PRODUCT DETAILS
Hasport Performance H22 Left Hand Engine Mount for 1994 to 1997 Honda Accord is the driver side mount you run when you’re putting an H22A or H23 into a 94 Accord, 95 Accord, 96 Accord, or 97 Accord. In a swap, this left hand mount holds the powertrain on the driver side and keeps it from rocking around when you get on throttle, grab gears, or jump on the brakes, while keeping the engine sitting where the rest of the Accord 94-97 engine mount system locates it.
You need this Accord H22 engine mount because the stock Accord mounting layout does not line up with H22A or H23 block and accessory geometry. Hasport sells it as a single piece from their H series system, so you can replace just the left hand mount, or finish a mixed setup where you already have other mounts and still need the correct H22 engine mount Accord position.
Hasport gives you multiple bushing options, and the trade off is simple. More stiffness means better drivetrain control and less sloppy movement, but you will feel more vibration and hear more noise in the cabin compared to soft factory rubber. If you want zero compliance, they also offer a solid aluminum bushing option. We use these exact mounts on our own swap cars, so we’re not going to pretend the stiffer stuff feels stock, it doesn’t.
- Vehicle fitment 1994 to 1997 Honda Accord
- Engine fitment 1994 to 1997 H22A and H23 engines
- Fitment note Other H series and F series dual overhead cam engines may require a different block bracket
- Position Hasport left hand mount
- Approximate shipping weight 4 lb
- Approximate package dimensions 6 in by 6 in by 6 in
Bushing stiffness options by SKU
- SKU: HAS-CDHLH-62A Bushing Stiffness: 62A (Street)
- SKU: HAS-CDHLH-70A Bushing Stiffness: 70A (Race)
- SKU: HAS-CDHLH-88A Bushing Stiffness: 88A (Extreme Race)
- SKU: HAS-CDHLH-94A Bushing Stiffness: 94A (Most Extreme Race)
- SKU: HAS-CDHLH-6061 Bushing Stiffness: 6061 (Solid Billet Aluminum)
Selection and installation considerations
Pick this Hasport Accord engine mount when your swap needs the correct driver side mount for an H22A or H23 in the 94 to 97 Accord chassis, either as a replacement mount or as part of your H22 engine mount kit or H22A engine mount kit build. Double check your engine family and block bracket before you order, because other H series and F series DOHC variants may not use the same bracket. Also be real with yourself about stiffness, a 62A street mount is livable for most people, but if you step up to 88A or 94A, your car will feel more like a track car at idle and cruise. That is the deal with any Hasport engine mount kit or single Hasport performance mount when you chase maximum control.