| |
Here you will find instructions on how to install your Hybrid Racing 92-95 Honda Civic / 94-2001 Acura Integra K-series conversion harnesses. |
 |
|
Begin by removing the battery, battery tray and fuse box. (1) |
|
|
Locate the wires that run on the passenger side shock tower that connect to the stock B/D series engine harness. Disconnect and secure these wires under the battery tray with the supplied zip ties. (2) |
|
|
Remove the grommet from the firewall. Once removed make a small slit down the side of the grommet. You will not be able to fully remove the harness from the car. (3) |
|
|
Route the K series engine harness through the firewall on the passenger side utilizing the factory grommet. Start by inserting one connector at a time working your way up to the larger gray connector. You will need to remove the black and white grommet on the K series engine harness. (4) (5) (6) (7) |
|
|
Locate and remove your factory ECU. This should be located under the passenger side dashboard. Remove the lower kick panel to access the ECU. (8) |
|
|
Secure your K series ECU in the stock ECU location using 2 of the original mounting bolts. |
|
|
Insert connector A and B on your K series engine harness into your K series ECU. You should have a gray connector left on your K series engine harness. (9) |
|
|
|
|
