Konig Dekagram 15" 4x100 Wheels

Konig Dekagram 15" 4x100 Wheels

Turn every apex into a highlight reel with Konig Dekagram 15" 4x100 wheels, the flow-formed lightweight legends trusted by grassroots autocrossers and pro racers alike. By spinning and forging the barrel under extreme pressure, Konig sheds up to 25% of unsprung mass versus a conventional cast wheel, so your Integra, Civic, or Fit feels sharper under braking, quicker to change direction, and far more eager to rocket out of corners.

Track-bred ten-spoke engineering

• Serious strength, featherweight feel – a 15 x 7.5 tips the scales at roughly 12–13 lb, yet boasts the elongation and shock resistance you’d expect from wheels that cost twice as much.
• Generous caliper clearance – fits popular big-brake kits while the open spokes keep rotor temps in check during hot laps.
• Street-smart offsets (ET35–38) and widths from 7.5" to a meaty 9" let you dial in the perfect stance without rubbing or fender rolling on most 4x100 Honda/Acura platforms.
• Two finishes, two personalities – stealthy Semi-Matte Black or head-turning Gloss Bronze, both powder-coated to fight road salt, track rubber, and daily-driver grime.

Built for icons, ready for anything

Whether you’re freshening a classic EF hatch, shaving seconds off your B-series EG, or giving your GK5 Fit the grip it deserves, the Dekagram’s 73 mm hub bore and 4x100 bolt pattern slide on with zero drama. Pair them with 195–245 section tires depending on width, hit the alignment rack, and enjoy chassis response you can feel through your fingertips.

Why enthusiasts choose Dekagram over heavier alloys

• Faster acceleration and shorter stopping distances thanks to reduced rotational inertia
• Smoother ride quality – the wheel absorbs impacts instead of passing them to the suspension
• Lower fuel consumption on the commute, quicker lap times at the track
• Backed by Konig’s limited lifetime structural warranty and 1-year finish warranty

Choose your perfect spec

• 15 x 7.5 | ET35 | Bronze (KON-DK75100358) or Matte Black (KON-DK75100355)
• 15 x 8.0 | ET25 | Bronze (KON-DK85100258) or Matte Black (KON-DK85100255)
• 15 x 9.0 | ET35 | Bronze (KON-DK95100358) or Matte Black (KON-DK95100355)

Installation Snapshot

DIY friendly (basic hand tools), 30 min per wheel, reuse OEM or aftermarket conical-seat lug nuts (not included), no tuning or cutting required.