Hondata FlashPro (2006-20011 Civic Si)

Choose a car to confirm fitment.

Description



The FlashPro allows full user tuning and datalogging of late model performance Civics. It includes Windows based software called FlashProManager.The FlashPro connects from your laptop's USB port to your vehicles diagnostic port to provide 90 second programming with a variety of calibrations with extensive real time and stored datalogging capabilities.

Important: Make sure that you order the correct FlashPro, and that FlashPro will work with your ECU. We recommend that your check if your ECU is compatible below.

The ECU part number is located on the ECU, which is located in the engine bay next to the battery. You will need to remove a plastic cover in order to see the sticker containing the part number.

If you have a 2006 + US Civis Si flash pro will work for you if your part number is: RRB-A01 through RRB-A14


How does it compare to KPro?

KPro is a completely different product. It was created for the 02-04 RSX style ECU. It will only work on that type of ECU with the exact same Oki processor. Honda has changed the architecture of the ECU, including ECU architecture, processor and encapsulation, so that there is no way the KPro can be made to work on any other ECU.

K-Pro requires the ECU be sent to a Hondata for the installation of the K-Pro daughterboard. By comparison, new FlashPro owners need never remove the ECU from their car.

Because FlashPro is a different product from KPro, it has different features. Not all features implemented in KPro are possible with FlashPro. Developing more popular features such as nitrous control is in progress.

In the meantime, if you run nitrous, you will be able to run a calibration that is far safer and make more power than you would with a stock ECU.

FAQ

- Are there base calibrations?
Yes, for all common part combinations, plus Greddy turbo, JR and CT superchargers.

- Does it fix the rev hang?
Yes. The rev hang is the result of the injectors continuing to provide fuel for a period of time after the throttle is closed. This time is reduced by the calibrations provided with the FlashPro and the revs drop much sooner after throttle liftoff.

- Can it eliminate the second o2 sensor?
Yes. The secondary oxygen sensor is used to monitor the catalytic converter efficiency and assist with closed loop operation. For off road racing use in which a catalytic converter is not desirable, the secondary oxygen sensor can be disabled using the FlashProManager software without any negative affect on the tuning or operation of the car.

- Do I need dyno tuning?
It shouldn't be necessary for common part combinations (intake, exhaust), but you still have the option of custom tuning if you wish to get a little more. Camshafts and race headers probably will need tuning to get the most of the them - it will depend on the manufacturer.

- Can I get rid of the AFM?
You can switch to a MAP based calibration (recommended for forced induction and/or cams). You need to still physically retain the AFM because it also contains the IAT sensor.

- What about smog with a MAP calibration?
According to US and CA law the FlashPro is for off road use only. However, if you did smog with you would find the readiness codes supported and complete as long as your emissions systems are intact and working.

- Will this work on R18s or automatics?
Initially the FlashPro is for the US/Canada Si and Euro/Asia CTR. ECU part numbers are listed on our website.

- Will this work on more than one vehicle?
The FlashPro is locked to one vehicle. It can be unlocked and transferred to another vehicle by returning the ECU to stock.

- Can I share the calibrations I make for my car?
Yes.

- Do I need the laptop in the vehicle to reflash the ECU?
No. The FlashPro can upload either with or without a laptop.

- Is there a VTEC window?
Yes. This means that VTEC will operate based on rpm and engine load. For example, the supercharger reflashes have a VTEC window from 3200 rpm - 6000 rpm. At full throttle, VTEC operates at 3200 rpm. At light throttle, VTEC operates at 6000 rpm, and for load between full and light the VTEC will shift between 3200 rpm and 6000 rpm.

- So does that mean 1 unit Hondata FlashPro can only work with one ecu or car only? Which mean I can't buy one FlashPro and use it together with a few of my buddies Civics?
One ECU and vehicle at a time. You can unlock the FlashPro by returning the ECU to stock, and then transfer to another vehicle.

- Any option of immobilizer control?
The immobilizer can not be disabled. We've implemented a number of features designed to protect the owner of the vehicle from theft, and one of these is not to allow the immobilizer to be disabled. This is going to be much less of an issue than previous products because the ECU does not need to be removed / swapped.

- 90 sec programming - does that mean it can't do real time tuning?
Correct. In any case, if you are tuning a vehicle, you need to wait longer than 90 seconds between dyno runs in order to maintain consistency between runs. If you think you could set the dyno up as constant rpm or load, and then tune each cell in each table, this type of tuning does not work because the engine temperature and therefore output changes fairly rapidly, prohibiting this type of tuning.

- If the ECU had been reflashed by another maker, can FlashPro still work?
Probably - we could tell you based off the ECU part & serial numbers plus the calibration ID. When you unlock the FlashPro it will only be reflashed back to a stock calibration.

-Will this support a 64-Bit Windows Vista?
Yes.

- Can it control nitrous?
No. However, you can at least control the ignition timing to make nitrous safer.

- Will dealers need a software license?
No. Every FlashPro will come with the full tuning software FlashProManager.

- Do I need to send my ECU to Hondata?
No. Your ECU does not need to be modified for FlashPro.





Show More ...
Quick Overview
• Programmable ECU interface.
• 2006-2011 US Civic Si
• No ECU modification necessary.
• 20 hours on board data logging memory.
• Check and clear diagnostic codes.
• Custom laptop gauges.
• Dual calibration storage - upload from one of two calibrations stored in the FlashPro

Hondata FlashPro (2006-20011 Civic Si)

Choose a car to confirm fitment.

$695.00

Availability: Ships in 2-3 Days

Availability: Ships in 2-3 Days

$695.00

Additional Information

  • SKU:
    HON-FP-SI-US
  • Brand:
    Hondata
  • Fitment Notes:
    N/A

Description

The FlashPro allows full user tuning and datalogging of late model performance Civics. It includes Windows based software called FlashProManager.The FlashPro connects from your laptop's USB port to your vehicles diagnostic port to provide 90 second programming with a variety of calibrations with extensive real time and stored datalogging capabilities. Important: Make sure that you order the correct FlashPro, and that FlashPro will work with your ECU. We recommend that your check if your ECU is compatible below. The ECU part number is located on the ECU, which is located in the engine bay next to the battery. You will need to remove a plastic cover in order to see the sticker containing the part number. If you have a 2006 + US Civis Si flash pro will work for you if your part number is: RRB-A01 through RRB-A14 How does it compare to KPro? KPro is a completely different product. It was created for the 02-04 RSX style ECU. It will only work on that type of ECU with the exact same Oki processor. Honda has changed the architecture of the ECU, including ECU architecture, processor and encapsulation, so that there is no way the KPro can be made to work on any other ECU. K-Pro requires the ECU be sent to a Hondata for the installation of the K-Pro daughterboard. By comparison, new FlashPro owners need never remove the ECU from their car. Because FlashPro is a different product from KPro, it has different features. Not all features implemented in KPro are possible with FlashPro. Developing more popular features such as nitrous control is in progress. In the meantime, if you run nitrous, you will be able to run a calibration that is far safer and make more power than you would with a stock ECU. FAQ - Are there base calibrations? Yes, for all common part combinations, plus Greddy turbo, JR and CT superchargers. - Does it fix the rev hang? Yes. The rev hang is the result of the injectors continuing to provide fuel for a period of time after the throttle is closed. This time is reduced by the calibrations provided with the FlashPro and the revs drop much sooner after throttle liftoff. - Can it eliminate the second o2 sensor? Yes. The secondary oxygen sensor is used to monitor the catalytic converter efficiency and assist with closed loop operation. For off road racing use in which a catalytic converter is not desirable, the secondary oxygen sensor can be disabled using the FlashProManager software without any negative affect on the tuning or operation of the car. - Do I need dyno tuning? It shouldn't be necessary for common part combinations (intake, exhaust), but you still have the option of custom tuning if you wish to get a little more. Camshafts and race headers probably will need tuning to get the most of the them - it will depend on the manufacturer. - Can I get rid of the AFM? You can switch to a MAP based calibration (recommended for forced induction and/or cams). You need to still physically retain the AFM because it also contains the IAT sensor. - What about smog with a MAP calibration? According to US and CA law the FlashPro is for off road use only. However, if you did smog with you would find the readiness codes supported and complete as long as your emissions systems are intact and working. - Will this work on R18s or automatics? Initially the FlashPro is for the US/Canada Si and Euro/Asia CTR. ECU part numbers are listed on our website. - Will this work on more than one vehicle? The FlashPro is locked to one vehicle. It can be unlocked and transferred to another vehicle by returning the ECU to stock. - Can I share the calibrations I make for my car? Yes. - Do I need the laptop in the vehicle to reflash the ECU? No. The FlashPro can upload either with or without a laptop. - Is there a VTEC window? Yes. This means that VTEC will operate based on rpm and engine load. For example, the supercharger reflashes have a VTEC window from 3200 rpm - 6000 rpm. At full throttle, VTEC operates at 3200 rpm. At light throttle, VTEC operates at 6000 rpm, and for load between full and light the VTEC will shift between 3200 rpm and 6000 rpm. - So does that mean 1 unit Hondata FlashPro can only work with one ecu or car only? Which mean I can't buy one FlashPro and use it together with a few of my buddies Civics? One ECU and vehicle at a time. You can unlock the FlashPro by returning the ECU to stock, and then transfer to another vehicle. - Any option of immobilizer control? The immobilizer can not be disabled. We've implemented a number of features designed to protect the owner of the vehicle from theft, and one of these is not to allow the immobilizer to be disabled. This is going to be much less of an issue than previous products because the ECU does not need to be removed / swapped. - 90 sec programming - does that mean it can't do real time tuning? Correct. In any case, if you are tuning a vehicle, you need to wait longer than 90 seconds between dyno runs in order to maintain consistency between runs. If you think you could set the dyno up as constant rpm or load, and then tune each cell in each table, this type of tuning does not work because the engine temperature and therefore output changes fairly rapidly, prohibiting this type of tuning. - If the ECU had been reflashed by another maker, can FlashPro still work? Probably - we could tell you based off the ECU part & serial numbers plus the calibration ID. When you unlock the FlashPro it will only be reflashed back to a stock calibration. -Will this support a 64-Bit Windows Vista? Yes. - Can it control nitrous? No. However, you can at least control the ignition timing to make nitrous safer. - Will dealers need a software license? No. Every FlashPro will come with the full tuning software FlashProManager. - Do I need to send my ECU to Hondata? No. Your ECU does not need to be modified for FlashPro.
VIEW MORE

Customer Reviews Review This Product

Write Your Own Review

You're reviewing: Hondata FlashPro (2006-20011 Civic Si)

How do you rate this product? *

    • 1
    • 2
    • 3
    • 4
    • 5

Vehicle Fitments

Start Year End Year Make Model Sub Model O.E.M. Engine Liter Size Notes
  • Will, you guys have made my swap a reality. I can’t thank you enough. It’s not that it would be 100% impossible without swap products, I just wouldn’t have had the time to do it otherwise.
  • I am surprised on how fast you respond. It’s almost like you are waiting for my e-mail lol. Thanks alot Mike Ellis
  • Thanks Will, You guys are awesome! For those of you reading, I ask a lot of questions. The staff at Hybrid not only answer every question I have, but do so in utmost courtesy. Every time I run into a problem, they are there to point me into the right direction. Thanks Again - Casey
Shop ByCar

Ops, you don’t have a vehicle selected! Make life easy! Find what you are looking for by selecting your vehicle to confirm fitment.

Close