 Odyssey Brembo brakes maintenance
- Part numbers: MFG 08.B568.11, SKU BRB-08B56811, listed as Honda Odyssey Brembo rotors
Installation and service considerations: This is a direct replacement style rotor, so you should not need vehicle mods. Clean the hub face until it is actually clean, or you will get rotor runout and the steering wheel shimmy you will swear is a balance issue. Measure thickness and do not run it past the 9 mm minimum. While you are in there, make sure the slides move freely and the hardware is not seized, because sticky rear calipers can cook even a fresh Odyssey rear axle rotor in a hurry.