Hondata 4 Bar Map Sensor (K-Series)

Choose a car to confirm fitment.

Description

The Hondata 4 bar map sensor is a plug compatible replacement for the Honda factory MAP sensor. It is a direct replacement for the K-series Honda engines. This plug in sensor takes less than 60 seconds to install and eliminates the risk of sensor damage that often occurs when attempting to wire in other types of MAP sensors.

Wait, 4 bars of what?
The Bar is a measure of pressure, like PSI or Pascals. 4 bars is equal to (approximately) 58 PSI or 400 kPa. The stock Honda K series MAP sensor is only effective to about 11psi. So if you intend to run a turbo or supercharger setup that will approach or exceed around 11 pounds of boost, it is necessary to also use this MAP sensor so that your ECU can get accurate plenum pressure readings. Getting an accurate pressure reading is critical to maintaining a correct air/fuel ratio, because the reading that the MAP sensor sends the ECU is used to calculate exactly how much air is being forced into the engine.

What engines and vehicles will this work with?
The sensor is designed to work with most OEM K-series throttle bodies. It will also work on BDL throttle bodies designed for the K series motor.

The specific vehicles it will work with are the following (of course, it will also work in any engine swapped vehicles that have a motor from one of the cars in this list):

02-06 Acura RSX Type-S
02-06 Acura RSX Base
02-05 Honda Civic EP3
05+ Honda S2000
01-05 Civic (all models)
Show More ...
Quick Overview
• Hondata 4 Bar Map for K-series
• Connects directly to K-series engine harness
• A necessity for boosted engines where plenum pressure exceeds 11psi

Hondata 4 Bar Map Sensor (K-Series)

Choose a car to confirm fitment.

$99.00

Availability: Availability: 1 In Stock!

Availability: Availability: 1 In Stock!

$99.00

Only 1 left

Additional Information

  • SKU:
    HON-4 Bar Map K-Series
  • Brand:
    Hondata
  • Fitment Notes:
    w/ K-Series Engine

Description

The Hondata 4 bar map sensor is a plug compatible replacement for the Honda factory MAP sensor. It is a direct replacement for the K-series Honda engines. This plug in sensor takes less than 60 seconds to install and eliminates the risk of sensor damage that often occurs when attempting to wire in other types of MAP sensors. Wait, 4 bars of what? The Bar is a measure of pressure, like PSI or Pascals. 4 bars is equal to (approximately) 58 PSI or 400 kPa. The stock Honda K series MAP sensor is only effective to about 11psi. So if you intend to run a turbo or supercharger setup that will approach or exceed around 11 pounds of boost, it is necessary to also use this MAP sensor so that your ECU can get accurate plenum pressure readings. Getting an accurate pressure reading is critical to maintaining a correct air/fuel ratio, because the reading that the MAP sensor sends the ECU is used to calculate exactly how much air is being forced into the engine. What engines and vehicles will this work with? The sensor is designed to work with most OEM K-series throttle bodies. It will also work on BDL throttle bodies designed for the K series motor. The specific vehicles it will work with are the following (of course, it will also work in any engine swapped vehicles that have a motor from one of the cars in this list): 02-06 Acura RSX Type-S 02-06 Acura RSX Base 02-05 Honda Civic EP3 05+ Honda S2000 01-05 Civic (all models)
VIEW MORE

Customer Reviews Review This Product

Write Your Own Review

You're reviewing: Hondata 4 Bar Map Sensor (K-Series)

How do you rate this product? *

    • 1
    • 2
    • 3
    • 4
    • 5

Vehicle Fitments

Start Year End Year Make Model Sub Model O.E.M. Engine Liter Size Notes
  • Will, you guys have made my swap a reality. I can’t thank you enough. It’s not that it would be 100% impossible without swap products, I just wouldn’t have had the time to do it otherwise.
  • I am surprised on how fast you respond. It’s almost like you are waiting for my e-mail lol. Thanks alot Mike Ellis
  • Thanks Will, You guys are awesome! For those of you reading, I ask a lot of questions. The staff at Hybrid not only answer every question I have, but do so in utmost courtesy. Every time I run into a problem, they are there to point me into the right direction. Thanks Again - Casey
Shop ByCar

Ops, you don’t have a vehicle selected! Make life easy! Find what you are looking for by selecting your vehicle to confirm fitment.

Close