PRODUCT DETAILS
Whiteline Rear Sway Bar 24 mm two position adjustable for Acura RSX 2002 to 2006
If you want real RSX handling improvements, a rear bar is one of the first places to look. This rear anti-sway bar Whiteline unit ties the left and right rear suspension together through the factory chassis mounts, then fights body roll by resisting one side compressing while the other droops. More rear roll stiffness changes how the rear tires share load in a corner, which directly changes balance.
On the DC5, the stock rear bar is usually the bottleneck once you add stickier tires, stiffer springs, or more aggressive alignment. This Whiteline 24mm sway bar steps up diameter and rate, so your car takes a set faster and feels less lazy in transitions. The trade off is simple, more rear bar can make the car rotate easier. That’s great if you want turn in, not great if you drive in the rain like it’s still July.
The Whiteline BHR67Z sway bar gives you two end link positions per side. You pick inner or outer hole to change the lever arm length, which changes effective stiffness at the wheel. That means you can tune the rear sway bar Acura RSX setup without buying another bar. Go softer for daily duty and rough roads, go stiffer for autocross, track days, or if your current setup pushes like a shopping cart.
- Manufacturer part number
BHR67Z - Vehicle position Rear
- Bar diameter 24 mm
- Adjustment Two position adjustable
- Bar type Solid steel sway bar
- Included components Sway bar, two mounting bushings, installation grease, installation guide
- Warranty Three years
- Typical install time About one hour
- Fitment Acura RSX 2002 to 2006
Selection considerations
This is the play when a fixed rate bar can’t keep up with your setup, or when you know you’ll change tires, spring rates, or alignment later. If you’re shopping a 24mm sway bar for Acura RSX builds, this one gives you actual tuning range. It works as a sway bar for 2002 Acura RSX, a sway bar for 2005 Acura RSX, and it also covers the common 2006 RSX rear sway bar upgrade path, all under the same Whiteline Acura RSX parts umbrella.
Installation scope and limitations
Install swaps your Acura RSX rear suspension bar at the chassis mounts and reuses the end link style you already run. Set final torque with the car at ride height where applicable, and make sure the end links don’t bind. Start on the softer hole if you’re unsure, then step up. We run this exact Whiteline anti-sway bar RSX setup on our own cars because it lets you dial balance instead of guessing.
SKU WYT-BHR67Z