Brembo UV Coated Front Rotor for 03-17 Accord/06-15 Civic

Brembo Front Premium UV Coated Brake Rotor for 2003–2017 Honda Accord and 2006–2015 Honda Civic

This Brembo front rotor 282mm is a direct, OE-equivalent Accord Brembo brake rotor and Civic Brembo brake rotor that drops right in and brings your braking back to how the car should feel from the factory. It fits a wide range of Honda and Acura applications, including Accord, Civic, CR‑V, and ILX, and keeps pedal feel and ABS behavior exactly where Honda intended.

Your front rotors do most of the work and eat most of the heat. Once they’re worn, glazed, or uneven, you’ll feel it as vibration, longer stops, and a soft or inconsistent pedal. This Brembo vented brake rotor fixes that by restoring proper heat control and balance while keeping OEM manners, just with better corrosion resistance than the stock stuff.

Why Brembo

Brembo supplies brakes to a ton of OEMs and has been doing it forever, from normal commuter cars to serious performance models. Their OE Premium line, including this Honda Accord brake rotor Brembo and Honda Civic brake rotor Brembo, follows the same strict metallurgy specs, tight machining tolerances, and quality checks they’re known for. You get a rotor that fits, runs true, and stays consistent in daily use—we run these on our own street cars.

Why this rotor is a smart replacement

• OE-equivalent geometry: This Brembo Accord front rotor and Brembo Civic front rotor match factory dimensions, so your brake bias, ABS calibration, and pedal feel all stay correct.
• Vented construction: The internal vanes move air through the rotor to shed heat faster, which helps cut down fade during repeated highway stops, spirited backroad drives, or fully loaded road trips.
• Grey cast iron: The material handles temperature swings without freaking out—good crack resistance and stable friction under normal and “I’m a little late” type driving.
• UV-coated corrosion protection: The Brembo UV coated rotor finish on the hat and non-friction surfaces fights rust and keeps the rotor looking clean behind the wheel, unlike bare stock rotors that turn orange in a week.

Key features

• Premium OE-equivalent Brembo replacement rotor Accord / Brembo replacement rotor Civic
• Vented design for more consistent cooling under repeated stops
• Grey cast iron for stable, predictable braking
• UV-coated for rust and corrosion resistance on exposed surfaces
• Precision-machined braking faces for smooth engagement and minimal runout
• Includes fixing screws to make install and rotor changes less of a fight

Specifications

• Rotor type: Vented front rotor
• Outside diameter: 282 mm (Brembo front rotor 282mm)
• Number of bolt holes: 5 (Brembo 5-hole rotor)
• Material: Grey cast iron
• Weight: 14.47 lbs

Fitment notes

• Direct-fit Accord Brembo brake rotor for 2003–2017 Honda Accord (front)
• Direct-fit Brembo Civic front rotor / Civic Brembo brake rotor for 2006–2015 Honda Civic (front)
• Also fits select Brembo CR-V front rotor and Brembo ILX front rotor applications—verify by part number
• Works as an Acura ILX rotor Brembo replacement where specified

If your fronts are pulsing, lip-worn, or just tired, this Brembo UV coated rotor is a solid, no-drama upgrade over standard replacement parts. You keep stock feel and fitment, gain better corrosion resistance, and know the car will stop how it should every time.