{"title":"InlinePro","description":null,"products":[{"product_id":"inline-pro-super-alloy-head-studs-l15b7-l15be-l15ca","title":"InlinePro Super Alloy Head Studs for 16-27 Civic\/Integra 1.5T","description":"\u003cul\u003e\n\u003cli\u003eHolds the Head Sealed Under Boost \u003c\/li\u003e\n\u003cli\u003eSuper Alloy, 230 kpsi Tensile Strength \u003c\/li\u003e\n\u003cli\u003eResists Hydrogen Embrittlement, Unlike L19\/H11 \u003c\/li\u003e\n\u003cli\u003eFull 1.5\" Thread Engagement into Block \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- split --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli\u003e\u003ca class=\"active\" href=\"#Description\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\n \u003cli\u003e\u003ca href=\"#VehicleFitment\"\u003eVehicle Fitment\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\n\n\u003cli class=\"active\" id=\"Description\"\u003e\n\u003ch3\u003eInlinePro Super Alloy Head Studs - Honda L15B7 1.5T (16-27 Civic \u0026amp; Integra)\u003c\/h3\u003e\n\n\u003cp\u003eOnce you start adding boost to a 1.5 turbo, the factory head bolts become the thing standing between you and a blown head gasket. These InlinePro Super Alloy head studs replace them with something built to hold. They're made from a high-grade super alloy that's heat treated and tested to a minimum tensile strength of 230 kpsi, so they clamp the head down hard enough to keep it sealed when cylinder pressure climbs well past what the factory ever planned for. If you're building or boosting an L15, these are the foundation that keeps the top end together.\u003c\/p\u003e\n\n\u003ch4\u003eWhat Head Studs Do and Why You Need Them\u003c\/h4\u003e\n\n\u003cp\u003eThe head studs clamp your cylinder head to the block and squeeze the head gasket to seal combustion, coolant, and oil. Every power stroke, cylinder pressure is trying to lift the head off the block, and the studs are what hold it down against that force. The factory uses torque-to-yield bolts sized for stock boost, and they're fine at stock power, but as you turn the boost up the cylinder pressure rises with it, and at some point those bolts can't keep the clamping load. When that happens the head lifts just enough for the gasket to lose its seal, and you get the classic failure: coolant or oil in a cylinder, boost leaking between cylinders, and an overheating engine. Studs apply far more clamping force, and they apply it more evenly and consistently, which is exactly what keeps the gasket sealed under boost.\u003c\/p\u003e\n\n\u003ch4\u003eThe InlinePro Difference\u003c\/h4\u003e\n\n\u003cp\u003eA few things set these apart from other studs on the market. The big one is the material. A lot of high-strength studs use L19 or H11, which are strong but prone to hydrogen embrittlement, a failure mode where the metal can crack unexpectedly, and they have to be handled carefully to avoid it. InlinePro's super alloy isn't susceptible to that, so you get the strength without the fragility, and you can handle and install them without worrying about it. On top of that, these use a true-beam design that keeps full diameter down the entire length of the stud rather than being necked-down or undercut like a lot of competitors, which InlinePro builds for better, more consistent clamping force and torque values. And they thread a full 1.5 inches into the block, where a lot of other brands barely engage an inch. That deeper engagement matters a great deal in an aluminum block, because more threads holding the stud means a stronger, more secure anchor under high clamp load.\u003c\/p\u003e\n\n\u003ch4\u003eWhat's in the Kit\u003c\/h4\u003e\n\n\u003cul\u003e\n    \u003cli\u003eHead studs\u003c\/li\u003e\n    \u003cli\u003eNuts\u003c\/li\u003e\n    \u003cli\u003eWashers\u003c\/li\u003e\n    \u003cli\u003eAssembly lube\u003c\/li\u003e\n    \u003cli\u003eInstructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eInstall and Honest Notes\u003c\/h4\u003e\n\n\u003cp\u003eBe clear about what these are for. On a stock, unmodified 1.5 turbo you don't need them, but the moment you're adding real boost or building the engine for more power, they're the insurance that keeps the head sealed, and they're cheap next to the cost of fixing a lifted head gasket. Installing them means the head has to come off, so the natural time to do this is during a head gasket job or an engine build. Thread the studs into the block hand-tight, then torque the nuts to spec using the included lube and the proper sequence. One of the quiet benefits of studs over bolts is that you're not repeatedly torquing a fastener directly into the aluminum block threads, so you're easier on the block and you get a more accurate, repeatable clamp.\u003c\/p\u003e\n\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\n\u003cp\u003eFits the Honda L15 1.5 turbo engines (L15B7, L15BA, L15BE, L15CA):\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003e2016+ Honda Civic 1.5 Turbo\u003c\/li\u003e\n    \u003cli\u003e2017+ Honda CR-V 1.5 Turbo\u003c\/li\u003e\n    \u003cli\u003e2018+ Honda Accord 1.5 Turbo\u003c\/li\u003e\n    \u003cli\u003e2023+ Acura Integra 1.5 Turbo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n \n\u003cli id=\"VehicleFitment\"\u003e\n \u003cp\u003e2023-2027 Acura Integra Base\/ASpec\u003cbr\u003e2018-2022 Honda Accord 1.5T\u003cbr\u003e2016-2021 Honda Civic 1.5T\u003cbr\u003e2017-2020 Honda Civic Si\u003cbr\u003e2022-2027 Honda Civic EX\/Sport\/Si\u003cbr\u003e2017-2021 Honda CR-V\u003c\/p\u003e \n\u003c\/li\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\u003c\/ul\u003e\n","brand":"InlinePro","offers":[{"title":"Default Title","offer_id":69843256672290,"sku":"ILP-HSSA-L15B7","price":329.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2218\/5701\/files\/ILP-HSSA-L15B7_ltjq.jpg?v=1794709239"},{"product_id":"inline-pro-head-studs-k20c1-k20c4-k20c-type-r-type-s","title":"InlinePro Head Studs for the Civic Type R\/Integra Type S","description":"\u003cul\u003e\n\u003cli\u003eHolds the Head Sealed Under Boost \u003c\/li\u003e\n\u003cli\u003eTwo Options: Alloy or Super Alloy \u003c\/li\u003e\n\u003cli\u003eUp to 260 kpsi Tensile Strength \u003c\/li\u003e\n\u003cli\u003eFits the K20C1, C4, C6, and C8 Engines \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- split --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli\u003e\u003ca class=\"active\" href=\"#Description\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\n \u003cli\u003e\u003ca href=\"#VehicleFitment\"\u003eVehicle Fitment\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\n\n\u003cli class=\"active\" id=\"Description\"\u003e\n\u003ch3\u003eInlinePro Head Studs - K20C1\/C4\/C6\/C8 2.0T (Civic Type R, Integra Type S \u0026amp; More)\u003c\/h3\u003e\n\n\u003cp\u003eThe K20C is turbocharged from the factory, and the moment you start building boost and power beyond stock, the factory head bolts become the weak point that lets go. These InlinePro M11 head studs replace them with the clamping force to keep the head sealed under serious cylinder pressure. They're offered in two materials, a Premium American Alloy and a higher-strength Super Alloy, so you can match the studs to how far you're taking the build. Both are heat treated and tested, and both are the foundation that holds the top end of a boosted K20C together.\u003c\/p\u003e\n\n\u003ch4\u003eWhat Head Studs Do and Why You Need Them\u003c\/h4\u003e\n\n\u003cp\u003eThe head studs clamp your cylinder head to the block and squeeze the head gasket to seal combustion, coolant, and oil. Every power stroke, cylinder pressure is trying to lift the head off the block, and the studs are what hold it down against that force. The factory uses torque-to-yield bolts sized for stock boost, and they do the job at stock power, but as you turn the boost up the cylinder pressure rises right along with it, and at some point those bolts can't hold the clamp anymore. When that happens the head lifts just enough for the gasket to lose its seal, and you get the classic failure: coolant or oil in a cylinder, boost leaking between cylinders, and an overheating engine. Studs apply far more clamping force, and they apply it more evenly and consistently, which is what keeps the gasket sealed when you're making real power.\u003c\/p\u003e\n\n\u003ch4\u003eChoose Your Material: Alloy or Super Alloy\u003c\/h4\u003e\n\n\u003cp\u003eBoth versions share the same M11 design, the same true-beam construction, and the same resistance to hydrogen embrittlement. The difference is how much clamping headroom you want:\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAlloy (Extreme Duty), 230 kpsi minimum tensile:\u003c\/strong\u003e made from the highest-grade premium American alloy. This is the right choice for the large majority of boosted and built K20C setups, with plenty of strength for strong street and moderate power builds.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSuper Alloy (Xtreme Power), 260 kpsi minimum tensile:\u003c\/strong\u003e made from InlinePro's highest-grade super alloy for maximum clamping headroom. This is the one to step up to when you're chasing the highest cylinder pressures and biggest power, where you want every bit of clamp you can get.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eThe InlinePro Difference\u003c\/h4\u003e\n\n\u003cp\u003eBoth materials are built to avoid the compromises other high-strength studs make. A lot of studs on the market use L19 or H11, which are strong but prone to hydrogen embrittlement, a failure mode where the metal can crack unexpectedly, and they have to be handled carefully to avoid it. InlinePro's alloys aren't susceptible to that, so you get the strength without the fragility, and you can handle and install them without worrying about it. On top of that, these use a true-beam design that holds full diameter down the entire length of the stud rather than being necked-down or undercut like a lot of competitors, which InlinePro builds for better, more consistent clamping force and torque values.\u003c\/p\u003e\n\n\u003ch4\u003eWhat's in the Kit\u003c\/h4\u003e\n\n\u003cul\u003e\n    \u003cli\u003eHead studs\u003c\/li\u003e\n    \u003cli\u003eNuts\u003c\/li\u003e\n    \u003cli\u003eWashers\u003c\/li\u003e\n    \u003cli\u003eAssembly lube\u003c\/li\u003e\n    \u003cli\u003eInstructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eInstall and Honest Notes\u003c\/h4\u003e\n\n\u003cp\u003eKnow what these are for. On a stock K20C you don't need them, but once you're adding real boost or building the engine for more power, they're the insurance that keeps the head sealed, and they're cheap next to the cost of fixing a lifted head gasket. Installing them means the head has to come off, so the natural time to do this is during a head gasket job or an engine build. Thread the studs into the block hand-tight, then torque the nuts to spec using the included lube and the correct sequence. One quiet benefit of studs over bolts is that you're not repeatedly torquing a fastener into the aluminum block threads, so you're easier on the block and you get a more accurate, repeatable clamp.\u003c\/p\u003e\n\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\n\u003cp\u003eFits the K20C 2.0T engine (K20C1, K20C4, K20C6, K20C8):\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003e2017-2021 Honda Civic Type R (FK8)\u003c\/li\u003e\n    \u003cli\u003e2023-2027 Honda Civic Type R (FL5)\u003c\/li\u003e\n    \u003cli\u003e2024-2027 Acura Integra Type S (DE5)\u003c\/li\u003e\n    \u003cli\u003e2019-2025 Acura RDX 2.0T\u003c\/li\u003e\n    \u003cli\u003e2018-2022 Honda Accord 2.0T\u003c\/li\u003e\n    \u003cli\u003e2021-2025 Acura TLX Type S\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n \n\u003cli id=\"VehicleFitment\"\u003e\n \u003cp\u003e2024-2027 Acura Integra Type S\u003cbr\u003e2019-2025 Acura RDX\u003cbr\u003e2021-2025 Acura TLX Type S\u003cbr\u003e2018-2022 Honda Accord 2.0T\u003cbr\u003e2017-2021 Honda Civic Type R\u003cbr\u003e2023-2027 Honda Civic Type R\u003c\/p\u003e \n\u003c\/li\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\u003c\/ul\u003e\n","brand":"InlinePro","offers":[{"title":"Alloy - Extreme Duty","offer_id":69844137050146,"sku":"ILP-HS-K20C4","price":249.95,"currency_code":"USD","in_stock":false},{"title":"Super Alloy - Xtreme Power","offer_id":69844137082914,"sku":"ILP-HS-K20C4SA","price":399.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2218\/5701\/files\/inlinepro-head-studs-for-the-c_ype7.png?v=1794710005"},{"product_id":"inline-pro-k20a-k20z-k24a-timing-chain-tensioner","title":"InlinePro K20A\/K20Z\/K24A Timing Chain Tensioner","description":"\u003cul\u003e\n\u003cli\u003eFixes K-Series Chain Rattle for Good \u003c\/li\u003e\n\u003cli\u003eFail-Safe Holds Tension at Low Oil Pressure \u003c\/li\u003e\n\u003cli\u003eProven in the Fastest K-Series Engines \u003c\/li\u003e\n\u003cli\u003eDoes Not Fit K24Z (R40 Tensioner) \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- split --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli\u003e\u003ca class=\"active\" href=\"#Description\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\n \u003cli\u003e\u003ca href=\"#VehicleFitment\"\u003eVehicle Fitment\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\n\n\u003cli class=\"active\" id=\"Description\"\u003e\n\u003ch3\u003eInlinePro K20\/K24 Race Timing Chain Tensioner\u003c\/h3\u003e\n\n\u003cp\u003eThe timing chain tensioner is one of those parts you never think about until the stock one fails, and on a K-series that failure can take the whole engine with it. This InlinePro Race Spec tensioner is the fix. It's been tested and abused by some of the fastest K-series engines on the planet, and it's built to keep your timing chain under control whether you're running big cams, small cams, a street motor, a full race build, turbo, or all-motor. If you've chased a chain rattle or had faulty-tensioner headaches, this is the part that puts the problem to rest.\u003c\/p\u003e\n\n\u003ch4\u003eWhat a Timing Chain Tensioner Does\u003c\/h4\u003e\n\n\u003cp\u003eYour timing chain ties the crankshaft to the camshafts and keeps your valve timing locked to the pistons. As the chain runs and wears it stretches and picks up slack, and something has to take that slack up and hold the chain tight, which is the tensioner's entire job. It pushes against the chain guide to keep constant tension so the chain can't go loose or whip around. That matters more than it sounds, because a loose chain slaps and rattles, and in the worst case it can skip a tooth and jump your timing. On an interference engine like the K-series, jumped timing means the valves and the pistons try to occupy the same space, and that's bent valves and a destroyed engine in an instant.\u003c\/p\u003e\n\n\u003ch4\u003eSigns Your Stock Tensioner Is Failing\u003c\/h4\u003e\n\n\u003cp\u003eThe classic symptom is a rattle from the front of the engine, and it's usually worst on a cold start or at idle, often fading once the engine warms up and oil pressure comes up. A lot of people hear that intermittent chain rattle and assume it's something minor, but it's the tensioner losing its grip on the chain, and it only gets worse from there. If your K-series has developed a rattle or tick that comes and goes with temperature and RPM, a tired tensioner is one of the first things to suspect, and this is the upgrade that fixes it for good instead of just quieting it down for a while.\u003c\/p\u003e\n\n\u003ch4\u003eWhy the Stock Tensioner Isn't Enough\u003c\/h4\u003e\n\n\u003cp\u003eThe factory K-series tensioner relies on oil pressure to do its job, and that's the root of its problems. At the exact moments the chain needs tension the most, a cold start before pressure builds, high RPM, or a bit of oil starvation under hard cornering on a track car, the stock unit can lose its load and let the chain go slack. A built engine only makes it worse, because big cams, stiffer valve springs, and high RPM feed more load and more torsional whip into the chain than the factory piece was ever designed to handle. Put those together and you get the chain slap and the skipped-timing failure the stock tensioner is infamous for. Replacing it with a tensioner built for abuse takes that failure point off the table entirely.\u003c\/p\u003e\n\n\u003ch4\u003eBuilt-In Fail-Safe\u003c\/h4\u003e\n\n\u003cp\u003eThe key to this tensioner is its fail-safe design. Unlike the stock unit, it doesn't fully retract, so it holds a preload and keeps tension on the chain even if oil pressure drops for a moment, which is exactly the situation that gets a factory tensioner in trouble. That mechanical backstop is what lets it keep the chain tight and your timing safe under the hardest use, cold or hot, high RPM or low oil pressure. It's the part the fast cars run because it holds up where the factory piece gives out, and it's been proven doing exactly that in some of the hardest-run K-series engines out there.\u003c\/p\u003e\n\n\u003ch4\u003eWho Should Run One\u003c\/h4\u003e\n\n\u003cp\u003eThis isn't just a race-car part. It's for anyone building a K-series for more power, anyone chasing a chain rattle on a street car, and anyone who simply wants the stock tensioner's known weakness designed out of their engine. It's also the natural thing to install any time you're already in the front of the engine for cams, a chain, or a water pump, since you've got access and the part itself is cheap next to the cost of a motor that skipped timing.\u003c\/p\u003e\n\n\u003ch4\u003eInstall Note\u003c\/h4\u003e\n\n\u003cp\u003eBecause of that fail-safe design, this tensioner installs a little differently than stock, and it's important to know what's normal so you don't think something's wrong. It's normal to see at least three teeth exposed on the tensioner piston, and because it doesn't fully retract like the stock unit, it will have some preload when you install it. That's the fail-safe doing its job, not a defect.\u003c\/p\u003e\n\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\n\u003cp\u003eFits K20 and K24 Honda and Acura engines that use the PRB\/RBB-style tensioner, including:\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003eK20A\u003c\/li\u003e\n    \u003cli\u003eK20A2\u003c\/li\u003e\n    \u003cli\u003eK20Z\u003c\/li\u003e\n    \u003cli\u003eK24A\u003c\/li\u003e\n    \u003cli\u003eK24A2\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eDoes not fit the K24Z.\u003c\/strong\u003e The K24Z uses the different R40 tensioner, which is not the same as the PRB\/RBB tensioner this part replaces.\u003c\/p\u003e\n\u003c\/li\u003e\n\n \n\u003cli id=\"VehicleFitment\"\u003e\n \u003cp\u003e2002-2006 Acura RSX Base\/Type S\u003cbr\u003e2004-2008 Acura TSX\u003cbr\u003e2003-2007 Honda Accord (K Series)\u003cbr\u003e2002-2011 Honda Civic Si\u003cbr\u003e2002-2006 Honda CR-V\u003cbr\u003e2003-2011 Honda Element\u003c\/p\u003e \n\u003c\/li\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\u003c\/ul\u003e\n","brand":"InlinePro","offers":[{"title":"Default Title","offer_id":69847382622242,"sku":"ILP-KRTCT","price":189.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2218\/5701\/files\/ILP-K-TCT_otve.jpg?v=1794710751"},{"product_id":"inlinepro-k24z-timing-chain-tensioner-r40","title":"InlinePro K24Z3\/K24Z7 Race Timing Chain Tensioner","description":"\u003cul\u003e\n\u003cli\u003eFixes K24Z Chain Rattle for Good \u003c\/li\u003e\n\u003cli\u003eFail-Safe Holds Tension at Low Oil Pressure \u003c\/li\u003e\n\u003cli\u003eBuilt Specifically for the R40 Engine \u003c\/li\u003e\n\u003cli\u003eFits K24Z3 and K24Z7 2.4L \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- split --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli\u003e\u003ca class=\"active\" href=\"#Description\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\n \u003cli\u003e\u003ca href=\"#VehicleFitment\"\u003eVehicle Fitment\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\n\n\u003cli class=\"active\" id=\"Description\"\u003e\n\u003ch3\u003eInlinePro K24Z3\/K24Z7 Race Timing Chain Tensioner\u003c\/h3\u003e\n\n\u003cp\u003eThe timing chain tensioner is one of those parts you never think about until the stock one fails, and on a K24Z it can take the whole engine with it. This InlinePro Race Spec tensioner is the fix, built specifically for the K24Z3 and K24Z7, the 2.4L engine commonly known as the R40. It's the solution to the faulty-tensioner headaches these engines are known for, and it's built to keep your timing chain under control whether you're running big cams, small cams, a street motor, a full race build, turbo, or all-motor. If you've chased a chain rattle on your R40 or had tensioner trouble, this is the part that puts it to rest.\u003c\/p\u003e\n\n\u003ch4\u003eWhat a Timing Chain Tensioner Does\u003c\/h4\u003e\n\n\u003cp\u003eYour timing chain ties the crankshaft to the camshafts and keeps your valve timing locked to the pistons. As the chain runs and wears it stretches and picks up slack, and something has to take that slack up and hold the chain tight, which is the tensioner's entire job. It pushes against the chain guide to keep constant tension so the chain can't go loose or whip around. That matters more than it sounds, because a loose chain slaps and rattles, and in the worst case it can skip a tooth and jump your timing. On an interference engine like the K24Z, jumped timing means the valves and the pistons try to occupy the same space, and that's bent valves and a destroyed engine in an instant.\u003c\/p\u003e\n\n\u003ch4\u003eSigns Your Stock Tensioner Is Failing\u003c\/h4\u003e\n\n\u003cp\u003eThe classic symptom is a rattle from the front of the engine, and it's usually worst on a cold start or at idle, often fading once the engine warms up and oil pressure comes up. A lot of people hear that intermittent chain rattle and assume it's something minor, but it's the tensioner losing its grip on the chain, and it only gets worse from there. If your K24Z has developed a rattle or tick that comes and goes with temperature and RPM, a tired tensioner is one of the first things to suspect, and this is the upgrade that fixes it for good instead of just quieting it down for a while.\u003c\/p\u003e\n\n\u003ch4\u003eWhy the Stock Tensioner Isn't Enough\u003c\/h4\u003e\n\n\u003cp\u003eThe factory tensioner relies on oil pressure to do its job, and that's the root of its problems. At the exact moments the chain needs tension the most, a cold start before pressure builds, high RPM, or a bit of oil starvation under hard cornering on a track car, the stock unit can lose its load and let the chain go slack. A built engine only makes it worse, because big cams, stiffer valve springs, and high RPM feed more load and more torsional whip into the chain than the factory piece was ever designed to handle. Put those together and you get the chain slap and the skipped-timing failure the stock tensioner is infamous for. Replacing it with a tensioner built for abuse takes that failure point off the table entirely.\u003c\/p\u003e\n\n\u003ch4\u003eBuilt-In Fail-Safe\u003c\/h4\u003e\n\n\u003cp\u003eThe key to this tensioner is its fail-safe design. Unlike the stock unit, it doesn't fully retract, so it holds a preload and keeps tension on the chain even if oil pressure drops for a moment, which is exactly the situation that gets a factory tensioner in trouble. That mechanical backstop is what lets it keep the chain tight and your timing safe under the hardest use, cold or hot, high RPM or low oil pressure. It's the kind of part that holds up where the factory piece gives out, lap after lap.\u003c\/p\u003e\n\n\u003ch4\u003eWho Should Run One\u003c\/h4\u003e\n\n\u003cp\u003eThis isn't just a race-car part. It's for anyone building a K24Z for more power, anyone chasing a chain rattle on a street car, and anyone who simply wants the stock tensioner's known weakness designed out of their engine. It's also the natural thing to install any time you're already in the front of the engine for cams, a chain, or a water pump, since you've got access and the part itself is cheap next to the cost of a motor that skipped timing.\u003c\/p\u003e\n\n\u003ch4\u003eInstall Note\u003c\/h4\u003e\n\n\u003cp\u003eBecause of that fail-safe design, this tensioner installs a little differently than stock, and it's important to know what's normal so you don't think something's wrong. It's normal to see at least three teeth exposed on the tensioner piston, and because it doesn't fully retract like the stock unit, it will have some preload when you install it. That's the fail-safe doing its job, not a defect.\u003c\/p\u003e\n\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\n\u003cp\u003eFits the K24Z3 and K24Z7 2.4L engines, commonly referred to as the R40:\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003e2013-2015 Acura ILX 2.4L (K24Z7)\u003c\/li\u003e\n    \u003cli\u003e2012-2015 Honda Civic Si 2.4L (K24Z7)\u003c\/li\u003e\n    \u003cli\u003e2008-2012 Honda Accord 2.4L (K24Z3)\u003c\/li\u003e\n    \u003cli\u003e2009-2014 Acura TSX 2.4L (K24Z3)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis is the R40-specific tensioner. It is the correct part for the K24Z engines and is a different design from the PRB\/RBB tensioner used on the earlier K20 and K24A engines.\u003c\/p\u003e\n\u003c\/li\u003e\n\n \n\u003cli id=\"VehicleFitment\"\u003e\n \u003cp\u003e2013-2015 Acura ILX\u003cbr\u003e2009-2014 Acura TSX\u003cbr\u003e2008-2012 Honda Accord (K Series)\u003cbr\u003e2012-2015 Honda Civic Si\u003c\/p\u003e \n\u003c\/li\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\u003c\/ul\u003e\n","brand":"InlinePro","offers":[{"title":"Default Title","offer_id":69847562321954,"sku":"ILP-KRTCT-Z7","price":199.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2218\/5701\/files\/ILP-KRTCT-Z7_imx3.jpg?v=1794711355"},{"product_id":"inline-pro-j-series-timing-belt-tensioner-j32a-j35a","title":"InlinePro J Series Timing Belt Tensioner for CL\/TL\/Accord","description":"\u003cul\u003e\n\u003cli\u003eRace Brace Reinforces the Weak Pivot \u003c\/li\u003e\n\u003cli\u003eBuilt for the J32A\/J35A V6 \u003c\/li\u003e\n\u003cli\u003eLocking Set Screw, Grade 12.9 Hardware \u003c\/li\u003e\n\u003cli\u003eProtects an Interference V6 Engine \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- split --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli\u003e\u003ca class=\"active\" href=\"#Description\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\n \u003cli\u003e\u003ca href=\"#VehicleFitment\"\u003eVehicle Fitment\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\n\n\u003cli class=\"active\" id=\"Description\"\u003e\n\u003ch3\u003eInlinePro J-Series V6 Timing Belt Tensioner (Race Brace)\u003c\/h3\u003e\n\n\u003cp\u003eInlinePro brought you the market's best F-series and K-series tensioners, and now the same treatment comes to the J-series V6. This is their Xtreme Duty J-series timing belt tensioner with the \"Race Brace,\" built to fix the weak spot that makes the stock J-series tensioner a liability. On an interference V6 like this one, the timing belt staying properly tensioned isn't optional, it's what stands between a running engine and a very expensive one, and this tensioner is built to keep it that way under hard use.\u003c\/p\u003e\n\n\u003ch4\u003eWhat a Timing Belt Tensioner Does\u003c\/h4\u003e\n\n\u003cp\u003eThe J-series V6 uses a timing belt to tie the crankshaft to the camshafts and keep the valves timed to the pistons. That belt has to be held at exactly the right tension, because a belt that's too loose can jump a tooth or skip timing, and one that's too tight wears itself out early. The tensioner is what maintains that correct tension as the belt stretches and as temperatures change. It matters enormously here because the J-series is an interference engine, which means if the belt skips or lets go, the valves and pistons collide, and that's bent valves and a destroyed engine. Keeping belt tension right is the whole ballgame, and the tensioner is the part responsible for it.\u003c\/p\u003e\n\n\u003ch4\u003eThe Weak Spot It Fixes\u003c\/h4\u003e\n\n\u003cp\u003eThe main failure point on the stock J-series tensioner is the pivot in the adjustment arm. That pivot takes the load of holding belt tension, and it's the spot that flexes and wears over time, which is exactly where you don't want weakness on a part this critical. InlinePro's Race Brace reinforces that pivot point directly, taking the main weak spot out of the design so the arm holds its position and keeps the belt where it needs to be. It's a targeted fix to the one thing most likely to cause trouble.\u003c\/p\u003e\n\n\u003ch4\u003eThe Race Brace and Hardware\u003c\/h4\u003e\n\n\u003cp\u003eBeyond reinforcing the pivot, this tensioner is built for easy, secure setup. It features a unique locking mechanism for the extra-large set screw that holds the tensioner arm, which makes access and adjustment straightforward while keeping the arm locked down where you set it. All of the included hardware is grade 12.9 for Xtreme Duty strength, so the fasteners are as tough as the brace itself and there's no weak link in the assembly.\u003c\/p\u003e\n\n\u003ch4\u003eWhen to Install It\u003c\/h4\u003e\n\n\u003cp\u003eThe natural time to do this is during a timing belt service. On these V6s the belt is a scheduled maintenance item, usually replaced along with the water pump and idlers at the recommended interval, and that's exactly when you have access to swap in a stronger tensioner. If you're building the engine, running higher RPM, or forced-inducting a J-series, reinforcing the tensioner matters even more, because everything that stresses the valvetrain also stresses the belt and the part holding its tension. Whether you're doing routine maintenance or building for power, it's cheap insurance against the one failure that takes out the whole motor.\u003c\/p\u003e\n\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\n\u003cp\u003eThis tensioner fits the belt-driven J-series V6 across all four engine families:\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eJ30 family:\u003c\/strong\u003e J30A1, J30A3, J30A4, J30A5 — found in the Honda Accord and Accord Crosstour\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eJ32 family:\u003c\/strong\u003e J32A1, J32A3 — found in the Acura CL, TL, and TSX V6\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eJ35 family:\u003c\/strong\u003e J35A1, J35A3, J35A4, J35A5, J35A6, J35A7, J35A8, J35A9, and many J35Z-series variants — found in the Acura MDX, Honda Odyssey, Honda Pilot, and Honda Ridgeline\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eJ37 family:\u003c\/strong\u003e J37A1, J37A2, J37A4, J37A5 — found in the Acura MDX, RL, and ZDX\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eCommon vehicle applications include:\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003e1999-2003 Acura TL\u003c\/li\u003e\n    \u003cli\u003e2001-2003 Acura CL Type S\u003c\/li\u003e\n    \u003cli\u003e2004-2008 Acura TL\u003c\/li\u003e\n    \u003cli\u003e2007-2008 Acura TL Type S\u003c\/li\u003e\n    \u003cli\u003e2005-2008 Acura RL\u003c\/li\u003e\n    \u003cli\u003e2001-2006 Acura MDX\u003c\/li\u003e\n\u003cli\u003e1998-2002 Honda Accord\u003c\/li\u003e\n\u003cli\u003e2003-2017 Honda Accord\u003c\/li\u003e\n    \u003cli\u003e1999-2010 Honda Odyssey\u003c\/li\u003e\n    \u003cli\u003e2003-2008 Honda Pilot\u003c\/li\u003e\n    \u003cli\u003e2006-2008 Honda Ridgeline\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe J-series spans a wide range of Honda and Acura vehicles built from the late 1990s onward, so confirm your engine is one of the belt-driven codes above before ordering.\u003c\/p\u003e\n\u003c\/li\u003e\n\n \n\u003cli id=\"VehicleFitment\"\u003e\n \u003cp\u003e1999-2003 Acura TL\u003cbr\u003e2001-2003 Acura CL Type S\u003cbr\u003e2004-2008 Acura TL\u003cbr\u003e2007-2008 Acura TL Type S\u003cbr\u003e2005-2008 Acura RL\u003cbr\u003e2001-2006 Acura MDX\u003cbr\u003e1998-2002 Honda Accord\u003cbr\u003e2003-2017 Honda Accord\u003cbr\u003e1999-2010 Honda Odyssey\u003cbr\u003e2003-2008 Honda Pilot\u003cbr\u003e2006-2008 Honda Ridgeline\u003c\/p\u003e\n    \n    \n    \n    \n    \n    \n    \n     \n\u003c\/li\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\u003c\/ul\u003e\n","brand":"InlinePro","offers":[{"title":"Default Title","offer_id":69847865950242,"sku":"ILP-J-RTBT","price":249.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2218\/5701\/files\/inlinepro-j32a-j5a-timing-belt_4f1w.jpg?v=1794767162"},{"product_id":"inline-pro-f20c-f22c-timing-chain-tensioner-00-09-s2000","title":"InlinePro F20C\/F22C Timing Chain Tensioner for 00-09 S2000","description":"\u003cul\u003e\n\u003cli\u003eHolds Chain Tension Where Stock Fails \u003c\/li\u003e\n\u003cli\u003eFixes Start-Up and Idle Rattle \u003c\/li\u003e\n\u003cli\u003eBuilt for High-Lift Cams and Stiffer Springs \u003c\/li\u003e\n\u003cli\u003eFits F20C and F22C Engines \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- split --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli\u003e\u003ca class=\"active\" href=\"#Description\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\n \u003cli\u003e\u003ca href=\"#VehicleFitment\"\u003eVehicle Fitment\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\n\n\u003cli class=\"active\" id=\"Description\"\u003e\n\u003ch3\u003eInlinePro Race Timing Chain Tensioner - 2000-2009 Honda S2000 (F20C\/F22C)\u003c\/h3\u003e\n\n\u003cp\u003eThe F-series in the S2000 uses a timing chain to tie the crankshaft to the camshafts and keep the valves timed to the pistons. That chain has to stay taut, and the tensioner is the part responsible for taking up slack as the chain stretches and the guides wear over the life of the engine. It matters a great deal here because the F20C and F22C are interference engines, which means if the chain goes slack enough to jump a tooth and lose timing, the valves and pistons collide and the result is bent valves and a destroyed motor. The stock hydraulic tensioner does the job on a healthy, stock engine, but it has well-known weaknesses that get worse with age and with power, and this InlinePro race tensioner is built to fix them.\u003c\/p\u003e\n\n\u003ch4\u003eWhat Goes Wrong with the Stock Tensioner\u003c\/h4\u003e\n\n\u003cp\u003eThe factory tensioner relies on oil pressure behind a piston to hold tension, and that design gets caught out by exactly the kind of driving an S2000 invites. When you lift off the throttle after a high-rpm pull, the sudden change in the drivetrain's momentum slams slack into the chain while the oil pressure behind the tensioner drops at the same moment, so the unit can't take that slack up cleanly. Hard downshifts and engine braking do the same thing, loading the chain in a way the stock tensioner struggles to keep ahead of. Over time the chain stretches and the guides wear, and the slack in the whole assembly only grows.\u003c\/p\u003e\n\n\u003cp\u003eThe symptom most owners notice first is noise: a rattle at start-up and idle. That comes from the lack of oil pressure behind the tensioner piston before the engine builds pressure, combined with wear on the stock unit's screw gear mechanism. On its own it's an annoyance, but it's also the early sign that the tensioner is no longer holding the chain the way it should.\u003c\/p\u003e\n\n\u003ch4\u003eIt Gets Worse on a Built Engine\u003c\/h4\u003e\n\n\u003cp\u003eEverything that makes the F-series more exciting also makes the chain harder to control. Higher-tension valve springs and high-lift camshafts increase the loads cycling through the valvetrain, and that feeds directly into chain slack that the stock tensioner wasn't designed to manage. If you're building the engine, you're stacking exactly the conditions that overwork the factory unit. Every one of these situations, from spirited street driving to a full built valvetrain, works the stock tensioner harder and brings it closer to failure. InlinePro developed this race tensioner to address all of them, holding firm, positive tension on the chain where the hydraulic stock unit loses its grip.\u003c\/p\u003e\n\n\u003ch4\u003eWarning: Not Compatible with the 3mm Head Gasket\u003c\/h4\u003e\n\n\u003cp\u003e\u003cstrong\u003eThis tensioner cannot be used with InlinePro's 3mm head gasket.\u003c\/strong\u003e If your build runs that thicker head gasket, this is not the right tensioner for your engine, so confirm your head gasket before ordering. Running the wrong combination will not work, and this is the one fitment detail you have to get right on this part.\u003c\/p\u003e\n\n\u003ch4\u003eWhen to Install It\u003c\/h4\u003e\n\n\u003cp\u003eThe natural time to do this is any time the front of the engine is open, such as during a timing chain service or a valvetrain build. If you're upgrading to high-lift cams and stiffer springs, reinforcing the tensioner at the same time makes sense, because you're adding the exact loads that defeat the stock unit. And if your car has started rattling at start-up, that's the stock tensioner telling you it's on the way out. Compared to the cost of an interference engine that skipped timing, a better tensioner is cheap insurance.\u003c\/p\u003e\n\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\n\u003cp\u003eThis race timing chain tensioner fits the 2000-2009 Honda S2000, both the AP1 (F20C) and the AP2 (F22C). It is not compatible with the InlinePro 3mm head gasket, as noted above.\u003c\/p\u003e\n\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\n\u003cp\u003eThe tensioner is accessed at the front of the engine where it mounts against the timing chain. This is engine-timing work, so it's a job for an experienced mechanic or a shop familiar with the F-series, and getting the chain tension and timing correct is critical on an interference engine. Follow the service procedure carefully, and verify your head gasket thickness before you begin.\u003c\/p\u003e\n\u003c\/li\u003e\n\n \n\u003cli id=\"VehicleFitment\"\u003e\n \u003cp\u003e2000-2009 Honda S2000\u003c\/p\u003e \n\u003c\/li\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\u003c\/ul\u003e\n","brand":"InlinePro","offers":[{"title":"Default Title","offer_id":69873026400290,"sku":"ILP-S2K-TCTN","price":349.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2218\/5701\/files\/ILP-S2K-TCTN_4i6f.jpg?v=1794789691"},{"product_id":"inline-pro-b-series-vtec-head-gasket-ls-vtec-b20-vtec","title":"InlinePro LS VTEC\/B20 VTEC Head Gasket","description":"\u003cul\u003e\n\u003cli\u003eWorks with Hybrid B Series Engine Setups \u003c\/li\u003e\n\u003cli\u003eTwo Variants for LS or B20 Blocks \u003c\/li\u003e\n\u003cli\u003eCorrect Bore and Oil-Feed Porting \u003c\/li\u003e\n\u003cli\u003e0.030\" Gasket Thickness \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- split --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli\u003e\u003ca class=\"active\" href=\"#Description\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\n \u003cli\u003e\u003ca href=\"#VehicleFitment\"\u003eVehicle Fitment\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\n\n\u003cli class=\"active\" id=\"Description\"\u003e\n\u003ch3\u003eInlinePro B-Series VTEC Hybrid Head Gasket - LS\/VTEC \u0026amp; B20\/VTEC\u003c\/h3\u003e\n\n\u003cp\u003eThe LS\/VTEC and B20\/VTEC builds are two of the most popular ways to get displacement and VTEC in one B-series engine. The idea is simple: start with a larger non-VTEC bottom end, either the 1.8L LS block (B18B1) or the 2.0L block out of a CR-V (B20), and bolt a B-series VTEC cylinder head (B16A or B18C) on top. You end up with the extra displacement of the bigger block feeding the better-flowing, higher-revving VTEC head, which is why these hybrids have been a staple of Honda builds for decades. The one thing the combination won't do on its own is seal, because the VTEC head was never designed to sit on these blocks. That's where this gasket comes in.\u003c\/p\u003e\n\n\u003ch4\u003eChoose the Variant That Matches Your Block\u003c\/h4\u003e\n\n\u003cp\u003eThis page carries two different gaskets, and the one you need is determined entirely by your bottom end:\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLS\/VTEC Head Gasket (ILP-LSV-HD):\u003c\/strong\u003e for a B18B1 \"LS\" block running a B16A or B18C VTEC head. This is the gasket for the 81mm-bore LS bottom end.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eB20\/VTEC Head Gasket (ILP-B20-HG):\u003c\/strong\u003e for a B20 CR-V block running a B16A or B18C VTEC head. This is the gasket for the larger 84mm-bore B20 bottom end.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe difference between them is not cosmetic. The LS and B20 blocks have different bore sizes, so each gasket is cut with the correct bore opening and the coolant and oil passages needed to bridge that specific block to the VTEC head, including the oil feed the VTEC head requires to run its spool valve. Put the wrong one on and the bore and ports won't line up the way they need to, so getting this match right is the whole point.\u003c\/p\u003e\n\n\u003ch4\u003eGasket Thickness Sets Your Compression\u003c\/h4\u003e\n\n\u003cp\u003eDropping a high-compression VTEC head onto a larger-displacement block raises the static compression ratio, sometimes higher than you want, depending on your exact combination of block, head, and pistons. Head gasket thickness is one of the main tools you use to dial that compression in. A thicker gasket lowers compression, which you might want to stay safe on pump gas or to leave room for boost, while a thinner one raises it for a naturally aspirated build chasing response. The right thickness depends on what you're building and what you're running for fuel.\u003c\/p\u003e\n\n\u003ch4\u003eNot Sure Which Thickness You Need? Ask First\u003c\/h4\u003e\n\n\u003cp\u003eBecause the correct gasket depends on your specific combination and your compression target, it's worth confirming before you order rather than guessing. If you're building an LS\/VTEC or a B20\/VTEC and you're not sure which thickness suits your target compression, tell us your full combination, the block, head, pistons, and whether you're going naturally aspirated or boosted, and we'll confirm the right part for you before you buy. It's a lot cheaper than finding out after the engine's together.\u003c\/p\u003e\n\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\n\u003cp\u003eA head gasket swap is engine-timing work, so it's a job for an experienced builder or a shop familiar with B-series hybrids. Make sure both the block deck and the head are clean, flat, and within spec before assembly, use fresh head studs or bolts torqued in the correct sequence to spec, and confirm your final compression ratio matches your fuel and tune. On a hybrid build especially, taking the time to verify everything before final assembly is what keeps the engine sealing and living.\u003c\/p\u003e\n\u003c\/li\u003e\n\n \n\u003cli id=\"VehicleFitment\"\u003e\n \u003cp\u003e1990-2001 Acura Integra\u003cbr\u003e1988-2000 Honda Civic\u003cbr\u003e1997-2001 Honda CR-V\u003cbr\u003e1988-1991 Honda CRX\u003cbr\u003e1993-1997 Honda Del Sol\u003c\/p\u003e \n\u003c\/li\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\u003c\/ul\u003e\n","brand":"InlinePro","offers":[{"title":"LS VTEC","offer_id":69873479778338,"sku":"ILP-LSV-HD","price":129.99,"currency_code":"USD","in_stock":false},{"title":"B20 VTEC","offer_id":69873479811106,"sku":"ILP-B20-HG","price":129.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2218\/5701\/files\/inlinepro-ls-vtec-b20-vtec-hea_lv1i.jpg?v=1794787490"},{"product_id":"inline-pro-k-series-head-gasket","title":"InlinePro 86-88.5mm K20A\/K20Z\/K24A Head Gasket","description":"\u003cul\u003e\n\u003cli\u003eMulti-Layer Steel Seals under Boost and Compression \u003c\/li\u003e\n\u003cli\u003eSix Bore Sizes from 86 to 88.5mm \u003c\/li\u003e\n\u003cli\u003eConsistent 0.030\" Thickness \u003c\/li\u003e\n\u003cli\u003eFits K20 and K24 Builds \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- split --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli\u003e\u003ca class=\"active\" href=\"#Description\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\n \u003cli\u003e\u003ca href=\"#VehicleFitment\"\u003eVehicle Fitment\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\n\n\u003cli class=\"active\" id=\"Description\"\u003e\n\u003ch3\u003eInlinePro K-Series MLS Head Gasket - K20 \u0026amp; K24\u003c\/h3\u003e\n\n\u003cp\u003eThe head gasket seals the combustion chambers along with the coolant and oil passages between the block and the cylinder head, and on a K-series that you're building for more power it tends to be one of the first parts to let go if it isn't up to the job, which is why it's worth not cutting corners on. This one is a multi-layer steel gasket, which just means it's made from several thin layers of stainless steel bonded together instead of the composite material the factory used, and that layered steel is what lets it keep sealing when cylinder pressures and temperatures climb well past stock, so once you've raised the compression or added boost or started spraying the motor it holds where a composite gasket would begin to give up and eventually blow out the moment the pressure in a cylinder spikes.\u003c\/p\u003e\n\n\u003ch4\u003eChoose the Bore Size to Match Your Block\u003c\/h4\u003e\n\n\u003cp\u003eThis gasket comes in six bore sizes so you can match it to your engine's actual cylinder bore, which is the one selection you really need to get right on this page:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e86mm\u003c\/li\u003e\n\u003cli\u003e86.5mm\u003c\/li\u003e\n\u003cli\u003e87mm\u003c\/li\u003e\n\u003cli\u003e87.5mm\u003c\/li\u003e\n\u003cli\u003e88mm\u003c\/li\u003e\n\u003cli\u003e88.5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eA stock K20 comes in at an 86mm bore and a stock K24 at 87mm, so if the engine hasn't been touched you just take the gasket that matches, but if the block has been bored out for a bigger set of pistons then you want the gasket size that clears whatever your final machined bore ended up being. The reason it matters is that the gasket opening has to sit just outside the cylinder wall, so you go with a bore size that's equal to or a touch larger than your pistons rather than anything smaller, because a gasket ring that hangs down into the cylinder isn't going to seal right and ends up in the way of the piston and ring pack as they come up the bore. The number you're working from, in other words, is whatever the block actually measures now that it's been machined, not what it displaced the day you bought it, which is an easy thing to lose track of if the boring happened a while ago.\u003c\/p\u003e\n\n\u003ch4\u003e0.030\" Thickness\u003c\/h4\u003e\n\n\u003cp\u003eAll six sizes share the same 0.030\" thickness, and because that compressed thickness is a known, consistent figure you can fold it straight into your compression and quench math while you're spec'ing the build. With the thickness fixed across the whole range, the only thing you're actually choosing between on this page is bore size.\u003c\/p\u003e\n\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\n\u003cp\u003eThis MLS head gasket fits the K20 and K24 engines, specifically the K20A2, K20A3, K20Z1, K20Z3, K24A1, K24A2, K24A4, and K24A8, as found in:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e2002-2006 Acura RSX Base \/ Type-S\u003c\/li\u003e\n\u003cli\u003e2004-2008 Acura TSX\u003c\/li\u003e\n\u003cli\u003e2003-2007 Honda Accord\u003c\/li\u003e\n\u003cli\u003e2002-2005 Honda Civic Si\u003c\/li\u003e\n\u003cli\u003e2006-2011 Honda Civic Si\u003c\/li\u003e\n\u003cli\u003e2002-2006 Honda CR-V\u003c\/li\u003e\n\u003cli\u003e2003-2011 Honda Element\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eConfirm your final bore size before ordering so the gasket matches the block you actually have.\u003c\/p\u003e\n\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\n\u003cp\u003eAn MLS gasket doesn't seal the same way a composite one does, and it's a good deal less forgiving of a rough or uneven surface, so before anything goes back together you want both the block deck and the head clean, flat, and machined to the surface finish the steel layers need to bite against, which in practice usually means having the deck resurfaced and checked for flatness if there's any doubt about it at all. From there it's the same care any serious K-series assembly deserves, running quality head studs and torquing them down in the right sequence to spec, and then checking that the compression ratio you end up with actually agrees with the fuel you plan to run and the tune behind it, since an MLS gasket will take a lot of abuse but only when the surfaces it's clamped between and the clamping load holding it there are both where they should be.\u003c\/p\u003e\n\u003c\/li\u003e\n\n \n\u003cli id=\"VehicleFitment\"\u003e\n \u003cp\u003e2002-2006 Acura RSX Base\/Type S\u003cbr\u003e2004-2008 Acura TSX\u003cbr\u003e2003-2007 Honda Accord\u003cbr\u003e2002-2005 Honda Civic Si\u003cbr\u003e2006-2011 Honda Civic Si\u003cbr\u003e2002-2006 Honda CR-V\u003cbr\u003e2003-2011 Honda Element\u003c\/p\u003e \n\u003c\/li\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\u003c\/ul\u003e\n","brand":"InlinePro","offers":[{"title":"86mm","offer_id":69874376507426,"sku":"ILP-HG-K86","price":129.94,"currency_code":"USD","in_stock":false},{"title":"86.5mm","offer_id":69874376540194,"sku":"ILP-HG-K86.5","price":129.94,"currency_code":"USD","in_stock":false},{"title":"87mm","offer_id":69874376572962,"sku":"ILP-HG-K87","price":129.94,"currency_code":"USD","in_stock":false},{"title":"87.5mm","offer_id":69874376605730,"sku":"ILP-HG-K87.5","price":129.94,"currency_code":"USD","in_stock":false},{"title":"88mm","offer_id":69874376638498,"sku":"ILP-HG-K88","price":129.94,"currency_code":"USD","in_stock":false},{"title":"88.5mm","offer_id":69874376671266,"sku":"ILP-HG-K88.5","price":129.94,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2218\/5701\/files\/inlinepro-k20a-k20z-k24a-head_leri.jpg?v=1794789726"},{"product_id":"inline-pro-l15b7-l15ba-l15ca-head-gasket","title":"InlinePro L15B7\/L15CA Head Gasket for 16-27 Civic\/Integra 1.5T","description":"\u003cul\u003e\n\u003cli\u003eThree-Layer MLS Seals Boosted 1.5T Builds \u003c\/li\u003e\n\u003cli\u003eTwo Bore Sizes for Each Engine Generation \u003c\/li\u003e\n\u003cli\u003eXtreme Duty Upgrade over the Weak Factory Gasket \u003c\/li\u003e\n\u003cli\u003eConsistent 0.036\" Thickness \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- split --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli\u003e\u003ca class=\"active\" href=\"#Description\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\n \u003cli\u003e\u003ca href=\"#VehicleFitment\"\u003eVehicle Fitment\u003c\/a\u003e\u003c\/li\u003e   \u003cli\u003e\u003ca href=\"#Included\"\u003eIncluded\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\n\n\u003cli class=\"active\" id=\"Description\"\u003e\n\u003ch3\u003eInlinePro L15B7 \/ L15CA 1.5T Xtreme Duty MLS Head Gasket\u003c\/h3\u003e\n\n\u003cp\u003eHonda's 1.5T has a head gasket reputation, and not a good one. The engine makes boost from the factory, so the gasket is already working harder than the one in a naturally aspirated motor. Then you add a tune and more airflow. Cylinder pressure climbs, and the factory gasket is usually the first thing to start complaining. It was built to seal a stock engine and nothing past that, which is fine until the day you ask it for more. This InlinePro Xtreme Duty gasket is the answer. It swaps that composite factory piece for three bonded layers of stainless steel, and the steel is the whole point. Each layer adds clamping strength and sealing surface, so the gasket keeps the combustion chambers, the coolant jackets, and the oil passages sealed when pressure and heat run well past stock. That's the exact point where the original starts to seep coolant, push oil, or let go between cylinders. Tuning one of these past stock power? The gasket is cheap insurance against a job you really don't want to do twice.\u003c\/p\u003e\n\n\u003ch4\u003eChoose the Variant for Your Car\u003c\/h4\u003e\n\n\u003cp\u003eThere are two bore sizes, and this is the one detail you have to get right. Honda changed the bore slightly across the 1.5T's life, so the gasket has to match the engine you actually have:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e73.5mm bore\u003c\/strong\u003e - 2016-2021 Honda Civic 1.5T (EX-T, Sport, Sport Touring) and 2017-2020 Civic Si. This is the tenth-gen L15B7.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e73.0mm bore\u003c\/strong\u003e - 2018-2022 Honda Accord 1.5T, 2022-2027 Honda Civic 1.5T (Si, EX, Sport, Sport Touring), 2023-2027 Acura Integra (Base, A-Spec), and 2023-2027 Honda CR-V 1.5T. These share the later engine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThickness is the same 0.036\" on both, so bore is the thing that changes. The gasket opening has to line up with the cylinder it seals, which is why the wrong bore won't do. Each bore also has a fitment-specific version beyond the size. If you're not certain which your car takes, check the engine code before you order. The chassis and engine tell you what you need, not the model year on its own.\u003c\/p\u003e\n\n\u003ch4\u003eThree-Layer MLS at 0.036\"\u003c\/h4\u003e\n\n\u003cp\u003eEach gasket is a three-layer MLS build at a 0.036\" compressed thickness. That number is fixed and known, so your compression and quench math stays simple when you're spec'ing a built motor. The construction is where it earns its money. A composite gasket is one soft layer that relies on getting crushed to seal, and it gives up as pressure climbs. Three layers of spring steel clamp down and hold, flexing with the engine instead of fighting it. That's what lets it take the cylinder pressure a tuned 1.5T makes and keep sealing where the single-layer factory gasket was never built to.\u003c\/p\u003e\n\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\n\u003cp\u003eMLS seals by clamping flat steel against flat metal, so surface prep matters more than it does with a composite gasket. Both the deck and the head have to be clean and genuinely flat, machined to the surface finish the steel needs to bite against. A composite gasket will forgive a rough or slightly uneven surface. An MLS gasket won't, so if there's any doubt about either surface, have it checked and resurfaced before you go back together. From there it's the usual care a boosted build deserves. Run good head studs, torque them in the correct sequence to spec, and confirm your final compression works with your fuel and tune. Done right, this gasket holds up to serious boost. Done on a warped deck or with uneven clamping load, no gasket is going to save the engine.\u003c\/p\u003e\n\u003c\/li\u003e\n\n \n\u003cli id=\"VehicleFitment\"\u003e\n \u003cp\u003e2023-2027 Acura Integra Base\/ASpec\u003cbr\u003e2018-2022 Honda Accord 1.5T\u003cbr\u003e2016-2021 Honda Civic EX-T\/Sport\/Sport Touring\u003cbr\u003e2017-2020 Honda Civic Si\u003cbr\u003e2022-2027 Honda Civic EX\/Sport\/Sport Touring\/Si\u003c\/p\u003e \n\u003c\/li\u003e\n\n\n\n\n\n\n \n\u003cli id=\"Included\"\u003e\n\u003cp\u003e(1) Head Gasket\u003c\/p\u003e\n\u003c\/li\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\u003c\/ul\u003e\n","brand":"InlinePro","offers":[{"title":"16-21 Civic Si\/1.5T \/ 73mm","offer_id":69876721025058,"sku":"ILP-HG-L15B7-73","price":129.94,"currency_code":"USD","in_stock":false},{"title":"18-22 Accord 1.5T\/22-27 Civic\/Integra 1.5T \/ 73mm","offer_id":69876721057826,"sku":"ILP-HG-L15B7A-73","price":129.94,"currency_code":"USD","in_stock":false},{"title":"16-21 Civic Si\/1.5T \/ 73.5mm","offer_id":69876721090594,"sku":"ILP-HG-L15B7-735","price":129.94,"currency_code":"USD","in_stock":false},{"title":"18-22 Accord 1.5T\/22-27 Civic\/Integra 1.5T \/ 73.5mm","offer_id":69876721123362,"sku":"ILP-HG-L15B7A-735","price":129.94,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2218\/5701\/files\/inlinepro-l15b7-l15ca-head-gas_xzra.jpg?v=1794792365"},{"product_id":"inline-pro-h22-head-studs-honda-prelude","title":"InlinePro H22 Head Studs for 93-01 Honda Prelude","description":"\u003cul\u003e\n\u003cli\u003eHolds the Head Down under Boost \u003c\/li\u003e\n\u003cli\u003eTwo Materials, Alloy or Super Alloy \u003c\/li\u003e\n\u003cli\u003eResists Hydrogen Embrittlement, Unlike L19\/H11 \u003c\/li\u003e\n\u003cli\u003eFull True-Beam Design for Even Clamping \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- split --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli\u003e\u003ca class=\"active\" href=\"#Description\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\n \u003cli\u003e\u003ca href=\"#VehicleFitment\"\u003eVehicle Fitment\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\n\n\u003cli class=\"active\" id=\"Description\"\u003e\n\u003ch3\u003eInlinePro H22 Head Studs - 1993-2001 Honda Prelude\u003c\/h3\u003e\n\n\u003cp\u003eBoost an H22 and the factory head bolts become the weak link. Combustion pressure tries to shove the head off the block on every power stroke, and the stock torque-to-yield bolts only hold so much before the head lifts and the gasket lets go. Coolant in the oil, oil in the coolant, or a dead cylinder between two chambers. That's the failure these studs exist to prevent. The Prelude's H22 is one of the most swapped and boosted Honda engines out there, and head studs are one of the first things it needs before the power goes up.\u003c\/p\u003e\n\n\u003ch4\u003eWhy Studs Beat Factory Bolts\u003c\/h4\u003e\n\n\u003cp\u003eA torque-to-yield bolt is a one-time part. You torque it, it stretches past its yield point on purpose, and whatever hold you get is whatever's left when it stops stretching. Reuse one and it's weaker still. A stud skips all of that. It threads into the block finger-tight, carrying no load at all, and the nut on top is what actually tightens the head down. You torque the nut to a real number you can hit again and again, the load spreads evenly across the head, and the head quits lifting under boost. Pull the engine apart a year later and the studs come out and go right back in.\u003c\/p\u003e\n\n\u003ch4\u003eChoose Your Material\u003c\/h4\u003e\n\n\u003cp\u003eBoth are M12 M-series studs, cut from premium American stock, heat treated and tested in-house. What separates them is strength:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlloy, Extreme Duty (230kpsi):\u003c\/strong\u003e the pick for a strong street car or a moderate-boost build. 230,000 psi minimum tensile is a huge jump over the factory bolts and handles the majority of built H22s.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Alloy, Xtreme Power (260kpsi):\u003c\/strong\u003e the pick when the boost and the power targets get serious. 260,000 psi buys you more headroom for a motor making big cylinder pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePick for where the build is going, not where it sits right now. Buying the super alloy up front costs less than tearing the engine down again to step up later.\u003c\/p\u003e\n\n\u003ch4\u003eNo Hydrogen Embrittlement\u003c\/h4\u003e\n\n\u003cp\u003ePlenty of high-strength studs on the market are L19 or H11. Strong stuff, but it has a catch: both are prone to hydrogen embrittlement. Leave them exposed to moisture, skip the oil, handle them carelessly, and they can crack down the road. InlinePro's alloys don't carry that weakness. You can handle them, install them, and leave them in the engine without treating them like they might turn on you.\u003c\/p\u003e\n\n\u003ch4\u003eTrue-Beam Design\u003c\/h4\u003e\n\n\u003cp\u003eLook at a lot of competitor studs and you'll see a thinner section machined into the middle, necked down or undercut. These aren't. The beam runs full diameter end to end. A full-diameter beam flexes less and puts more of your torque into holding the head down instead of into stretching the stud, which also makes your torque readings more honest when you tighten the nuts.\u003c\/p\u003e\n\n\u003ch4\u003eWhat's in the Kit\u003c\/h4\u003e\n\n\u003cp\u003eStuds, nuts, washers, assembly lube, and instructions. Everything the job takes, in the box.\u003c\/p\u003e\n\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\n\u003cp\u003eFits the H22 VTEC engine in the 1993-2001 Honda Prelude.\u003c\/p\u003e\n\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\n\u003cp\u003eThis is a job for when the head is off, during a gasket or head service. Spin each stud into the block by hand only, never torqued into the block itself, and let the nuts up top do the work. Lube the threads and the underside of the nuts with what's in the kit, because dry threads lie to your torque wrench and leave the head under-clamped. Then work up to spec in stages, in the sequence the instructions give, and the head is locked down for whatever the H22 throws at it.\u003c\/p\u003e\n\u003c\/li\u003e\n\n \n\u003cli id=\"VehicleFitment\"\u003e\n \u003cp\u003e1992-1996 Honda Prelude\u003cbr\u003e1997-2001 Honda Prelude\u003c\/p\u003e \n\u003c\/li\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\u003c\/ul\u003e\n","brand":"InlinePro","offers":[{"title":"Alloy - Extreme Duty","offer_id":69878723182626,"sku":"ILP-HS-H22","price":349.95,"currency_code":"USD","in_stock":false},{"title":"Super Alloy - Xtreme Power","offer_id":69878723215394,"sku":"ILP-HS-H22SA","price":499.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2218\/5701\/files\/inlinepro-h22-head-studs-for-9_mfaj.jpg?v=1794793712"},{"product_id":"inline-pro-j32-j35-j37-head-studs-honda-j-series","title":"InlinePro J32\/J35\/J37 Head Studs for 03-17 Accord\/04-14 TL","description":"\u003cul\u003e\n\u003cli\u003eFull True-Beam Design for Even Clamping \u003c\/li\u003e\n\u003cli\u003eCompatible with J32, J35, and J37 Engines \u003c\/li\u003e\n\u003cli\u003eResists Hydrogen Embrittlement, Unlike L19\/H11 \u003c\/li\u003e\n\u003cli\u003e230kpsi M12 Premium American Alloy \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- split --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli\u003e\u003ca class=\"active\" href=\"#Description\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\n \u003cli\u003e\u003ca href=\"#VehicleFitment\"\u003eVehicle Fitment\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\n\n\u003cli class=\"active\" id=\"Description\"\u003e\n\u003ch3\u003eInlinePro J-Series Head Studs - J32 \/ J35 \/ J37\u003c\/h3\u003e\n\n\u003cp\u003eAdd power to a J-series V6 and the factory head bolts become the limit. Combustion pressure pushes the head up off the block, and the stock torque-to-yield bolts only hold so much before the head lifts and the gasket gives up. That shows up as coolant in the oil, oil in the coolant, or a lost cylinder between chambers. Head studs are what stop it. On a boosted or built J-series, they're one of the first upgrades the engine needs before the power goes up.\u003c\/p\u003e\n\n\u003ch4\u003eWhy Studs Beat Factory Bolts\u003c\/h4\u003e\n\n\u003cp\u003eA torque-to-yield bolt is a one-time part. You torque it, it stretches past its yield point by design, and the hold you get is whatever's left when it stops stretching. Reuse one and it's weaker still. A stud works nothing like that. It threads into the block finger-tight with no load on it, and the nut on top does the actual clamping. You torque the nut to a real, repeatable number, the load spreads evenly across the head, and the head stays put under boost. Pull the engine down the road and the studs come right back out and go back in.\u003c\/p\u003e\n\n\u003ch4\u003eBuilt for Serious Clamp\u003c\/h4\u003e\n\n\u003cp\u003eThese are M12 M-series studs machined from the highest-grade premium American alloy, heat treated and tested. With a 230,000 psi minimum tensile strength, they clamp far harder than the factory bolts ever could, which is exactly what a J-series needs once it's making real cylinder pressure from boost or a built bottom end.\u003c\/p\u003e\n\n\u003ch4\u003eNo Hydrogen Embrittlement\u003c\/h4\u003e\n\n\u003cp\u003eA lot of high-strength studs on the market are made from L19 or H11. Strong material, but it comes with a catch: both are prone to hydrogen embrittlement. Leave them exposed to moisture, skip the oil, or handle them carelessly, and they can crack later on. This alloy doesn't carry that weakness. You can handle them, install them, and leave them in the engine without treating them like they might turn on you.\u003c\/p\u003e\n\n\u003ch4\u003eTrue-Beam Design\u003c\/h4\u003e\n\n\u003cp\u003ePlenty of competitor studs have a thinner section machined into the middle, necked down or undercut. These don't. The beam runs full diameter end to end. A full-diameter beam flexes less and puts more of your torque into holding the head down instead of into stretching the stud, which also keeps your torque readings honest when you tighten the nuts.\u003c\/p\u003e\n\n\u003ch4\u003eWhat's in the Kit\u003c\/h4\u003e\n\n\u003cp\u003eStuds, nuts, washers, assembly lube, and instructions. Everything the job takes, in the box.\u003c\/p\u003e\n\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\n\u003cp\u003eThese head studs fit the J32, J35, and J37 J-series V6 engines in:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e2001-2003 Acura CL \/ CL Type S\u003c\/li\u003e\n\u003cli\u003e2013-2018 Acura RDX\u003c\/li\u003e\n\u003cli\u003e2009-2012 Acura RL\u003c\/li\u003e\n\u003cli\u003e2014-2020 Acura RLX\u003c\/li\u003e\n\u003cli\u003e1999-2003 Acura TL \/ TL Type S\u003c\/li\u003e\n\u003cli\u003e2004-2008 Acura TL \/ TL Type S\u003c\/li\u003e\n\u003cli\u003e2009-2014 Acura TL Base \/ TL SH-AWD\u003c\/li\u003e\n\u003cli\u003e2015-2020 Acura TLX\u003c\/li\u003e\n\u003cli\u003e2010-2014 Acura TSX\u003c\/li\u003e\n\u003cli\u003e2010-2013 Acura ZDX\u003c\/li\u003e\n\u003cli\u003e2003-2017 Honda Accord\u003c\/li\u003e\n\u003cli\u003e2013-2015 Honda Crosstour\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\n\u003cp\u003eThis is a job for when the head is off, during a gasket or head service. Spin each stud into the block by hand only, never torqued down into the block itself, and let the nuts up top do the work. Lube the threads and the underside of the nuts with what's in the kit, because dry threads throw off your torque wrench and leave the head under-clamped. Then work up to spec in stages, in the sequence the instructions give, and the head is clamped down for whatever the J-series throws at it.\u003c\/p\u003e\n\u003c\/li\u003e\n\n \n\u003cli id=\"VehicleFitment\"\u003e\n \u003cp\u003e2001-2003 Acura CL\/CL Type S\u003cbr\u003e2013-2018 Acura RDX\u003cbr\u003e2009-2012 Acura RL\u003cbr\u003e2014-2020 Acura RLX\u003cbr\u003e1999-2003 Acura TL\/TL Type S\u003cbr\u003e2004-2008 Acura TL\/TL Type S\u003cbr\u003e2009-2014 Acura TL Base\/TL SH-AWD\u003cbr\u003e2015-2020 Acura TLX\u003cbr\u003e2010-2014 Acura TSX\u003cbr\u003e2010-2013 Acura ZDX\u003cbr\u003e2003-2017 Honda Accord\u003cbr\u003e2013-2015 Honda Crosstour\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e \n\u003c\/li\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\u003c\/ul\u003e\n","brand":"InlinePro","offers":[{"title":"Default Title","offer_id":69886752325666,"sku":"ILP-HS-J","price":499.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2218\/5701\/files\/ILP-HS-J_jem1.jpg?v=1794804932"},{"product_id":"inline-pro-egr-block-off-00-09-honda-s2000","title":"InlinePro EGR Block Off for 00-09 Honda S2000","description":"\u003cul\u003e\n\u003cli\u003eSeals the EGR Port Clean \u003c\/li\u003e\n\u003cli\u003eMachined 6061 Billet, Black Anodized \u003c\/li\u003e\n\u003cli\u003eMounting Hardware Included \u003c\/li\u003e\n\u003cli\u003eDirect Fit for 00-09 S2000 \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- split --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli\u003e\u003ca class=\"active\" href=\"#Description\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\n \u003cli\u003e\u003ca href=\"#VehicleFitment\"\u003eVehicle Fitment\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\n\n\u003cli class=\"active\" id=\"Description\"\u003e\n\u003ch3\u003eInlinePro EGR Block-Off Plate - 2000-2009 Honda S2000\u003c\/h3\u003e\n\n\u003cp\u003eThe EGR system routes a small amount of exhaust gas back into the intake to lower combustion temperatures and cut emissions. It does its job on a stock street car, but once you start working on the engine it becomes a passage a lot of people would rather seal off. This InlinePro block-off plate caps the EGR port cleanly, which is why it tends to go on during intake manifold swaps, header work, or any build where you want exhaust gas kept out of the intake side and the engine bay tidied up.\u003c\/p\u003e\n\n\u003cp\u003eThere are two reasons people run one. The first is a cleaner setup: blocking the EGR keeps recirculated exhaust and the carbon it leaves behind out of your intake tract. The second is simply the look, since a machined billet plate finishes off that part of the engine far better than the factory hardware. On a lot of aftermarket intake manifolds the EGR provision isn't there anyway, and this is the plate that seals the port when you make that switch.\u003c\/p\u003e\n\n\u003ch4\u003eBuilt from Billet, Black Anodized\u003c\/h4\u003e\n\n\u003cp\u003eThe plate is machined from 6061 billet aluminum, so it's solid, flat, and seals properly against the port rather than warping or weeping over time. It's finished in a black anodized coating that resists corrosion and gives it a clean, understated look under the hood instead of raw metal. All the mounting hardware is included, with flush-mount stainless fasteners that sit clean against the plate and won't rust where they're exposed to engine heat and weather.\u003c\/p\u003e\n\n\u003ch4\u003eAn Honest Note on EGR Deletes\u003c\/h4\u003e\n\n\u003cp\u003eBe aware of what blocking the EGR means for your car. Depending on your exact setup and tune, deleting the EGR function can set a check engine light or call for tuning to clear it. EGR deletes are generally intended for off-road and race use, and they may not be emissions-legal where you live, so check your local laws before you run one on a street-driven car.\u003c\/p\u003e\n\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\n\u003cp\u003eThis EGR block-off plate fits the 2000-2009 Honda S2000.\u003c\/p\u003e\n\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\n\u003cp\u003eInstallation is straightforward: remove the factory EGR hardware, clean the mating surface so the plate seats flat, and bolt the plate down with the included stainless hardware. A fresh gasket or sealant at the surface makes for a clean seal, and snug the hardware evenly so the plate sits flush against the port.\u003c\/p\u003e\n\u003c\/li\u003e\n\n \n\u003cli id=\"VehicleFitment\"\u003e\n \u003cp\u003e2000-2009 Honda S2000\u003c\/p\u003e \n\u003c\/li\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\u003c\/ul\u003e\n","brand":"InlinePro","offers":[{"title":"Default Title","offer_id":69886914232354,"sku":"ILP-S2K-EGR","price":59.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2218\/5701\/files\/ILP-S2K-EGR_t5zq.jpg?v=1794805462"},{"product_id":"inline-pro-xtreme-duty-alloy-head-studs-b16a-b18c-ls-vtec","title":"InlinePro Xtreme Duty Alloy Head Studs for B16A\/B18C\/LS VTEC","description":"\u003cul\u003e\n\u003cli\u003eHolds the Head Down under Boost and Serious NA Builds \u003c\/li\u003e\n\u003cli\u003eResists Hydrogen Embrittlement, Unlike L19\/H11 \u003c\/li\u003e\n\u003cli\u003e230kpsi M11 Premium American Alloy \u003c\/li\u003e\n\u003cli\u003eCovers VTEC and LS\/VTEC Builds \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- split --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli\u003e\u003ca class=\"active\" href=\"#Description\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\n \u003cli\u003e\u003ca href=\"#VehicleFitment\"\u003eVehicle Fitment\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\n\n\u003cli class=\"active\" id=\"Description\"\u003e\n\u003ch3\u003eInlinePro Xtreme Duty Alloy Head Studs - B16A \/ B18C \/ LS VTEC\u003c\/h3\u003e\n\n\u003cp\u003eThe B-series is the Honda engine everyone builds, and once you start adding power the factory head bolts become the limit. Combustion pressure pushes the head up off the block on every power stroke, and the stock torque-to-yield bolts only hold so much before the head lifts and the gasket gives up. That turns into coolant in the oil, oil in the coolant, or a lost cylinder between chambers. Head studs stop it. On a boosted B16, a built B18C, or an LS\/VTEC making real power, they're one of the first upgrades the engine needs before you lean on it.\u003c\/p\u003e\n\n\u003ch4\u003eWhy Studs Beat Factory Bolts\u003c\/h4\u003e\n\n\u003cp\u003eA torque-to-yield bolt is a one-time part. You torque it, it stretches past its yield point by design, and the hold you get is whatever's left when it stops stretching. Reuse one and it's weaker still. A stud works nothing like that. It threads into the block finger-tight with no load on it, and the nut on top does the actual clamping. You torque the nut to a real, repeatable number, the load spreads evenly across the head, and the head stays put under boost. Pull the engine apart down the road and the studs come right back out and go back in.\u003c\/p\u003e\n\n\u003ch4\u003eBuilt for Serious Clamp\u003c\/h4\u003e\n\n\u003cp\u003eThese are M11 M-series studs machined from the highest-grade premium American alloy, heat treated and tested. With a 230,000 psi minimum tensile strength, they clamp far harder than the factory bolts ever could, which is exactly what a built B-series needs once it's making real cylinder pressure from boost or a high-compression setup.\u003c\/p\u003e\n\n\u003ch4\u003eNo Hydrogen Embrittlement\u003c\/h4\u003e\n\n\u003cp\u003eA lot of high-strength studs on the market are made from L19 or H11. Strong material, but it comes with a catch: both are prone to hydrogen embrittlement. Leave them exposed to moisture, skip the oil, or handle them carelessly, and they can crack later on. This alloy doesn't carry that weakness. You can handle them, install them, and leave them in the engine without treating them like they might turn on you.\u003c\/p\u003e\n\n\u003ch4\u003eTrue-Beam Design\u003c\/h4\u003e\n\n\u003cp\u003ePlenty of competitor studs have a thinner section machined into the middle, necked down or undercut. These don't. The beam runs full diameter end to end. A full-diameter beam flexes less and puts more of your torque into holding the head down instead of into stretching the stud, which also keeps your torque readings honest when you tighten the nuts.\u003c\/p\u003e\n\n\u003ch4\u003eWhat's in the Kit\u003c\/h4\u003e\n\n\u003cp\u003eStuds, nuts, washers, assembly lube, and instructions. Everything the job takes, in the box.\u003c\/p\u003e\n\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\n\u003cp\u003eThese head studs fit any B-series engine running a B16A or B18C VTEC cylinder head, which covers:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e1999-2000 Honda Civic Si (B16A2)\u003c\/li\u003e\n\u003cli\u003e1994-1997 Honda del Sol VTEC (B16A3)\u003c\/li\u003e\n\u003cli\u003e1997-2001 Acura Integra Type R (B18C5)\u003c\/li\u003e\n\u003cli\u003e1994-2001 Acura Integra GS-R (B18C)\u003c\/li\u003e\n\u003cli\u003e1994-2001 Acura Integra LS\/GS\/RS running a B16A or B18C head (LS\/VTEC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIf you're building an LS\/VTEC, these are the studs for the VTEC head on your LS bottom end.\u003c\/p\u003e\n\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\n\u003cp\u003eThis is a job for when the head is off, during a gasket or head service. Spin each stud into the block by hand only, never torqued down into the block itself, and let the nuts up top do the work. Lube the threads and the underside of the nuts with what's in the kit, because dry threads throw off your torque wrench and leave the head under-clamped. Then work up to spec in stages, in the sequence the instructions give, and the head is clamped down for whatever the B-series throws at it.\u003c\/p\u003e\n\u003c\/li\u003e\n\n \n\u003cli id=\"VehicleFitment\"\u003e\n \u003cp\u003e1994-2001 Acura Integra\u003cbr\u003e1999-2000 Honda Civic Si\u003cbr\u003e1994-1997 Honda Del Sol VTEC\u003c\/p\u003e \n\u003c\/li\u003e\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\u003c\/ul\u003e\n","brand":"InlinePro","offers":[{"title":"B16A","offer_id":69888059768866,"sku":"ILP-HS-B16","price":249.95,"currency_code":"USD","in_stock":false},{"title":"B18C","offer_id":69888059801634,"sku":"ILP-HS-B18C","price":249.95,"currency_code":"USD","in_stock":false},{"title":"LS VTEC","offer_id":69888059834402,"sku":"ILP-HS-LSVTEC","price":249.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2218\/5701\/files\/inlinepro-xtreme-duty-alloy-he_3uay.jpg?v=1794808057"}],"url":"https:\/\/www.hybrid-racing.com\/collections\/inlinepro.oembed","provider":"Hybrid Racing","version":"1.0","type":"link"}