Honda Sand Dune Pearl Touch Up Paint YR662P

Honda OEM Sand Dune Pearl Touch-Up Paint - YR662P (0.25 fl oz)

You've got a rock chip on your Civic Hatchback Sport Touring or Hybrid and it's staring right at you every time you look at the paint. Honda OEM touch-up paint, color code YR662P. This is the factory-spec Sand Dune Pearl that Honda sprayed on your car. Same color. Same pearl finish. Not some off-the-shelf beige from an auto parts store that's going to look nothing like your paint. The kit comes with everything you need to fix it yourself. An abrasive prep tip to clean the chip down to bare metal. A color applicator pen to lay down the paint. A clear coat applicator to seal it and protect it. No mixing required. No waiting around for hardeners. Just clean it, paint it, clear it, and you're good. Takes fifteen minutes tops.

Sand Dune Pearl Is Tricky - You Need Factory Paint

Sand Dune Pearl isn't a straight beige. It's got a warm tan undertone with a pearl effect that makes it shift in different lighting. Try to match it with generic touch-up paint and you're going to have a nightmare. The color will be either too yellow or too gray depending on the light. The finish won't have the pearl. You're going to end up with a chip repair that looks worse than the original chip because now it's obviously been worked on. The OEM Honda paint has the exact same undertone and the exact same pearl effect. When you apply it right the repair disappears into the panel. You're the only one who's going to know it was ever there.

Everything Pre-Mixed And Ready To Go

Open the bottle and you're ready to work. The prep tip on the cap scrubs away loose paint and oxidation inside the chip. You're cleaning down to good surface so the new paint has something to grip. Then you grab the color applicator and start dabbing paint into the chip. Light coats. Multiple applications. You're not trying to fill it in one shot because that's how you end up with paint bulging out of the chip looking like a blob. Let each coat flash off for a minute then apply another. Build it up slowly until the paint surface is flush with the surrounding clear coat. Once that's done hit it with the clear coat applicator. The clear seals the color underneath and adds gloss so it matches the shine of the rest of the panel. No mixing. No waiting for anything to set before you use it.

Quarter Ounce Goes Further Than You'd Think

You're getting 0.25 fluid ounces. On a car you're keeping you might only have a couple rock chips. This one bottle handles several chips or a few small scratches scattered around. You're using tiny amounts of paint per chip so the bottle lasts. When you're finished cap it tight and throw it in the garage. First time you get another chip you've already got the paint ready to go. No need to order again. Just grab the bottle and touch it up. Most people don't go through a whole bottle for years if they're just doing occasional chip repairs.

What You Get

• Honda OEM Sand Dune Pearl touch-up paint (color code YR662P)
• 0.25 fl oz bottle
• Built-in abrasive prep tip
• Precision color applicator pen
• Clear coat applicator pen
• Lacquer-based formula (no mixing)
• Factory-exact Sand Dune Pearl with pearl finish

Fits These Cars

• 2025-2026 Honda Civic Hatchback Sport Touring (Sand Dune Pearl)
• 2025-2026 Honda Civic Hatchback Hybrid (Sand Dune Pearl)

Note: Touch-up paint specifically for Honda color code YR662P Sand Dune Pearl (also listed as Desert Beige Pearl in Honda documentation - same color). Not compatible with other beige or tan colors. Verify your paint code before ordering. Work in a clean area away from direct sunlight. Wash the chip area thoroughly and let it dry completely. Use the abrasive prep tip to scrub inside the chip and remove loose paint and surface rust. Wipe clean. Shake bottle well before opening. Apply thin coats of color paint with the applicator pen - build up multiple light layers until flush with surrounding surface, not one heavy coat. Allow each coat to dry one or two minutes between applications. Once color is level with the panel, apply clear coat over top. Clear coat protects the color and adds gloss to blend with factory finish. Allow 24 hours cure time before washing or waxing. Repair will be invisible from normal viewing distance. 0.25 fl oz handles multiple small chips. Store bottle capped tightly between uses.